v811_spc009/bionic/docs/libc_assembler.md

Validing libc Assembler Routines

This document describes how to verify incoming assembler libc routines.

Quick Start

• First, benchmark the previous version of the routine.
• Update the routine, run the bionic unit tests to verify the routine doesn't have any bugs. See the Testing section for details about how to verify that the routine is being properly tested.
• Rerun the benchmarks using the updated image that uses the code for the new routine. See the Performance section for details about benchmarking.
• Verify that unwind information for new routine looks correct. See the Unwind Info section for details about how to verify this.

When benchmarking, it's best to verify on the latest Pixel device supported. Make sure that you benchmark both the big and little cores to verify that there is no major difference in performance on each.

Benchmark 64 bit memcmp:

/data/benchmarktest64/bionic-benchmarks/bionic-benchmarks --bionic_xml=string.xml --benchmark_filter=memcmp

Benchmark 32 bit memcmp:

/data/benchmarktest/bionic-benchmarks/bionic-benchmarks --bionic_xml=string.xml --benchmark_filter=memcmp

Locking to a specific cpu:

/data/benchmarktest/bionic-benchmarks/bionic-benchmarks --bionic_cpu=2 --bionic_xml=string.xml --benchmark_filter=memcmp

Performance

The bionic benchmarks are used to verify the performance of changes to routines. For most routines, there should already be benchmarks available.

Building

The bionic benchmarks are not built by default, they must be built separately and pushed on to the device. The commands below show how to do this.

mmma -j bionic/benchmarks
adb sync data

Running

There are two bionic benchmarks executables:

/data/benchmarktest64/bionic-benchmarks/bionic-benchmarks

This is for 64 bit libc routines.

/data/benchmarktest/bionic-benchmarks/bionic-benchmarks

This is for 32 bit libc routines.

Here is an example of how the benchmark should be executed. For this command to work, you need to change directory to one of the above directories.

bionic-benchmarks --bionic_xml=string.xml --benchmark_filter=memcmp

The last argument is the name of the one function that you want to benchmark.

Almost all routines are already defined in the string.xml file in bionic/benchmarks/suites. Look at the examples in that file to see how to add a benchmark for a function that doesn't already exist.

It can take a long time to run these tests since it attempts to test a large number of sizes and alignments.

Results

Bionic benchmarks is based on the Google Benchmarks library. An example of the output looks like this:

Run on (8 X 1844 MHz CPU s)
CPU Caches:
  L1 Data 32K (x8)
  L1 Instruction 32K (x8)
  L2 Unified 512K (x2)
***WARNING*** CPU scaling is enabled, the benchmark real time measurements may be noisy and will incur extra overhead.
-------------------------------------------------------------------------------------------
Benchmark                                                    Time           CPU Iterations
-------------------------------------------------------------------------------------------
BM_string_memcmp/1/0/0                                       6 ns          6 ns  120776418   164.641MB/s
BM_string_memcmp/1/1/1                                       6 ns          6 ns  120856788   164.651MB/s

The smaller the time, the better the performance.

Caveats

When running the benchmarks, CPU scaling is not normally enabled. This means that if the device does not get up to the maximum cpu frequency, the results can vary wildly. It's possible to lock the cpu to the maximum frequency, but is beyond the scope of this document. However, most of the benchmarks max out the cpu very quickly on Pixel devices, and don't affect the results.

Another potential issue is that the device can overheat when running the benchmarks. To avoid this, you can run the device in a cool environment, or choose a device that is less likely to overheat. To detect these kind of issues, you can run a subset of the tests again. At the very least, it's always a good idea to rerun the suite a couple of times to verify that there isn't a high variation in the numbers.

If you want to verify a single benchmark result, you can run a single test using a command like this:

bionic-benchmarks --bionic_xml=string.xml --benchmark_filter=BM_string_memcmp/1/1/0

Where the argument to the filter argument is the name of the benchmark from the output. Sometimes this filter can still match multiple benchmarks, to guarantee that you only run the single benchmark, you can execute the benchmark like so:

bionic-benchmarks --bionic_xml=string.xml --benchmark_filter=BM_string_memcmp/1/1/0$

NOTE: It is assumed that these commands are executed in adb as the shell user on device. If you are trying to run this using adb directly from a host machine, you might need to escape the special shell characters such as $.

Testing

Run the bionic tests to verify that the new routines are valid. However, you should verify that there is coverage of the new routines. This is especially important if this is the first time a routine is assembler.

Caveats

When verifying an assembler routine that operates on buffer data (such as memcpy/strcpy), it's important to verify these corner cases:

• Verify the routine does not read past the end of the buffers. Many assembler routines optimize by reading multipe bytes at a time and can read past the end. This kind of bug results in an infrequent and difficult to diagnosis crash.
• Verify the routine handles unaligned buffers properly. Usually, a failure can result in an unaligned exception.
• Verify the routine handles different sized buffers.

If there are not sufficient tests for a new routine, there are a set of helper functions that can be used to verify the above corner cases. See the header bionic/tests/buffer_tests.h for these routines and look at bionic/tests/string_test.cpp for examples of how to use it.

Unwind Info

It is also important to verify that the unwind information for these routines are properly set up. Here is a quick checklist of what to check:

• Verify that all labels are of the format .LXXX, where XXX is any valid string for a label. If any other label is used, entries in the symbol table will be generated that include these labels. In that case, you will get an unwind with incorrect function information.
• Verify that all places where pop/pushes or instructions that modify the sp in any way have corresponding cfi information. Along with this item, verify that when registers are pushed on the stack that there is cfi information indicating how to get the register.
• Verify that only cfi directives are being used. This only matters for arm32, where it's possible to use ARM specific unwind directives.

This list is not meant to be exhaustive, but a minimal set of items to verify before submitting a new libc assembler routine. There are difficult to verify unwind cases, such as around branches, where unwind information can be drastically different for the target of the branch and for the code after a branch instruction.