/****************************************************************************** * * Copyright 2001-2012 Broadcom Corporation * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ /****************************************************************************** * * this file contains the PAN API definitions * ******************************************************************************/ #ifndef PAN_API_H #define PAN_API_H #include "bnep_api.h" /***************************************************************************** * Constants ****************************************************************************/ /* Define the minimum offset needed in a GKI buffer for * sending PAN packets. Note, we are currently not sending * extension headers, but may in the future, so allow * space for them */ #define PAN_MINIMUM_OFFSET BNEP_MINIMUM_OFFSET /* * The handle is passed from BNEP to PAN. The same handle is used * between PAN and application as well */ #define PAN_INVALID_HANDLE BNEP_INVALID_HANDLE /* Bit map for PAN roles */ #define PAN_ROLE_CLIENT 0x01 /* PANU role */ #define PAN_ROLE_NAP_SERVER 0x04 /* NAP role */ /* Bitmap to indicate the usage of the Data */ #define PAN_DATA_TO_HOST 0x01 #define PAN_DATA_TO_LAN 0x02 /***************************************************************************** * Type Definitions ****************************************************************************/ /* Define the result codes from PAN */ enum { PAN_SUCCESS, /* Success */ PAN_DISCONNECTED = BNEP_CONN_DISCONNECTED, /* Connection terminated */ PAN_CONN_FAILED = BNEP_CONN_FAILED, /* Connection failed */ PAN_NO_RESOURCES = BNEP_NO_RESOURCES, /* No resources */ PAN_MTU_EXCEDED = BNEP_MTU_EXCEDED, /* Attempt to write long data */ PAN_INVALID_OFFSET = BNEP_INVALID_OFFSET, /* Insufficient offset in GKI buffer */ PAN_CONN_FAILED_CFG = BNEP_CONN_FAILED_CFG, /* Connection failed cos of config */ PAN_INVALID_SRC_ROLE = BNEP_CONN_FAILED_SRC_UUID, /* Connection failed wrong source UUID */ PAN_INVALID_DST_ROLE = BNEP_CONN_FAILED_DST_UUID, /* Connection failed wrong destination UUID */ PAN_CONN_FAILED_UUID_SIZE = BNEP_CONN_FAILED_UUID_SIZE, /* Connection failed wrong size UUID */ PAN_Q_SIZE_EXCEEDED = BNEP_Q_SIZE_EXCEEDED, /* Too many buffers to dest */ PAN_TOO_MANY_FILTERS = BNEP_TOO_MANY_FILTERS, /* Too many local filters specified */ PAN_SET_FILTER_FAIL = BNEP_SET_FILTER_FAIL, /* Set Filter failed */ PAN_WRONG_HANDLE = BNEP_WRONG_HANDLE, /* Wrong handle for the connection */ PAN_WRONG_STATE = BNEP_WRONG_STATE, /* Connection is in wrong state */ PAN_SECURITY_FAIL = BNEP_SECURITY_FAIL, /* Failed because of security */ PAN_IGNORE_CMD = BNEP_IGNORE_CMD, /* To ignore the rcvd command */ PAN_TX_FLOW_ON = BNEP_TX_FLOW_ON, /* tx data flow enabled */ PAN_TX_FLOW_OFF = BNEP_TX_FLOW_OFF, /* tx data flow disabled */ PAN_FAILURE /* Failure */ }; typedef uint8_t tPAN_RESULT; /***************************************************************** * Callback Function Prototypes ****************************************************************/ /* This is call back function used to report connection status * to the application. The second parameter true means * to create the bridge and false means to remove it. */ typedef void(tPAN_CONN_STATE_CB)(uint16_t handle, const RawAddress& bd_addr, tPAN_RESULT state, bool is_role_change, uint8_t src_role, uint8_t dst_role); /* This is call back function used to create bridge for the * Connected device. The parameter "state" indicates * whether to create the bridge or remove it. true means * to create the bridge and false means to remove it. */ typedef void(tPAN_BRIDGE_REQ_CB)(const RawAddress& bd_addr, bool state); /* Data received indication callback prototype. Parameters are * Source BD/Ethernet Address * Dest BD/Ethernet address * Protocol * Address of buffer (or data if non-GKI) * Length of data (non-GKI) * ext is flag to indicate whether it has aby extension headers * Flag used to indicate to forward on LAN * false - Use it for internal stack * true - Send it across the ethernet as well */ typedef void(tPAN_DATA_IND_CB)(uint16_t handle, const RawAddress& src, const RawAddress& dst, uint16_t protocol, uint8_t* p_data, uint16_t len, bool ext, bool forward); /* Data buffer received indication callback prototype. Parameters are * Source BD/Ethernet Address * Dest BD/Ethernet address * Protocol * pointer to the data buffer * ext is flag to indicate whether it has aby extension headers * Flag used to indicate to forward on LAN * false - Use it for internal stack * true - Send it across the ethernet as well */ typedef void(tPAN_DATA_BUF_IND_CB)(uint16_t handle, const RawAddress& src, const RawAddress& dst, uint16_t protocol, BT_HDR* p_buf, bool ext, bool forward); /* Flow control callback for TX data. Parameters are * Handle to the connection * Event flow status */ typedef void(tPAN_TX_DATA_FLOW_CB)(uint16_t handle, tPAN_RESULT event); /* Filters received indication callback prototype. Parameters are * Handle to the connection * true if the cb is called for indication * Ignore this if it is indication, otherwise it is the result * for the filter set operation performed by the local * device * Number of protocol filters present * Pointer to the filters start. Filters are present in pairs * of start of the range and end of the range. * They will be present in big endian order. First * two bytes will be starting of the first range and * next two bytes will be ending of the range. */ typedef void(tPAN_FILTER_IND_CB)(uint16_t handle, bool indication, tBNEP_RESULT result, uint16_t num_filters, uint8_t* p_filters); /* Multicast Filters received indication callback prototype. Parameters are * Handle to the connection * true if the cb is called for indication * Ignore this if it is indication, otherwise it is the result * for the filter set operation performed by the local * device * Number of multicast filters present * Pointer to the filters start. Filters are present in pairs * of start of the range and end of the range. * First six bytes will be starting of the first range and * next six bytes will be ending of the range. */ typedef void(tPAN_MFILTER_IND_CB)(uint16_t handle, bool indication, tBNEP_RESULT result, uint16_t num_mfilters, uint8_t* p_mfilters); /* This structure is used to register with PAN profile * It is passed as a parameter to PAN_Register call. */ typedef struct { tPAN_CONN_STATE_CB* pan_conn_state_cb; /* Connection state callback */ tPAN_BRIDGE_REQ_CB* pan_bridge_req_cb; /* Bridge request callback */ tPAN_DATA_IND_CB* pan_data_ind_cb; /* Data indication callback */ tPAN_DATA_BUF_IND_CB* pan_data_buf_ind_cb; /* Data buffer indication callback */ tPAN_FILTER_IND_CB* pan_pfilt_ind_cb; /* protocol filter indication callback */ tPAN_MFILTER_IND_CB* pan_mfilt_ind_cb; /* multicast filter indication callback */ tPAN_TX_DATA_FLOW_CB* pan_tx_data_flow_cb; /* data flow callback */ char* user_service_name; /* Service name for PANU role */ char* gn_service_name; /* Service name for GN role */ char* nap_service_name; /* Service name for NAP role */ } tPAN_REGISTER; /***************************************************************************** * External Function Declarations ****************************************************************************/ /******************************************************************************* * * Function PAN_Register * * Description This function is called by the application to register * its callbacks with PAN profile. The application then * should set the PAN role explicitly. * * Parameters: p_register - contains all callback function pointers * * * Returns none * ******************************************************************************/ extern void PAN_Register(tPAN_REGISTER* p_register); /******************************************************************************* * * Function PAN_Deregister * * Description This function is called by the application to de-register * its callbacks with PAN profile. This will make the PAN to * become inactive. This will deregister PAN services from SDP * and close all active connections * * Returns none * ******************************************************************************/ extern void PAN_Deregister(void); /******************************************************************************* * * Function PAN_SetRole * * Description This function is called by the application to set the PAN * profile role. This should be called after PAN_Register. * This can be called any time to change the PAN role * * Parameters: role - is bit map of roles to be active * PAN_ROLE_CLIENT is for PANU role * PAN_ROLE_NAP_SERVER is for NAP role * sec_mask - Security mask for different roles * It is array of uint8_t. The bytes * represent the security for roles PANU, * GN and NAP in order * * p_user_name - Service name for PANU role * p_nap_name - Service name for NAP role * Can be NULL if user wants it to be default * * Returns PAN_SUCCESS - if the role is set successfully * PAN_FAILURE - if the role is not valid * ******************************************************************************/ extern tPAN_RESULT PAN_SetRole(uint8_t role, const char* p_user_name, const char* p_nap_name); /******************************************************************************* * * Function PAN_Connect * * Description This function is called by the application to initiate a * connection to the remote device * * Parameters: rem_bda - BD Addr of the remote device * src_role - Role of the local device for the connection * dst_role - Role of the remote device for the connection * PAN_ROLE_CLIENT is for PANU role * PAN_ROLE_NAP_SERVER is for NAP role * *handle - Pointer for returning Handle to the connection * * Returns PAN_SUCCESS - if the connection is initiated successfully * PAN_NO_RESOURCES - resources are not sufficent * PAN_FAILURE - if the connection cannot be initiated * this can be because of the combination of * src and dst roles may not be valid or * allowed at that point of time * ******************************************************************************/ extern tPAN_RESULT PAN_Connect(const RawAddress& rem_bda, uint8_t src_role, uint8_t dst_role, uint16_t* handle); /******************************************************************************* * * Function PAN_Disconnect * * Description This is used to disconnect the connection * * Parameters: handle - handle for the connection * * Returns PAN_SUCCESS - if the connection is closed successfully * PAN_FAILURE - if the connection is not found or * there is an error in disconnecting * ******************************************************************************/ extern tPAN_RESULT PAN_Disconnect(uint16_t handle); /******************************************************************************* * * Function PAN_Write * * Description This sends data over the PAN connections. If this is called * on GN or NAP side and the packet is multicast or broadcast * it will be sent on all the links. Otherwise the correct link * is found based on the destination address and forwarded on * it. If the return value is not PAN_SUCCESS the application * should take care of releasing the message buffer * * Parameters: dst - MAC or BD Addr of the destination device * src - MAC or BD Addr of the source who sent this packet * protocol - protocol of the ethernet packet like IP or ARP * p_data - pointer to the data * len - length of the data * ext - to indicate that extension headers present * * Returns PAN_SUCCESS - if the data is sent successfully * PAN_FAILURE - if the connection is not found or * there is an error in sending data * ******************************************************************************/ extern tPAN_RESULT PAN_Write(uint16_t handle, const RawAddress& dst, const RawAddress& src, uint16_t protocol, uint8_t* p_data, uint16_t len, bool ext); /******************************************************************************* * * Function PAN_WriteBuf * * Description This sends data over the PAN connections. If this is called * on GN or NAP side and the packet is multicast or broadcast * it will be sent on all the links. Otherwise the correct link * is found based on the destination address and forwarded on * it. If the return value is not PAN_SUCCESS the application * should take care of releasing the message buffer * * Parameters: dst - MAC or BD Addr of the destination device * src - MAC or BD Addr of the source who sent this packet * protocol - protocol of the ethernet packet like IP or ARP * p_buf - pointer to the data buffer * ext - to indicate that extension headers present * * Returns PAN_SUCCESS - if the data is sent successfully * PAN_FAILURE - if the connection is not found or * there is an error in sending data * ******************************************************************************/ extern tPAN_RESULT PAN_WriteBuf(uint16_t handle, const RawAddress& dst, const RawAddress& src, uint16_t protocol, BT_HDR* p_buf, bool ext); /******************************************************************************* * * Function PAN_SetProtocolFilters * * Description This function is used to set protocol filters on the peer * * Parameters: handle - handle for the connection * num_filters - number of protocol filter ranges * start - array of starting protocol numbers * end - array of ending protocol numbers * * * Returns PAN_SUCCESS if protocol filters are set successfully * PAN_FAILURE if connection not found or error in setting * ******************************************************************************/ extern tPAN_RESULT PAN_SetProtocolFilters(uint16_t handle, uint16_t num_filters, uint16_t* p_start_array, uint16_t* p_end_array); /******************************************************************************* * * Function PAN_SetMulticastFilters * * Description This function is used to set multicast filters on the peer * * Parameters: handle - handle for the connection * num_filters - number of multicast filter ranges * p_start_array - Pointer to sequence of beginings of all * multicast address ranges * p_end_array - Pointer to sequence of ends of all * multicast address ranges * * * Returns PAN_SUCCESS if multicast filters are set successfully * PAN_FAILURE if connection not found or error in setting * ******************************************************************************/ extern tBNEP_RESULT PAN_SetMulticastFilters(uint16_t handle, uint16_t num_mcast_filters, uint8_t* p_start_array, uint8_t* p_end_array); /******************************************************************************* * * Function PAN_SetTraceLevel * * Description This function sets the trace level for PAN. If called with * a value of 0xFF, it simply reads the current trace level. * * Returns the new (current) trace level * ******************************************************************************/ extern uint8_t PAN_SetTraceLevel(uint8_t new_level); /******************************************************************************* * * Function PAN_Init * * Description This function initializes the PAN unit. It should be called * before accessing any other APIs to initialize the control * block. * * Returns void * ******************************************************************************/ extern void PAN_Init(void); #endif /* PAN_API_H */