You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
479 lines
17 KiB
479 lines
17 KiB
4 months ago
|
/*
|
||
|
|
* Copyright 2016 The Android Open Source Project
|
||
|
|
*
|
||
|
|
* Licensed under the Apache License, Version 2.0 (the "License");
|
||
|
|
* you may not use this file except in compliance with the License.
|
||
|
|
* You may obtain a copy of the License at
|
||
|
|
*
|
||
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||
|
|
*
|
||
|
|
* Unless required by applicable law or agreed to in writing, software
|
||
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
||
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||
|
|
* See the License for the specific language governing permissions and
|
||
|
|
* limitations under the License.
|
||
|
|
*/
|
||
|
|
|
||
|
|
package android.hardware.wifi.supplicant@1.0;
|
||
|
|
|
||
|
|
import ISupplicantIface;
|
||
|
|
import ISupplicantStaIfaceCallback;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Interface exposed by the supplicant for each station mode network
|
||
|
|
* interface (e.g wlan0) it controls.
|
||
|
|
*/
|
||
|
|
interface ISupplicantStaIface extends ISupplicantIface {
|
||
|
|
/**
|
||
|
|
* Access Network Query Protocol info ID elements
|
||
|
|
* for IEEE Std 802.11u-2011.
|
||
|
|
*/
|
||
|
|
enum AnqpInfoId : uint16_t {
|
||
|
|
VENUE_NAME = 258,
|
||
|
|
ROAMING_CONSORTIUM = 261,
|
||
|
|
IP_ADDR_TYPE_AVAILABILITY = 262,
|
||
|
|
NAI_REALM = 263,
|
||
|
|
ANQP_3GPP_CELLULAR_NETWORK = 264,
|
||
|
|
DOMAIN_NAME = 268
|
||
|
|
};
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Access Network Query Protocol subtype elements
|
||
|
|
* for Hotspot 2.0.
|
||
|
|
*/
|
||
|
|
enum Hs20AnqpSubtypes : uint32_t {
|
||
|
|
OPERATOR_FRIENDLY_NAME = 3,
|
||
|
|
WAN_METRICS = 4,
|
||
|
|
CONNECTION_CAPABILITY = 5,
|
||
|
|
OSU_PROVIDERS_LIST = 8,
|
||
|
|
};
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Enum describing the types of RX filter supported
|
||
|
|
* via driver commands.
|
||
|
|
*/
|
||
|
|
enum RxFilterType : uint8_t {
|
||
|
|
V4_MULTICAST = 0,
|
||
|
|
V6_MULTICAST = 1
|
||
|
|
};
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Enum describing the modes of BT coexistence supported
|
||
|
|
* via driver commands.
|
||
|
|
*/
|
||
|
|
enum BtCoexistenceMode : uint8_t {
|
||
|
|
ENABLED = 0,
|
||
|
|
DISABLED = 1,
|
||
|
|
SENSE = 2
|
||
|
|
};
|
||
|
|
|
||
|
|
enum ExtRadioWorkDefaults : uint32_t {
|
||
|
|
TIMEOUT_IN_SECS = 10
|
||
|
|
};
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Register for callbacks from this interface.
|
||
|
|
*
|
||
|
|
* These callbacks are invoked for events that are specific to this interface.
|
||
|
|
* Registration of multiple callback objects is supported. These objects must
|
||
|
|
* be automatically deleted when the corresponding client process is dead or
|
||
|
|
* if this interface is removed.
|
||
|
|
*
|
||
|
|
* @param callback An instance of the |ISupplicantStaIfaceCallback| HIDL
|
||
|
|
* interface object.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
*/
|
||
|
|
registerCallback(ISupplicantStaIfaceCallback callback)
|
||
|
|
generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Reconnect to the currently active network, even if we are already
|
||
|
|
* connected.
|
||
|
|
*
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_DISABLED|
|
||
|
|
*/
|
||
|
|
reassociate() generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Reconnect to the currently active network, if we are currently
|
||
|
|
* disconnected.
|
||
|
|
*
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_DISABLED|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_NOT_DISCONNECTED|
|
||
|
|
*/
|
||
|
|
reconnect() generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Disconnect from the current active network.
|
||
|
|
*
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_DISABLED|
|
||
|
|
*/
|
||
|
|
disconnect() generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Turn on/off power save mode for the interface.
|
||
|
|
*
|
||
|
|
* @param enable Indicate if power save is to be turned on/off.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_DISABLED|
|
||
|
|
*/
|
||
|
|
setPowerSave(bool enable) generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Initiate TDLS discover with the provided peer MAC address.
|
||
|
|
*
|
||
|
|
* @param macAddress MAC address of the peer.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
*/
|
||
|
|
initiateTdlsDiscover(MacAddress macAddress)
|
||
|
|
generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Initiate TDLS setup with the provided peer MAC address.
|
||
|
|
*
|
||
|
|
* @param macAddress MAC address of the peer.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
*/
|
||
|
|
initiateTdlsSetup(MacAddress macAddress)
|
||
|
|
generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Initiate TDLS teardown with the provided peer MAC address.
|
||
|
|
*
|
||
|
|
* @param macAddress MAC address of the peer.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
*/
|
||
|
|
initiateTdlsTeardown(MacAddress macAddress)
|
||
|
|
generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Initiate ANQP (for IEEE 802.11u Interworking/Hotspot 2.0) queries with the
|
||
|
|
* specified access point.
|
||
|
|
* The ANQP data fetched must be returned in the
|
||
|
|
* |ISupplicantStaIfaceCallback.onAnqpQueryDone| callback.
|
||
|
|
*
|
||
|
|
* @param macAddress MAC address of the access point.
|
||
|
|
* @param infoElements List of information elements to query for.
|
||
|
|
* @param subtypes List of HS20 subtypes to query for.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
*/
|
||
|
|
initiateAnqpQuery(MacAddress macAddress,
|
||
|
|
vec<AnqpInfoId> infoElements,
|
||
|
|
vec<Hs20AnqpSubtypes> subTypes)
|
||
|
|
generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Initiate the Hotspot 2.0 icon query with the specified accesss point.
|
||
|
|
* The icon data fetched must be returned in the
|
||
|
|
* |ISupplicantStaIfaceCallback.onHs20IconQueryDone| callback.
|
||
|
|
*
|
||
|
|
* @param macAddress MAC address of the access point.
|
||
|
|
* @param fileName Name of the file to request from the access point.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
*/
|
||
|
|
initiateHs20IconQuery(MacAddress macAddress, string fileName)
|
||
|
|
generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Send driver command to get MAC address of the device.
|
||
|
|
*
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
* @return macAddr MAC address of the device.
|
||
|
|
*/
|
||
|
|
getMacAddress()
|
||
|
|
generates (SupplicantStatus status, MacAddress macAddr);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Send driver command to start RX filter.
|
||
|
|
*
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
*/
|
||
|
|
startRxFilter() generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Send driver command to stop RX filter.
|
||
|
|
*
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
*/
|
||
|
|
stopRxFilter() generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Send driver command to add the specified RX filter.
|
||
|
|
*
|
||
|
|
* @param type Type of filter.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
*/
|
||
|
|
addRxFilter(RxFilterType type)
|
||
|
|
generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Send driver command to remove the specified RX filter.
|
||
|
|
*
|
||
|
|
* @param type Type of filter.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
*/
|
||
|
|
removeRxFilter(RxFilterType type)
|
||
|
|
generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Send driver command to set Bluetooth coexistence mode.
|
||
|
|
*
|
||
|
|
* @param mode Mode of Bluetooth coexistence.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
*/
|
||
|
|
setBtCoexistenceMode(BtCoexistenceMode mode)
|
||
|
|
generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Send driver command to set Bluetooth coexistence scan mode.
|
||
|
|
* When this mode is on, some of the low-level scan parameters
|
||
|
|
* used by the driver are changed to reduce interference
|
||
|
|
* with A2DP streaming.
|
||
|
|
*
|
||
|
|
* @param enable true to enable, false to disable.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
*/
|
||
|
|
setBtCoexistenceScanModeEnabled(bool enable)
|
||
|
|
generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Send driver command to set suspend optimizations for power save.
|
||
|
|
*
|
||
|
|
* @param enable true to enable, false to disable.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
*/
|
||
|
|
setSuspendModeEnabled(bool enable)
|
||
|
|
generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Send driver command to set country code.
|
||
|
|
*
|
||
|
|
* @param code 2 byte country code (as defined in ISO 3166) to set.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
*/
|
||
|
|
setCountryCode(int8_t[2] code)
|
||
|
|
generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Initiate WPS setup in registrar role to learn the current AP configuration.
|
||
|
|
*
|
||
|
|
* @param bssid BSSID of the AP.
|
||
|
|
* @param pin Pin of the AP.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
*/
|
||
|
|
startWpsRegistrar(Bssid bssid, string pin)
|
||
|
|
generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Initiate WPS Push Button setup.
|
||
|
|
* The PBC operation requires that a button is also pressed at the
|
||
|
|
* AP/Registrar at about the same time (2 minute window).
|
||
|
|
*
|
||
|
|
* @param bssid BSSID of the AP. Use zero'ed bssid to indicate wildcard.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
*/
|
||
|
|
startWpsPbc(Bssid bssid) generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Initiate WPS Pin Keypad setup.
|
||
|
|
*
|
||
|
|
* @param pin 8 digit pin to be used.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
*/
|
||
|
|
startWpsPinKeypad(string pin) generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Initiate WPS Pin Display setup.
|
||
|
|
*
|
||
|
|
* @param bssid BSSID of the AP. Use zero'ed bssid to indicate wildcard.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
* @return generatedPin 8 digit pin generated.
|
||
|
|
*/
|
||
|
|
startWpsPinDisplay(Bssid bssid)
|
||
|
|
generates (SupplicantStatus status, string generatedPin);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Cancel any ongoing WPS operations.
|
||
|
|
*
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
*/
|
||
|
|
cancelWps() generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Use external processing for SIM/USIM operations
|
||
|
|
*
|
||
|
|
* @param useExternalSim true to use external, false otherwise.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
||
|
|
*/
|
||
|
|
setExternalSim(bool useExternalSim) generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* External programs can request supplicant to not start offchannel
|
||
|
|
* operations during other tasks that may need exclusive control of the
|
||
|
|
* radio.
|
||
|
|
*
|
||
|
|
* This method can be used to reserve a slot for radio access. If freq is
|
||
|
|
* specified, other radio work items on the same channel can be completed in
|
||
|
|
* parallel. Otherwise, all other radio work items are blocked during
|
||
|
|
* execution. Timeout must be set to |ExtRadioWorkDefaults.TIMEOUT_IN_SECS|
|
||
|
|
* seconds by default to avoid blocking supplicant operations on the iface
|
||
|
|
* for excessive time. If a longer (or shorter) safety timeout is needed,
|
||
|
|
* that may be specified with the optional timeout parameter. This command
|
||
|
|
* returns an identifier for the radio work item.
|
||
|
|
*
|
||
|
|
* Once the radio work item has been started,
|
||
|
|
* |ISupplicant.onExtRadioWorkStart| callback is indicated that the external
|
||
|
|
* processing can start.
|
||
|
|
*
|
||
|
|
* @param name Name for the radio work being added.
|
||
|
|
* @param freqInMhz Frequency to specify. Set to 0 for all channels.
|
||
|
|
* @param timeoutInSec Timeout tospecify. Set to 0 for default timeout.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|
|
||
|
|
* @return id Identifier for this radio work.
|
||
|
|
*/
|
||
|
|
addExtRadioWork(string name, uint32_t freqInMhz, uint32_t timeoutInSec)
|
||
|
|
generates (SupplicantStatus status, uint32_t id);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Indicates to supplicant that the external radio work has completed.
|
||
|
|
* This allows other radio works to be performed. If this method is not
|
||
|
|
* invoked (e.g., due to the external program terminating), supplicant
|
||
|
|
* must time out the radio work item on the iface and send
|
||
|
|
* |ISupplicantCallback.onExtRadioWorkTimeout| event to indicate
|
||
|
|
* that this has happened.
|
||
|
|
*
|
||
|
|
* This method may also be used to cancel items that have been scheduled
|
||
|
|
* via |addExtRadioWork|, but have not yet been started (notified via
|
||
|
|
* |ISupplicantCallback.onExtRadioWorkStart|).
|
||
|
|
*
|
||
|
|
* @return id Identifier generated for the radio work addition
|
||
|
|
* (using |addExtRadioWork|).
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|
|
||
|
|
*/
|
||
|
|
removeExtRadioWork(uint32_t id) generates (SupplicantStatus status);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Enable/Disable auto reconnect to networks.
|
||
|
|
* Use this to prevent wpa_supplicant from trying to connect to networks
|
||
|
|
* on its own.
|
||
|
|
*
|
||
|
|
* @param enable true to enable, false to disable.
|
||
|
|
* @return status Status of the operation.
|
||
|
|
* Possible status codes:
|
||
|
|
* |SupplicantStatusCode.SUCCESS|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|,
|
||
|
|
* |SupplicantStatusCode.FAILURE_IFACE_DISABLED|
|
||
|
|
*/
|
||
|
|
enableAutoReconnect(bool enable) generates (SupplicantStatus status);
|
||
|
|
};
|