v811_spc009/system/bt/btif/include/btif_bqr.h

/*
 * Copyright 2019 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef BTIF_BQR_H_
#define BTIF_BQR_H_

#include "btm_api_types.h"
#include "common/leaky_bonded_queue.h"
#include "osi/include/osi.h"

namespace bluetooth {
namespace bqr {

// Bluetooth Quality Report (BQR)
//
// It is a feature to start the mechanism in the Bluetooth controller to report
// Bluetooth Quality event to the host and the following options can be enabled:
//   [Quality Monitoring Mode]
//     The controller shall periodically send Bluetooth Quality Report sub-event
//     to the host.
//
//   [Approaching LSTO]
//     Once no packets are received from the connected Bluetooth device for a
//     duration longer than the half of LSTO (Link Supervision TimeOut) value,
//     the controller shall report Approaching LSTO event to the host.
//
//   [A2DP Audio Choppy]
//     When the controller detects the factors which will cause audio choppy,
//     the controller shall report A2DP Audio Choppy event to the host.
//
//   [(e)SCO Voice Choppy]
//     When the controller detects the factors which will cause voice choppy,
//     the controller shall report (e)SCO Voice Choppy event to the host.
//
//   [Root Inflammation]
//     When the controller encounters an error it shall report Root Inflammation
//     event indicating the error code to the host.
//
//   [LMP/LL message trace]
//     The controller sends the LMP/LL message handshaking with the remote
//     device to the host.
//
//   [Bluetooth Multi-profile/Coex scheduling trace]
//     The controller sends its scheduling information on handling the Bluetooth
//     multiple profiles and wireless coexistence in the 2.4 Ghz band to the
//     host.
//
//   [Enable the Controller Debug Information mechanism]
//     After enabling the Controller Debug Information mechanism, the controller
//     just can autonomously report debug logging information via the Controller
//     Debug Info sub-event to the host.
//

// Bit masks for the selected quality event reporting.
static constexpr uint32_t kQualityEventMaskAllOff = 0;
static constexpr uint32_t kQualityEventMaskMonitorMode = 0x00000001;
static constexpr uint32_t kQualityEventMaskApproachLsto = 0x00000002;
static constexpr uint32_t kQualityEventMaskA2dpAudioChoppy = 0x00000004;
static constexpr uint32_t kQualityEventMaskScoVoiceChoppy = 0x00000008;
static constexpr uint32_t kQualityEventMaskRootInflammation = 0x00000010;
static constexpr uint32_t kQualityEventMaskLmpMessageTrace = 0x00010000;
static constexpr uint32_t kQualityEventMaskBtSchedulingTrace = 0x00020000;
static constexpr uint32_t kQualityEventMaskControllerDbgInfo = 0x00040000;
static constexpr uint32_t kQualityEventMaskAll =
    kQualityEventMaskMonitorMode | kQualityEventMaskApproachLsto |
    kQualityEventMaskA2dpAudioChoppy | kQualityEventMaskScoVoiceChoppy |
    kQualityEventMaskRootInflammation | kQualityEventMaskLmpMessageTrace |
    kQualityEventMaskBtSchedulingTrace | kQualityEventMaskControllerDbgInfo;
// Define the minimum time interval (in ms) of quality event reporting for the
// selected quality event(s). Controller Firmware should not report the next
// event within the defined time interval.
static constexpr uint16_t kMinReportIntervalNoLimit = 0;
static constexpr uint16_t kMinReportIntervalMaxMs = 0xFFFF;
// The maximum count of Log Dump related event can be written in the log file.
static constexpr uint16_t kLogDumpEventPerFile = 0x00FF;
// Total length of all parameters of the link Quality related event except
// Vendor Specific Parameters.
static constexpr uint8_t kLinkQualityParamTotalLen = 48;
// Total length of all parameters of the ROOT_INFLAMMATION event except Vendor
// Specific Parameters.
static constexpr uint8_t kRootInflammationParamTotalLen = 3;
// Total length of all parameters of the Log Dump related event except Vendor
// Specific Parameters.
static constexpr uint8_t kLogDumpParamTotalLen = 3;
// Warning criteria of the RSSI value.
static constexpr int8_t kCriWarnRssi = -80;
// Warning criteria of the unused AFH channel count.
static constexpr uint8_t kCriWarnUnusedCh = 55;
// The queue size of recording the BQR events.
static constexpr uint8_t kBqrEventQueueSize = 25;
// The Property of BQR event mask configuration.
static constexpr const char* kpPropertyEventMask =
    "persist.bluetooth.bqr.event_mask";
// The Property of BQR minimum report interval configuration.
static constexpr const char* kpPropertyMinReportIntervalMs =
    "persist.bluetooth.bqr.min_interval_ms";
// Path of the LMP/LL message trace log file.
static constexpr const char* kpLmpLlMessageTraceLogPath =
    "/data/misc/bluetooth/logs/lmp_ll_message_trace.log";
// Path of the last LMP/LL message trace log file.
static constexpr const char* kpLmpLlMessageTraceLastLogPath =
    "/data/misc/bluetooth/logs/lmp_ll_message_trace.log.last";
// Path of the Bluetooth Multi-profile/Coex scheduling trace log file.
static constexpr const char* kpBtSchedulingTraceLogPath =
    "/data/misc/bluetooth/logs/bt_scheduling_trace.log";
// Path of the last Bluetooth Multi-profile/Coex scheduling trace log file.
static constexpr const char* kpBtSchedulingTraceLastLogPath =
    "/data/misc/bluetooth/logs/bt_scheduling_trace.log.last";

// File Descriptor of LMP/LL message trace log
static int LmpLlMessageTraceLogFd = INVALID_FD;
// File Descriptor of Bluetooth Multi-profile/Coex scheduling trace log
static int BtSchedulingTraceLogFd = INVALID_FD;
// Counter of LMP/LL message trace
static uint16_t LmpLlMessageTraceCounter = 0;
// Counter of Bluetooth Multi-profile/Coex scheduling trace
static uint16_t BtSchedulingTraceCounter = 0;

// Action definition
//
// Action to Add, Delete or Clear the reporting of quality event(s).
// Delete will clear specific quality event(s) reporting. Clear will clear all
// quality events reporting.
enum BqrReportAction : uint8_t {
  REPORT_ACTION_ADD = 0x00,
  REPORT_ACTION_DELETE = 0x01,
  REPORT_ACTION_CLEAR = 0x02
};

// Report ID definition
enum BqrQualityReportId : uint8_t {
  QUALITY_REPORT_ID_MONITOR_MODE = 0x01,
  QUALITY_REPORT_ID_APPROACH_LSTO = 0x02,
  QUALITY_REPORT_ID_A2DP_AUDIO_CHOPPY = 0x03,
  QUALITY_REPORT_ID_SCO_VOICE_CHOPPY = 0x04,
  QUALITY_REPORT_ID_ROOT_INFLAMMATION = 0x05,
  QUALITY_REPORT_ID_LMP_LL_MESSAGE_TRACE = 0x11,
  QUALITY_REPORT_ID_BT_SCHEDULING_TRACE = 0x12,
  QUALITY_REPORT_ID_CONTROLLER_DBG_INFO = 0x13
};

// Packet Type definition
enum BqrPacketType : uint8_t {
  PACKET_TYPE_ID = 0x01,
  PACKET_TYPE_NULL,
  PACKET_TYPE_POLL,
  PACKET_TYPE_FHS,
  PACKET_TYPE_HV1,
  PACKET_TYPE_HV2,
  PACKET_TYPE_HV3,
  PACKET_TYPE_DV,
  PACKET_TYPE_EV3,
  PACKET_TYPE_EV4,
  PACKET_TYPE_EV5,
  PACKET_TYPE_2EV3,
  PACKET_TYPE_2EV5,
  PACKET_TYPE_3EV3,
  PACKET_TYPE_3EV5,
  PACKET_TYPE_DM1,
  PACKET_TYPE_DH1,
  PACKET_TYPE_DM3,
  PACKET_TYPE_DH3,
  PACKET_TYPE_DM5,
  PACKET_TYPE_DH5,
  PACKET_TYPE_AUX1,
  PACKET_TYPE_2DH1,
  PACKET_TYPE_2DH3,
  PACKET_TYPE_2DH5,
  PACKET_TYPE_3DH1,
  PACKET_TYPE_3DH3,
  PACKET_TYPE_3DH5
};

// Configuration Parameters
typedef struct {
  BqrReportAction report_action;
  uint32_t quality_event_mask;
  uint16_t minimum_report_interval_ms;
} BqrConfiguration;

// Link quality related BQR event
typedef struct {
  // Quality report ID.
  uint8_t quality_report_id;
  // Packet type of the connection.
  uint8_t packet_types;
  // Connection handle of the connection.
  uint16_t connection_handle;
  // Performing Role for the connection.
  uint8_t connection_role;
  // Current Transmit Power Level for the connection. This value is the same as
  // the controller's response to the HCI_Read_Transmit_Power_Level HCI command.
  int8_t tx_power_level;
  // Received Signal Strength Indication (RSSI) value for the connection. This
  // value is an absolute receiver signal strength value.
  int8_t rssi;
  // Signal-to-Noise Ratio (SNR) value for the connection. It is the average
  // SNR of all the channels used by the link currently.
  uint8_t snr;
  // Indicates the number of unused channels in AFH_channel_map.
  uint8_t unused_afh_channel_count;
  // Indicates the number of the channels which are interfered and quality is
  // bad but are still selected for AFH.
  uint8_t afh_select_unideal_channel_count;
  // Current Link Supervision Timeout Setting.
  // Unit: N * 0.3125 ms (1 Bluetooth Clock)
  uint16_t lsto;
  // Piconet Clock for the specified Connection_Handle. This value is the same
  // as the controller's response to HCI_Read_Clock HCI command with the
  // parameter "Which_Clock" of 0x01 (Piconet Clock).
  // Unit: N * 0.3125 ms (1 Bluetooth Clock)
  uint32_t connection_piconet_clock;
  // The count of retransmission.
  uint32_t retransmission_count;
  // The count of no RX.
  uint32_t no_rx_count;
  // The count of NAK (Negative Acknowledge).
  uint32_t nak_count;
  // Timestamp of last TX ACK.
  // Unit: N * 0.3125 ms (1 Bluetooth Clock)
  uint32_t last_tx_ack_timestamp;
  // The count of Flow-off (STOP).
  uint32_t flow_off_count;
  // Timestamp of last Flow-on (GO).
  // Unit: N * 0.3125 ms (1 Bluetooth Clock)
  uint32_t last_flow_on_timestamp;
  // Buffer overflow count (how many bytes of TX data are dropped) since the
  // last event.
  uint32_t buffer_overflow_bytes;
  // Buffer underflow count (in byte).
  uint32_t buffer_underflow_bytes;
  // For the controller vendor to obtain more vendor specific parameters.
  uint8_t* vendor_specific_parameter;
} BqrLinkQualityEvent;

// Log dump related BQR event
typedef struct {
  // Quality report ID.
  uint8_t quality_report_id;
  // Connection handle of the connection.
  uint16_t connection_handle;
  // For the controller vendor to obtain more vendor specific parameters.
  uint8_t* vendor_specific_parameter;
} BqrLogDumpEvent;

// BQR sub-event of Vendor Specific Event
class BqrVseSubEvt {
 public:
  // Parse the Link Quality related BQR event.
  //
  // @param length Total length of all parameters contained in the sub-event.
  // @param p_param_buf A pointer to the parameters contained in the sub-event.
  void ParseBqrLinkQualityEvt(uint8_t length, uint8_t* p_param_buf);
  // Write the LMP/LL message trace to the log file.
  //
  // @param fd The File Descriptor of the log file.
  // @param length Total length of all parameters contained in the sub-event.
  // @param p_param_buf A pointer to the parameters contained in the sub-event.
  void WriteLmpLlTraceLogFile(int fd, uint8_t length, uint8_t* p_param_buf);
  // Write the Bluetooth Multi-profile/Coex scheduling trace to the log file.
  //
  // @param fd The File Descriptor of the log file.
  // @param length Total length of all parameters contained in the sub-event.
  // @param p_param_buf A pointer to the parameters contained in the sub-event.
  void WriteBtSchedulingTraceLogFile(int fd, uint8_t length,
                                     uint8_t* p_param_buf);
  // Get a string representation of the Bluetooth Quality event.
  //
  // @return a string representation of the Bluetooth Quality event.
  std::string ToString() const;

  friend std::ostream& operator<<(std::ostream& os, const BqrVseSubEvt& a) {
    return os << a.ToString();
  }

  virtual ~BqrVseSubEvt() = default;
  // Link Quality related BQR event
  BqrLinkQualityEvent bqr_link_quality_event_ = {};
  // Log Dump related BQR event
  BqrLogDumpEvent bqr_log_dump_event_ = {};
  // Local wall clock timestamp of receiving BQR VSE sub-event
  std::tm tm_timestamp_ = {};
};

// Get a string representation of the Quality Report ID.
//
// @param quality_report_id The quality report ID to convert.
// @return a string representation of the Quality Report ID.
std::string QualityReportIdToString(uint8_t quality_report_id);

// Get a string representation of the Packet Type.
//
// @param packet_type The packet type to convert.
// @return a string representation of the Packet Type.
std::string PacketTypeToString(uint8_t packet_type);

// Enable/Disable Bluetooth Quality Report mechanism.
//
// Which Quality event will be enabled is according to the setting of the
// property "persist.bluetooth.bqr.event_mask".
// And the minimum time interval of quality event reporting depends on the
// setting of property "persist.bluetooth.bqr.min_interval_ms".
//
// @param is_enable True/False to enable/disable Bluetooth Quality Report
//   mechanism in the Bluetooth controller.
void EnableBtQualityReport(bool is_enable);

// Configure Bluetooth Quality Report setting to the Bluetooth controller.
//
// @param bqr_config The struct of configuration parameters.
void ConfigureBqr(const BqrConfiguration& bqr_config);

// Callback invoked on completion of vendor specific Bluetooth Quality Report
// command.
//
// @param p_vsc_cmpl_params A pointer to the parameters contained in the vendor
//   specific command complete event.
void BqrVscCompleteCallback(tBTM_VSC_CMPL* p_vsc_cmpl_params);

// Invoked on completion of Bluetooth Quality Report configuration. Then it will
// Register/Unregister for receiving VSE - Bluetooth Quality Report sub-event.
//
// @param current_evt_mask Indicates current quality event bit mask setting in
//   the Bluetooth controller.
void ConfigureBqrCmpl(uint32_t current_evt_mask);

// Categorize the incoming Bluetooth Quality Report.
//
// @param length Lengths of the quality report sent from the Bluetooth
//   controller.
// @param p_bqr_event A pointer to the BQR VSE sub-event which is sent from the
//   Bluetooth controller.
void CategorizeBqrEvent(uint8_t length, uint8_t* p_bqr_event);

// Record a new incoming Link Quality related BQR event in quality event queue.
//
// @param length Lengths of the Link Quality related BQR event.
// @param p_link_quality_event A pointer to the Link Quality related BQR event.
void AddLinkQualityEventToQueue(uint8_t length, uint8_t* p_link_quality_event);

// Dump the LMP/LL message handshaking with the remote device to a log file.
//
// @param length Lengths of the LMP/LL message trace event.
// @param p_lmp_ll_message_event A pointer to the LMP/LL message trace event.
void DumpLmpLlMessage(uint8_t length, uint8_t* p_lmp_ll_message_event);

// Open the LMP/LL message trace log file.
//
// @return a file descriptor of the LMP/LL message trace log file.
int OpenLmpLlTraceLogFile();

// Dump the Bluetooth Multi-profile/Coex scheduling information to a log file.
//
// @param length Lengths of the Bluetooth Multi-profile/Coex scheduling trace
//   event.
// @param p_bt_scheduling_event A pointer to the Bluetooth Multi-profile/Coex
//   scheduling trace event.
void DumpBtScheduling(uint8_t length, uint8_t* p_bt_scheduling_event);

// Open the Bluetooth Multi-profile/Coex scheduling trace log file.
//
// @return a file descriptor of the Bluetooth Multi-profile/Coex scheduling
//   trace log file.
int OpenBtSchedulingTraceLogFile();

// Dump Bluetooth Quality Report information.
//
// @param fd The file descriptor to use for dumping information.
void DebugDump(int fd);

}  // namespace bqr
}  // namespace bluetooth

#endif  // BTIF_BQR_H_