/* * Copyright (C) 2013 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef ANDROID_SERVERS_CAMERA3_STREAM_INTERFACE_H #define ANDROID_SERVERS_CAMERA3_STREAM_INTERFACE_H #include #include #include "Camera3StreamBufferListener.h" #include "Camera3StreamBufferFreedListener.h" namespace android { namespace camera3 { typedef enum camera_buffer_status { CAMERA_BUFFER_STATUS_OK = 0, CAMERA_BUFFER_STATUS_ERROR = 1 } camera_buffer_status_t; typedef enum camera_stream_type { CAMERA_STREAM_OUTPUT = 0, CAMERA_STREAM_INPUT = 1, CAMERA_NUM_STREAM_TYPES } camera_stream_type_t; typedef enum camera_stream_rotation { /* No rotation */ CAMERA_STREAM_ROTATION_0 = 0, /* Rotate by 90 degree counterclockwise */ CAMERA_STREAM_ROTATION_90 = 1, /* Rotate by 180 degree counterclockwise */ CAMERA_STREAM_ROTATION_180 = 2, /* Rotate by 270 degree counterclockwise */ CAMERA_STREAM_ROTATION_270 = 3 } camera_stream_rotation_t; typedef struct camera_stream { camera_stream_type_t stream_type; uint32_t width; uint32_t height; int format; uint32_t usage; uint32_t max_buffers; android_dataspace_t data_space; camera_stream_rotation_t rotation; const char* physical_camera_id; std::unordered_set sensor_pixel_modes_used; } camera_stream_t; typedef struct camera_stream_buffer { camera_stream_t *stream; buffer_handle_t *buffer; camera_buffer_status_t status; int acquire_fence; int release_fence; } camera_stream_buffer_t; struct Size { uint32_t width; uint32_t height; explicit Size(uint32_t w = 0, uint32_t h = 0) : width(w), height(h){} }; enum { /** * This stream set ID indicates that the set ID is invalid, and this stream doesn't intend to * share buffers with any other stream. It is illegal to register this kind of stream to * Camera3BufferManager. */ CAMERA3_STREAM_SET_ID_INVALID = -1, /** * Invalid output stream ID. */ CAMERA3_STREAM_ID_INVALID = -1, }; class StatusTracker; // OutputStreamInfo describes the property of a camera stream. class OutputStreamInfo { public: int width; int height; int format; android_dataspace dataSpace; uint64_t consumerUsage; bool finalized = false; bool supportsOffline = false; std::unordered_set sensorPixelModesUsed; OutputStreamInfo() : width(-1), height(-1), format(-1), dataSpace(HAL_DATASPACE_UNKNOWN), consumerUsage(0) {} OutputStreamInfo(int _width, int _height, int _format, android_dataspace _dataSpace, uint64_t _consumerUsage, const std::unordered_set& _sensorPixelModesUsed) : width(_width), height(_height), format(_format), dataSpace(_dataSpace), consumerUsage(_consumerUsage), sensorPixelModesUsed(_sensorPixelModesUsed) {} }; /** * An interface for managing a single stream of input and/or output data from * the camera device. */ class Camera3StreamInterface : public virtual RefBase { public: enum { ALLOCATE_PIPELINE_MAX = 0, // Allocate max buffers used by a given surface }; /** * Get the stream's ID */ virtual int getId() const = 0; /** * Get the output stream set id. */ virtual int getStreamSetId() const = 0; /** * Is this stream part of a multi-resolution stream set */ virtual bool isMultiResolution() const = 0; /** * Get the HAL stream group id for a multi-resolution stream set */ virtual int getHalStreamGroupId() const = 0; /** * Get the stream's dimensions and format */ virtual uint32_t getWidth() const = 0; virtual uint32_t getHeight() const = 0; virtual int getFormat() const = 0; virtual android_dataspace getDataSpace() const = 0; virtual void setFormatOverride(bool formatOverriden) = 0; virtual bool isFormatOverridden() const = 0; virtual int getOriginalFormat() const = 0; virtual void setDataSpaceOverride(bool dataSpaceOverriden) = 0; virtual bool isDataSpaceOverridden() const = 0; virtual android_dataspace getOriginalDataSpace() const = 0; virtual int getMaxHalBuffers() const = 0; virtual int getMaxTotalBuffers() const = 0; /** * Offline processing */ virtual void setOfflineProcessingSupport(bool support) = 0; virtual bool getOfflineProcessingSupport() const = 0; /** * Get a handle for the stream, without starting stream configuration. */ virtual camera_stream* asHalStream() = 0; /** * Start the stream configuration process. Returns a handle to the stream's * information to be passed into the device's configure_streams call. * * Until finishConfiguration() is called, no other methods on the stream may * be called. The usage and max_buffers fields of camera_stream may be * modified between start/finishConfiguration, but may not be changed after * that. The priv field of camera_stream may be modified at any time after * startConfiguration. * * Returns NULL in case of error starting configuration. */ virtual camera_stream* startConfiguration() = 0; /** * Check if the stream is mid-configuration (start has been called, but not * finish). Used for lazy completion of configuration. */ virtual bool isConfiguring() const = 0; /** * Completes the stream configuration process. During this call, the stream * may call the device's register_stream_buffers() method. The stream * information structure returned by startConfiguration() may no longer be * modified after this call, but can still be read until the destruction of * the stream. * * streamReconfigured: set to true when a stream is being reconfigured. * * Returns: * OK on a successful configuration * NO_INIT in case of a serious error from the HAL device * NO_MEMORY in case of an error registering buffers * INVALID_OPERATION in case connecting to the consumer failed */ virtual status_t finishConfiguration(/*out*/bool* streamReconfigured = nullptr) = 0; /** * Cancels the stream configuration process. This returns the stream to the * initial state, allowing it to be configured again later. * This is done if the HAL rejects the proposed combined stream configuration */ virtual status_t cancelConfiguration() = 0; /** * Determine whether the stream has already become in-use (has received * a valid filled buffer), which determines if a stream can still have * prepareNextBuffer called on it. */ virtual bool isUnpreparable() = 0; /** * Mark the stream as unpreparable. */ virtual void markUnpreparable() = 0; /** * Start stream preparation. May only be called in the CONFIGURED state, * when no valid buffers have yet been returned to this stream. Prepares * up to maxCount buffers, or the maximum number of buffers needed by the * pipeline if maxCount is ALLOCATE_PIPELINE_MAX. * * If no prepartion is necessary, returns OK and does not transition to * PREPARING state. Otherwise, returns NOT_ENOUGH_DATA and transitions * to PREPARING. * * blockRequest specifies whether prepare will block upcoming capture * request. This flag should only be set to false if the caller guarantees * the whole buffer preparation process is done before capture request * comes in. * * Returns: * OK if no more buffers need to be preallocated * NOT_ENOUGH_DATA if calls to prepareNextBuffer are needed to finish * buffer pre-allocation, and transitions to the PREPARING state. * NO_INIT in case of a serious error from the HAL device * INVALID_OPERATION if called when not in CONFIGURED state, or a * valid buffer has already been returned to this stream. */ virtual status_t startPrepare(int maxCount, bool blockRequest) = 0; /** * Check if the request on a stream is blocked by prepare. */ virtual bool isBlockedByPrepare() const = 0; /** * Continue stream buffer preparation by allocating the next * buffer for this stream. May only be called in the PREPARED state. * * Returns OK and transitions to the CONFIGURED state if all buffers * are allocated after the call concludes. Otherwise returns NOT_ENOUGH_DATA. * * Returns: * OK if no more buffers need to be preallocated, and transitions * to the CONFIGURED state. * NOT_ENOUGH_DATA if more calls to prepareNextBuffer are needed to finish * buffer pre-allocation. * NO_INIT in case of a serious error from the HAL device * INVALID_OPERATION if called when not in CONFIGURED state, or a * valid buffer has already been returned to this stream. */ virtual status_t prepareNextBuffer() = 0; /** * Cancel stream preparation early. In case allocation needs to be * stopped, this method transitions the stream back to the CONFIGURED state. * Buffers that have been allocated with prepareNextBuffer remain that way, * but a later use of prepareNextBuffer will require just as many * calls as if the earlier prepare attempt had not existed. * * Returns: * OK if cancellation succeeded, and transitions to the CONFIGURED state * INVALID_OPERATION if not in the PREPARING state * NO_INIT in case of a serious error from the HAL device */ virtual status_t cancelPrepare() = 0; /** * Tear down memory for this stream. This frees all unused gralloc buffers * allocated for this stream, but leaves it ready for operation afterward. * * May only be called in the CONFIGURED state, and keeps the stream in * the CONFIGURED state. * * Returns: * OK if teardown succeeded. * INVALID_OPERATION if not in the CONFIGURED state * NO_INIT in case of a serious error from the HAL device */ virtual status_t tearDown() = 0; /** * Fill in the camera_stream_buffer with the next valid buffer for this * stream, to hand over to the HAL. * * Multiple surfaces could share the same HAL stream, but a request may * be only for a subset of surfaces. In this case, the * Camera3StreamInterface object needs the surface ID information to acquire * buffers for those surfaces. For the case of single surface for a HAL * stream, surface_ids parameter has no effect. * * This method may only be called once finishConfiguration has been called. * For bidirectional streams, this method applies to the output-side * buffers. * */ virtual status_t getBuffer(camera_stream_buffer *buffer, nsecs_t waitBufferTimeout, const std::vector& surface_ids = std::vector()) = 0; struct OutstandingBuffer { camera_stream_buffer* outBuffer; /** * Multiple surfaces could share the same HAL stream, but a request may * be only for a subset of surfaces. In this case, the * Camera3StreamInterface object needs the surface ID information to acquire * buffers for those surfaces. For the case of single surface for a HAL * stream, surface_ids parameter has no effect. */ std::vector surface_ids; }; /** * Similar to getBuffer() except this method fills multiple buffers. */ virtual status_t getBuffers(std::vector* buffers, nsecs_t waitBufferTimeout) = 0; /** * Return a buffer to the stream after use by the HAL. * * Multiple surfaces could share the same HAL stream, but a request may * be only for a subset of surfaces. In this case, the * Camera3StreamInterface object needs the surface ID information to attach * buffers for those surfaces. For the case of single surface for a HAL * stream, surface_ids parameter has no effect. * * This method may only be called for buffers provided by getBuffer(). * For bidirectional streams, this method applies to the output-side buffers */ virtual status_t returnBuffer(const camera_stream_buffer &buffer, nsecs_t timestamp, bool timestampIncreasing = true, const std::vector& surface_ids = std::vector(), uint64_t frameNumber = 0) = 0; /** * Fill in the camera_stream_buffer with the next valid buffer for this * stream, to hand over to the HAL. * * This method may only be called once finishConfiguration has been called. * For bidirectional streams, this method applies to the input-side * buffers. * * Normally this call will block until the handed out buffer count is less than the stream * max buffer count; if respectHalLimit is set to false, this is ignored. */ virtual status_t getInputBuffer(camera_stream_buffer *buffer, Size *size, bool respectHalLimit = true) = 0; /** * Return a buffer to the stream after use by the HAL. * * This method may only be called for buffers provided by getBuffer(). * For bidirectional streams, this method applies to the input-side buffers */ virtual status_t returnInputBuffer(const camera_stream_buffer &buffer) = 0; /** * Get the buffer producer of the input buffer queue. * * This method only applies to input streams. */ virtual status_t getInputBufferProducer(sp *producer) = 0; /** * Whether any of the stream's buffers are currently in use by the HAL, * including buffers that have been returned but not yet had their * release fence signaled. */ virtual bool hasOutstandingBuffers() const = 0; /** * Get number of buffers currently handed out to HAL */ virtual size_t getOutstandingBuffersCount() const = 0; enum { TIMEOUT_NEVER = -1 }; /** * Set the state tracker to use for signaling idle transitions. */ virtual status_t setStatusTracker(sp statusTracker) = 0; /** * Disconnect stream from its non-HAL endpoint. After this, * start/finishConfiguration must be called before the stream can be used * again. This cannot be called if the stream has outstanding dequeued * buffers. */ virtual status_t disconnect() = 0; /** * Return if the buffer queue of the stream is abandoned. */ virtual bool isAbandoned() const = 0; /** * Debug dump of the stream's state. */ virtual void dump(int fd, const Vector &args) const = 0; virtual void addBufferListener( wp listener) = 0; virtual void removeBufferListener( const sp& listener) = 0; /** * Setting listner will remove previous listener (if exists) * Only allow set listener during stream configuration because stream is guaranteed to be IDLE * at this state, so setBufferFreedListener won't collide with onBufferFreed callbacks. * Client is responsible to keep the listener object alive throughout the lifecycle of this * Camera3Stream. */ virtual void setBufferFreedListener(wp listener) = 0; /** * Notify buffer stream listeners about incoming request with particular frame number. */ virtual void fireBufferRequestForFrameNumber(uint64_t frameNumber, const CameraMetadata& settings) = 0; }; } // namespace camera3 } // namespace android #endif