#
# Copyright (C) 2017 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

TARGET_USERIMAGES_USE_F2FS := true

LOCAL_PATH := device/google/crosshatch

# define hardware platform
PRODUCT_PLATFORM := sdm845

# Enable updating of APEXes
$(call inherit-product, $(SRC_TARGET_DIR)/product/updatable_apex.mk)

include device/google/crosshatch/device.mk

# Audio fluence, ns, aec property, voice volume steps
PRODUCT_PROPERTY_OVERRIDES += \
    ro.qc.sdk.audio.fluencetype=fluencepro \
    persist.audio.fluence.voicecall=true \
    persist.audio.fluence.speaker=true \
    persist.audio.fluence.voicecomm=true \
    persist.audio.fluence.voicerec=false \
    ro.config.vc_call_vol_steps=7

# Bug 77867216
PRODUCT_PROPERTY_OVERRIDES += audio.adm.buffering.ms=3
PRODUCT_PROPERTY_OVERRIDES += vendor.audio.adm.buffering.ms=3
PRODUCT_PROPERTY_OVERRIDES += audio_hal.period_multiplier=2
PRODUCT_PROPERTY_OVERRIDES += af.fast_track_multiplier=1

# Enable HW Codec 2.0 as default service
# Set all codec components are available with their normal ranks
# Set OMX components's default rank large than Codec 2.0 HW components's default rank (0x100)
PRODUCT_PROPERTY_OVERRIDES += debug.stagefright.ccodec=4
PRODUCT_PROPERTY_OVERRIDES += debug.stagefright.omx_default_rank=512

# Pixelstats broken mic detection
PRODUCT_PROPERTY_OVERRIDES += vendor.audio.mic_break=true

# Setting vendor SPL
VENDOR_SECURITY_PATCH = $(PLATFORM_SECURITY_PATCH)

# Set boot SPL
BOOT_SECURITY_PATCH = $(PLATFORM_SECURITY_PATCH)

# MIDI feature
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.software.midi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.midi.xml

# Audio low latency feature
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.audio.low_latency.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.low_latency.xml

# Pro audio feature
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.audio.pro.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.pro.xml

# Enable AAudio MMAP/NOIRQ data path.
# 1 is AAUDIO_POLICY_NEVER  means only use Legacy path.
# 2 is AAUDIO_POLICY_AUTO   means try MMAP then fallback to Legacy path.
# 3 is AAUDIO_POLICY_ALWAYS means only use MMAP path.
PRODUCT_PROPERTY_OVERRIDES += aaudio.mmap_policy=2
# 1 is AAUDIO_POLICY_NEVER  means only use SHARED mode
# 2 is AAUDIO_POLICY_AUTO   means try EXCLUSIVE then fallback to SHARED mode.
# 3 is AAUDIO_POLICY_ALWAYS means only use EXCLUSIVE mode.
PRODUCT_PROPERTY_OVERRIDES += aaudio.mmap_exclusive_policy=2

# Increase the apparent size of a hardware burst from 1 msec to 2 msec.
# A "burst" is the number of frames processed at one time.
# That is an increase from 48 to 96 frames at 48000 Hz.
# The DSP will still be bursting at 48 frames but AAudio will think the burst is 96 frames.
# A low number, like 48, might increase power consumption or stress the system.
PRODUCT_PROPERTY_OVERRIDES += aaudio.hw_burst_min_usec=2000

# A2DP offload enabled for compilation
AUDIO_FEATURE_ENABLED_A2DP_OFFLOAD := true

# A2DP offload supported
PRODUCT_PROPERTY_OVERRIDES += \
ro.bluetooth.a2dp_offload.supported=true

# A2DP offload disabled (UI toggle property)
PRODUCT_PROPERTY_OVERRIDES += \
persist.bluetooth.a2dp_offload.disabled=false

# A2DP offload DSP supported encoder list
PRODUCT_PROPERTY_OVERRIDES += \
persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac

# Modem loging file
PRODUCT_COPY_FILES += \
    device/google/crosshatch/init.logging.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).logging.rc

# Dumpstate HAL
PRODUCT_PACKAGES += \
    android.hardware.dumpstate@1.0-service.crosshatch

# whitelisted app
PRODUCT_COPY_FILES += \
    device/google/crosshatch/qti_whitelist.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/sysconfig/qti_whitelist.xml

PRODUCT_PACKAGES += \
    llkd
#PRODUCT_PROPERTY_OVERRIDES += \
#    ro.khungtask.enable=false
#

# Enable retrofit dynamic partitions for all blueline
# and crosshatch targets
PRODUCT_USE_DYNAMIC_PARTITIONS := true
PRODUCT_RETROFIT_DYNAMIC_PARTITIONS := true
PRODUCT_PACKAGES += \
    android.hardware.boot@1.0-impl.recovery \
    bootctrl.sdm845 \
    bootctrl.sdm845.recovery \
    check_dynamic_partitions \

AB_OTA_POSTINSTALL_CONFIG += \
    RUN_POSTINSTALL_product=true \
    POSTINSTALL_PATH_product=bin/check_dynamic_partitions \
    FILESYSTEM_TYPE_product=ext4 \
    POSTINSTALL_OPTIONAL_product=false \

# Set thermal warm reset
PRODUCT_PRODUCT_PROPERTIES += \
    ro.thermal_warmreset = true \