v811_spc009/hardware/interfaces/wifi/supplicant/1.4/ISupplicantStaIfaceCallback.hal

/*
 * Copyright 2020 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package android.hardware.wifi.supplicant@1.4;

import @1.0::ISupplicantStaIfaceCallback.AnqpData;
import @1.0::ISupplicantStaIfaceCallback.Hs20AnqpData;
import @1.3::ISupplicantStaIfaceCallback;
import @1.0::ISupplicantStaIfaceCallback.State;
import @1.0::ISupplicantStaIfaceCallback.StatusCode;
import @1.0::Bssid;
import @1.0::Ssid;

/**
 * Callback Interface exposed by the supplicant service
 * for each station mode interface (ISupplicantStaIface).
 *
 * Clients need to host an instance of this HIDL interface object and
 * pass a reference of the object to the supplicant via the
 * corresponding |ISupplicantStaIface.registerCallback_1_4| method.
 */
interface ISupplicantStaIfaceCallback extends @1.3::ISupplicantStaIfaceCallback {
    /**
     *  MBO spec v1.2, 4.2.4 Table 14: MBO Association disallowed reason code attribute
     *  values.
     */
    enum MboAssocDisallowedReasonCode : uint8_t {
        RESERVED = 0,
        UNSPECIFIED = 1,
        MAX_NUM_STA_ASSOCIATED = 2,
        AIR_INTERFACE_OVERLOADED = 3,
        AUTH_SERVER_OVERLOADED = 4,
        INSUFFICIENT_RSSI = 5,
    };

    /**
     * ANQP data for IEEE Std 802.11-2016.
     * The format of the data within these elements follows the IEEE
     * Std 802.11-2016 standard, section 9.4.5.
     */
    struct AnqpData {
        /**
         * Baseline information as defined in HAL 1.0.
         */
        @1.0::ISupplicantStaIfaceCallback.AnqpData V1_0;

        /*
         * Container for v1.0 of this struct
         */
        vec<uint8_t> venueUrl;
    };

    /**
     * OceRssiBasedAssocRejectAttr is extracted from (Re-)Association response
     * frame from an OCE AP to indicate that the AP has rejected the
     * (Re-)Association request on the basis of insufficient RSSI.
     * Refer OCE spec v1.0 section 4.2.2 Table 7.
     */
    struct OceRssiBasedAssocRejectAttr {
        /*
         * Delta RSSI - The difference in dB between the minimum RSSI at which
         * the AP would accept a (Re-)Association request from the STA before
         * Retry Delay expires and the AP's measurement of the RSSI at which the
         * (Re-)Association request was received.
         */
        uint32_t deltaRssi;

        /*
         * Retry Delay - The time period in seconds for which the AP will not
         * accept any subsequent (Re-)Association requests from the STA, unless
         * the received RSSI has improved by Delta RSSI.
         */
        uint32_t retryDelayS;
    };

    /**
     * Association Rejection related information.
     */
    struct AssociationRejectionData {
        /**
         * SSID of the AP that rejected the association.
         */
        Ssid ssid;

        /**
         * BSSID of the AP that rejected the association.
         */
        Bssid bssid;

        /*
         * 802.11 code to indicate the reject reason.
         * Refer to section 8.4.1.9 of IEEE 802.11 spec.
         */
        StatusCode statusCode;

        /*
         * Flag to indicate that failure is due to timeout rather than
         * explicit rejection response from the AP.
         */
        bool timedOut;

        /**
         * Flag to indicate that MboAssocDisallowedReasonCode is present
         * in the (Re-)Association response frame.
         */
        bool isMboAssocDisallowedReasonCodePresent;

        /**
         * mboAssocDisallowedReason is extracted from MBO association disallowed attribute
         * in (Re-)Association response frame to indicate that the AP is not accepting new
         * associations.
         * Refer MBO spec v1.2 section 4.2.4 Table 13 for the details of reason code.
         * The value is undefined if isMboAssocDisallowedReasonCodePresent is false.
         */
        MboAssocDisallowedReasonCode mboAssocDisallowedReason;

        /**
         * Flag to indicate that OceRssiBasedAssocRejectAttr is present
         * in the (Re-)Association response frame.
         */
        bool isOceRssiBasedAssocRejectAttrPresent;

        /*
         * OCE RSSI-based (Re-)Association rejection attribute.
         * The contents are undefined if isOceRssiBasedAssocRejectAttrPresent is false.
         */
        OceRssiBasedAssocRejectAttr oceRssiBasedAssocRejectData;
    };

    /**
     * Used to indicate a Hotspot 2.0 terms and conditions acceptance is requested from the user
     * before allowing the device to get internet access.
     *
     * @param bssid BSSID of the access point.
     * @param url URL of the T&C server.
     */
    oneway onHs20TermsAndConditionsAcceptanceRequestedNotification(Bssid bssid, string url);

    /**
     * Used to indicate the result of ANQP (either for IEEE 802.11u Interworking
     * or Hotspot 2.0) query.
     *
     * @param bssid BSSID of the access point.
     * @param data ANQP data fetched from the access point.
     *        All the fields in this struct must be empty if the query failed.
     * @param hs20Data ANQP data fetched from the Hotspot 2.0 access point.
     *        All the fields in this struct must be empty if the query failed.
     */
    oneway onAnqpQueryDone_1_4(Bssid bssid, AnqpData data, Hs20AnqpData hs20Data);

    /**
     * Used to indicate an association rejection received from the AP
     * to which the connection is being attempted.
     *
     * @param assocRejectData Association Rejection related information.
     */
    oneway onAssociationRejected_1_4(AssociationRejectionData assocRejectData);

    /**
     * Used to indicate that the supplicant failed to find a network in scan result
     * which matches with the network capabilities requested by upper layer
     * for connection.
     *
     * @param ssid network name supplicant tried to connect.
     */
    oneway onNetworkNotFound(Ssid ssid);
};