You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
125 lines
3.3 KiB
125 lines
3.3 KiB
#Version check for XTRA
|
|
#DISABLE = 0
|
|
#AUTO = 1
|
|
#XTRA2 = 2
|
|
#XTRA3 = 3
|
|
XTRA_VERSION_CHECK=1
|
|
|
|
# Error Estimate
|
|
# _SET = 1
|
|
# _CLEAR = 0
|
|
ERR_ESTIMATE=0
|
|
|
|
# NTP Server
|
|
# NTP server setting is in modem NV
|
|
|
|
# If NTP_SERVER is commented NTP_SERVER=time.izatcloud.net is used
|
|
|
|
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
|
|
# 4 - Debug, 5 - Verbose
|
|
# If DEBUG_LEVEL is commented, Android's logging levels will be used
|
|
DEBUG_LEVEL = 2
|
|
|
|
# Intermediate position report, 1=enable, 0=disable
|
|
INTERMEDIATE_POS=0
|
|
|
|
# GPS Capabilities bit mask
|
|
# SCHEDULING = 0x01
|
|
# MSB = 0x02
|
|
# MSA = 0x04
|
|
# ON_DEMAND_TIME = 0x10
|
|
# GEOFENCE = 0x20
|
|
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
|
|
CAPABILITIES=0x37
|
|
|
|
# Accuracy threshold for intermediate positions
|
|
# less accurate positions are ignored, 0 for passing all positions
|
|
# ACCURACY_THRES=5000
|
|
|
|
################################
|
|
##### AGPS server settings #####
|
|
################################
|
|
# Bitmask of slots that are available
|
|
# for write/install to, where 1s indicate writable,
|
|
# and the default value is 0 where no slots
|
|
# are writable. For example, AGPS_CERT_WRITABLE_MASK
|
|
# of b1000001010 makes 3 slots available
|
|
# and the remaining 7 slots unwritable.
|
|
# AGPS_CERT_WRITABLE_MASK=0
|
|
|
|
################################
|
|
# EXTRA SETTINGS
|
|
################################
|
|
# NMEA provider (1=Modem Processor, 0=Application Processor)
|
|
NMEA_PROVIDER=0
|
|
|
|
# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
|
|
SGLTE_TARGET=0
|
|
|
|
# Mark these LPPe fields, they are MBN configured.
|
|
##################################################
|
|
# Select technology for LPPe Control Plane
|
|
##################################################
|
|
# 0x1: DBH for LPPe CP
|
|
# 0x2: WLAN AP Measurements for LPPe CP
|
|
# LPPE_CP_TECHNOLOGY = 0
|
|
|
|
##################################################
|
|
# Select technology for LPPe User Plane
|
|
##################################################
|
|
# 0x1: DBH for LPPe UP
|
|
# 0x2: WLAN AP Measurements for LPPe UP
|
|
# LPPE_UP_TECHNOLOGY = 0
|
|
|
|
##################################################
|
|
# AGPS_CONFIG_INJECT
|
|
##################################################
|
|
# enable/disable injection of AGPS configurations:
|
|
# SUPL_VER
|
|
# SUPL_HOST
|
|
# SUPL_PORT
|
|
# SUPL_MODE
|
|
# SUPL_ES
|
|
# C2K_HOST
|
|
# C2K_PORT
|
|
# LPP_PROFILE
|
|
# A_GLONASS_POS_PROTOCOL_SELECT
|
|
# USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL
|
|
# GPS_LOCK
|
|
# 0: disable
|
|
# 1: enable
|
|
AGPS_CONFIG_INJECT = 1
|
|
|
|
# AP Coarse Timestamp Uncertainty
|
|
##################################################
|
|
# default : 10
|
|
# or as per clock uncertainty of product
|
|
AP_TIMESTAMP_UNCERTAINTY = 10
|
|
|
|
#####################################
|
|
#DR_SYNC Pulse Availability
|
|
#####################################
|
|
# 0 : DR_SYNC pulse not available (default)
|
|
# 1 : DR_SYNC pulse available
|
|
DR_SYNC_ENABLED = 0
|
|
|
|
#####################################
|
|
#PPS Device name
|
|
#####################################
|
|
PPS_DEVICENAME = /dev/pps0
|
|
|
|
#####################################
|
|
#AP Clock Accuracy
|
|
#####################################
|
|
AP_CLOCK_PPM = 100
|
|
|
|
#####################################
|
|
#MAX ms difference to detect missing pulse
|
|
#####################################
|
|
MISSING_PULSE_TIME_DELTA = 900
|
|
|
|
#####################################
|
|
#Propagation time uncertainty
|
|
#####################################
|
|
PROPAGATION_TIME_UNCERTAINTY = 1
|