You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
708 lines
18 KiB
708 lines
18 KiB
# This file allows user to override the factory
|
|
# defaults for the WLAN Driver
|
|
|
|
#############################################
|
|
# STA related general configurations
|
|
#############################################
|
|
# Assigned MAC Addresses - This will be used until NV items are in place
|
|
# Each byte of MAC address is represented in Hex format as XX
|
|
Intf0MacAddress=000AF58989FF
|
|
Intf1MacAddress=000AF58989FE
|
|
Intf2MacAddress=000AF58989FD
|
|
Intf3MacAddress=000AF58989FC
|
|
|
|
#Channel Bonding
|
|
gChannelBondingMode5GHz=1
|
|
gChannelBondingMode24GHz=0
|
|
|
|
#Enable Keep alive with non-zero period value
|
|
gStaKeepAlivePeriod=60
|
|
|
|
# Maximum MPDU length (VHT only. Valid values: 0->3895 octets, 1->7991 octets, 2->11454 octets)
|
|
gVhtMpduLen=2
|
|
|
|
# 0 for OLPC 1 for CLPC and SCPC
|
|
gEnableCloseLoop=1
|
|
|
|
ImplicitQosIsEnabled=0
|
|
|
|
# Enable Tx beamforming in VHT20MHz
|
|
# Valid values are 0,1. If commented out, the default value is 0.
|
|
# 0=disable, 1=enable
|
|
gEnableTxBFin20MHz=1
|
|
|
|
#Enable/Disable SU Tx beamformer support.
|
|
gEnableTxSUBeamformer=0
|
|
|
|
# 1=enable tx STBC; 0=disable
|
|
gEnableTXSTBC=1
|
|
|
|
# 1=enable STBC; 0=disable STBC
|
|
gEnableRXSTBC=1
|
|
|
|
# 1=enable rx LDPC; 0=disable
|
|
gEnableRXLDPC=1
|
|
|
|
# Flag to allow STA send AddTspec even when ACM is Off
|
|
gAddTSWhenACMIsOff=1
|
|
|
|
# RTS threshold
|
|
RTSThreshold=1048576
|
|
|
|
# 802.11d support
|
|
g11dSupportEnabled=0
|
|
|
|
|
|
# Phy Mode (auto, b, g, n, etc)
|
|
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
|
|
# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
|
|
# 7 = 11b only 8 = 11ac only.
|
|
gDot11Mode=0
|
|
|
|
# Enable Rx handling options
|
|
# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
|
|
# Rx_thread + NAPI = 5
|
|
rx_mode=5
|
|
|
|
#Enable VHT on 2.4Ghz
|
|
gEnableVhtFor24GHzBand=1
|
|
|
|
# Regulatory Setting; 0=STRICT; 1=CUSTOM
|
|
gRegulatoryChangeCountry=1
|
|
|
|
# userspace country code setting shld take priority
|
|
gCountryCodePriority=1
|
|
|
|
# Enable/Disable LPASS support
|
|
# 0 to disable, 1 to enable
|
|
gEnableLpassSupport=1
|
|
|
|
# Enable(1)/Disable(0) SIFS burst
|
|
gEnableSifsBurst=1
|
|
|
|
# Tx Chain Mask for CCK
|
|
gCckChainMaskEnable=1
|
|
|
|
# Tx Chain Mask for 1SS
|
|
gTxChainMask1ss=0
|
|
|
|
# TPC power
|
|
gSelfGenFrmPwr=3
|
|
|
|
gReportMaxLinkSpeed=0
|
|
|
|
enable_mac_provision=1
|
|
|
|
################ NAN feature set start ###################
|
|
# Enable or Disable NAN
|
|
# 1=Enable (default), 0=Disable
|
|
gEnableNanSupport=1
|
|
genable_nan_datapath=1
|
|
gnan_datapath_ndi_channel=6
|
|
################ NAN feature set end #####################
|
|
|
|
gIgnorePeerHTopMode=1
|
|
gIgnorePeerErpInfo=1
|
|
|
|
# 802.11n Protection flag
|
|
gEnableApProt=1
|
|
|
|
# Fixed Rate
|
|
gFixedRate=0
|
|
|
|
# Intra-BSS forward
|
|
gDisableIntraBssFwd=0
|
|
|
|
# WMM Enable/Disable
|
|
WmmIsEnabled=0
|
|
|
|
# 802.11h support
|
|
g11hSupportEnabled=1
|
|
|
|
#Short Guard Interval Enable/disable
|
|
gShortGI20Mhz=1
|
|
gShortGI40Mhz=1
|
|
|
|
#Auto Shutdown wlan : Value in Seconds. 0 means disabled. Max 1 day = 86400 sec
|
|
gWlanAutoShutdown=0
|
|
|
|
#Preferred band (both or 2.4 only or 5 only)
|
|
BandCapability=0
|
|
|
|
gVhtChannelWidth=2
|
|
|
|
# Enable Tx beamforming
|
|
gTxBFEnable=1
|
|
|
|
# Scan Timing Parameters
|
|
# gPassiveMaxChannelTime=110
|
|
# gPassiveMinChannelTime=60
|
|
gActiveMaxChannelTime=40
|
|
gActiveMinChannelTime=20
|
|
|
|
#If set to 0, MCC is not allowed.
|
|
gEnableMCCMode=1
|
|
|
|
# MCC to SCC Switch mode:
|
|
# 0-Disable
|
|
# 1-Enable
|
|
# 2-Force SCC if same band, with SAP restart
|
|
# 3-Force SCC if same band, without SAP restart by sending (E)CSA
|
|
# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
|
|
# without SAP restart by sending (E)CSA
|
|
gWlanMccToSccSwitchMode = 3
|
|
|
|
# Maximum Receive AMPDU size (VHT only. Valid values: 0->8k 1->16k 2->32k 3->64k 4->128k)
|
|
gVhtAmpduLenExponent=7
|
|
|
|
# Maximum number of concurrent connections
|
|
gMaxConcurrentActiveSessions=3
|
|
|
|
# Radar PRI multiplier
|
|
gDFSradarMappingPriMultiplier=4
|
|
|
|
# Enable or Disable Multi-user MIMO
|
|
# 1=Enable (default), 0=Disable
|
|
gEnableMuBformee=1
|
|
|
|
# Enable to check FW hash if secure FW feature is enabled. It's for defconfig
|
|
# builds only since it will be ignored in performance/release builds.
|
|
gEnableFWHashCheck=1
|
|
|
|
# Enable or Disable MCC Adaptive Scheduler at the FW
|
|
# 1=Enable (default), 0=Disable
|
|
gEnableMCCAdaptiveScheduler=1
|
|
|
|
# Disable/Enable GreenAP
|
|
# 0 to disable, 1 to enable, default: 1
|
|
gEnableGreenAp=0
|
|
|
|
################ Datapath feature set Begin ################
|
|
# Bus bandwidth threshold values in terms of number of packets
|
|
gBusBandwidthHighThreshold=2000
|
|
gBusBandwidthMediumThreshold=500
|
|
gBusBandwidthLowThreshold=150
|
|
|
|
# Bus bandwidth compute timeout value in ms
|
|
gBusBandwidthComputeInterval=100
|
|
|
|
# VHT Tx/Rx MCS values
|
|
# Valid values are 0,1,2. If commented out, the default value is 0.
|
|
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
|
gVhtRxMCS=2
|
|
gVhtTxMCS=2
|
|
|
|
# VHT Tx/Rx MCS values for 2x2
|
|
# Valid values are 0,1,2. If commented out, the default value is 0.
|
|
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
|
gEnable2x2=1
|
|
gVhtRxMCS2x2=2
|
|
gVhtTxMCS2x2=2
|
|
|
|
# Enable/Disable RX full reorder offload
|
|
gReorderOffloadSupported=1
|
|
|
|
# Enable CE classification
|
|
# 1 - enable(default) 0 - disable
|
|
gCEClassifyEnable=1
|
|
|
|
# Enable(Tx) fastpath for data traffic.
|
|
# 1 - enable(default) 0 - disable
|
|
gEnableFastPath=1
|
|
|
|
# This flag enables IP, TCP and UDP checksum offload
|
|
# 1 - enable(default) 0 - disable
|
|
gEnableIpTcpUdpChecksumOffload=1
|
|
|
|
# Enable TCP Segmentation Offload
|
|
# 1 - enable 0 - disable
|
|
TSOEnable=1
|
|
|
|
# Enable Generic Receive Offload
|
|
# LRO and GRO are exclusive to each other
|
|
# LRO support is deprecated on latest 4.9(SDM845) kernel
|
|
GROEnable=1
|
|
|
|
# Enable HT MPDU Density
|
|
# 4 for 2 micro sec
|
|
ght_mpdu_density=4
|
|
|
|
# Enable flow steering to enable multiple CEs for Rx flows.
|
|
# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
|
|
# Parallel Rx paths.
|
|
# 1 - enable 0 - disable(default)
|
|
gEnableFlowSteering=1
|
|
|
|
ce_service_max_yield_time=500
|
|
ce_service_max_rx_ind_flush=1
|
|
maxMSDUsPerRxInd=8
|
|
|
|
gEnableDataStallDetection=0
|
|
|
|
gTcpLimitOutputEnable=0
|
|
|
|
################ Datapath feature set End ################
|
|
|
|
#############################################
|
|
# SCAN related configurations
|
|
#############################################
|
|
# Enable/Disable Idle Scan
|
|
gEnableIdleScan=0
|
|
|
|
#Enable Scan Results Aging based on timer
|
|
#Timer value is in seconds
|
|
#If Set to 0 it will not enable the feature
|
|
gScanAgingTime=30
|
|
|
|
#Enable Scan Results Aging based on number of scans
|
|
gScanResultAgeCount=1
|
|
|
|
#Enable thermal mitigation
|
|
gThermalMitigationEnable=0
|
|
|
|
#Maximum Channel time in msec
|
|
gMaxMediumTime=6000
|
|
|
|
gPNOScanSupport=1
|
|
|
|
# Enable or Disable Extended Scan (GScan)
|
|
# 1=Enable (default), 0=Disable
|
|
gExtScanEnable=1
|
|
|
|
#If set will start with active scan after driver load, otherwise will start with
|
|
#passive scan to find out the domain
|
|
gEnableBypass11d=1
|
|
|
|
#If set to 0, will not scan DFS channels
|
|
gEnableDFSChnlScan=1
|
|
|
|
#Maxium Channel time in msec
|
|
gMaxMediumTime = 6000
|
|
|
|
adaptive_dwell_mode_enabled=1
|
|
|
|
hostscan_adaptive_dwell_mode=1
|
|
|
|
adapt_dwell_lpf_weight=80
|
|
|
|
adapt_dwell_wifi_act_threshold=10
|
|
|
|
# Enable or disable Probe Req Information Element whitelist. When enabled, IEs corresponding to bits
|
|
# set in bitmaps are allowed in probe request, all others removed while device is unassociated
|
|
# with an AP
|
|
# 1=Enable, 0=Disable (default)
|
|
g_enable_probereq_whitelist_ies=1
|
|
|
|
# ie bitmap examples: <bitmap_name>=<value> [<Allowed Information elements>]
|
|
# g_probe_req_ie_bitmap_0=0x80000009 #[0, 3, 31]
|
|
# g_probe_req_ie_bitmap_0=0x00000000 #[] (default)
|
|
# g_probe_req_ie_bitmap_1=0x80000009 #[32, 35, 63]
|
|
g_probe_req_ie_bitmap_0=0x0000000B
|
|
g_probe_req_ie_bitmap_1=0x00040000
|
|
# g_probe_req_ie_bitmap_2=0x00000000
|
|
# g_probe_req_ie_bitmap_3=0x00000000
|
|
# g_probe_req_ie_bitmap_4=0x00000000
|
|
# g_probe_req_ie_bitmap_5=0x00000000
|
|
g_probe_req_ie_bitmap_6=0x20000000
|
|
# g_probe_req_ie_bitmap_7=0x00000000
|
|
|
|
gProbeReqOUIs=0050F208
|
|
|
|
#############################################
|
|
# Power related configurations
|
|
#############################################
|
|
# Enable IMPS or not
|
|
gEnableImps=1
|
|
|
|
# Enable BMPS or not
|
|
gEnableBmps=1
|
|
|
|
# Increase sleep duration (seconds) during IMPS
|
|
# 0 implies no periodic wake up from IMPS. Periodic wakeup is
|
|
# unnecessary if Idle Scan is disabled.
|
|
gImpsModSleepTime=0
|
|
|
|
# UAPSD service interval for VO,VI, BE, BK traffic
|
|
InfraUapsdVoSrvIntv=0
|
|
InfraUapsdViSrvIntv=0
|
|
InfraUapsdBeSrvIntv=0
|
|
InfraUapsdBkSrvIntv=0
|
|
|
|
# Enable suspend or not
|
|
# 1: Enable standby, 2: Enable Deep sleep, 3: Enable Mcast/Bcast Filter
|
|
gEnableSuspend=3
|
|
|
|
#Enable Power Save offload
|
|
gEnablePowerSaveOffload=2
|
|
|
|
#Enable Power saving mechanism Based on Android Framework
|
|
#If set to 0 Driver internally control the Power saving mechanism
|
|
#If set to 1 Android Framwrok control the Power saving mechanism
|
|
isAndroidPsEn=0
|
|
|
|
beaconEarlyTerminationWakeInterval=3
|
|
|
|
#Data Inactivity Timeout when in powersave (in ms)
|
|
gDataInactivityTimeout=200
|
|
|
|
# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
|
|
gIbssTxSpEndInactivityTime=10
|
|
|
|
gEnableModulatedDTIM=2
|
|
gMaxLIModulatedDTIM=6
|
|
|
|
#############################################
|
|
# Roaming related configurations
|
|
#############################################
|
|
# CSR Roaming Enable(1) Disable(0)
|
|
gRoamingTime=0
|
|
|
|
# ESE Support and fast transition
|
|
EseEnabled=1
|
|
|
|
gNeighborLookupThreshold=76
|
|
gNeighborReassocThreshold=81
|
|
gNeighborScanChannelMinTime=20
|
|
gNeighborScanChannelMaxTime=30
|
|
gMaxNeighborReqTries=3
|
|
|
|
# To enable, set gRoamIntraBand=1 (Roaming within band)
|
|
# To disable, set gRoamIntraBand=0 (Roaming across band)
|
|
gRoamIntraBand=0
|
|
|
|
# Legacy (non-ESE, non-802.11r) Fast Roaming Support
|
|
# To enable, set FastRoamEnabled=1
|
|
# To disable, set FastRoamEnabled=0
|
|
FastRoamEnabled=1
|
|
|
|
#Check if the AP to which we are roaming is better than current AP in terms of RSSI.
|
|
#Checking is disabled if set to Zero.Otherwise it will use this value as to how better
|
|
#the RSSI of the new/roamable AP should be for roaming
|
|
RoamRssiDiff=3
|
|
|
|
# If the RSSI of any available candidate is better than currently associated
|
|
# AP by at least gImmediateRoamRssiDiff, then being to roam immediately (without
|
|
# registering for reassoc threshold).
|
|
# NOTE: Value of 0 means that we would register for reassoc threshold.
|
|
gImmediateRoamRssiDiff=10
|
|
|
|
# 802.11K support
|
|
gRrmEnable=1
|
|
gRrmOperChanMax=8
|
|
gRrmNonOperChanMax=8
|
|
|
|
gEnableFastRoamInConcurrency=1
|
|
|
|
# Enable/Disable Roaming Offload Support (a.k.a Key Management Offload)
|
|
# 0 to disable, 1 to enable
|
|
gRoamOffloadEnabled=1
|
|
|
|
gAllowDFSChannelRoam=1
|
|
|
|
gLFRSubnetDetectionEnable=0
|
|
|
|
#############################################
|
|
# Offload related configurations
|
|
#############################################
|
|
# Beacon filtering frequency (unit in beacon intervals)
|
|
gNthBeaconFilter=50
|
|
|
|
# Enable WAPI or not
|
|
# WAPIIsEnabled=0
|
|
|
|
#Flag to enable HostARPOffload feature or not
|
|
hostArpOffload=1
|
|
|
|
#Flag to enable HostNSOffload feature or not
|
|
hostNSOffload=1
|
|
|
|
# controlling the following offload patterns
|
|
# through ini parameter. Default value is 1
|
|
# to disable set it to zero. ssdp = 0
|
|
# Setup multicast pattern for mDNS 224.0.0.251,
|
|
# SSDP 239.255.255.250 and LLMNR 224.0.0.252
|
|
ssdp = 0
|
|
|
|
#Enable MC address filtering offload
|
|
gMCAddrListEnable=1
|
|
|
|
#Enable Active mode offload
|
|
gActiveModeOffload=1
|
|
|
|
#Enable Active mode offload
|
|
gEnableActiveModeOffload=1
|
|
|
|
#Enable APF in Active mode
|
|
gActiveUcBpfMode=2
|
|
gActiveMcBcBpfMode=1
|
|
|
|
#HW CCE Filter mode
|
|
gHwFilterMode=0
|
|
|
|
# WOW Enable/Disable.
|
|
# 0 - Disable both magic pattern match and pattern byte match.
|
|
# 1 - Enable magic pattern match on all interfaces.
|
|
# 2 - Enable pattern byte match on all interfaces.
|
|
# 3 - Enable both magic patter and pattern byte match on all interfaces.
|
|
# Default value of gEnableWoW is 3.
|
|
# gEnableWoW=0
|
|
|
|
11k_offload_enable_bitmask=0
|
|
|
|
|
|
#############################################
|
|
# Logging related configurations
|
|
#############################################
|
|
gEnableLogp=1
|
|
|
|
gEnableSelfRecovery=1
|
|
|
|
#Enable firmware log
|
|
gEnablefwlog=1
|
|
# Additional firmware log levels
|
|
gFwDebugLogLevel=3
|
|
gFwDebugModuleLoglevel=2,1,3,1,5,1,9,1,13,1,14,1,18,1,19,1,26,1,28,1,29,1,31,1,36,1,38,1,46,1,47,1,50,1,52,1,53,1,56,1,60,1,61,1,4,1
|
|
|
|
#Enable firmware uart print
|
|
gEnablefwprint=0
|
|
|
|
#############################################
|
|
# TDLS related configurations
|
|
#############################################
|
|
# Enable support for TDLS
|
|
# 0 - disable
|
|
# 1 - enable
|
|
gEnableTDLSSupport=1
|
|
|
|
# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
|
|
# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
|
|
# and RSSI) is met and then will initiate teardown when teardown criteria
|
|
# (idle packet count and RSSI) is met.
|
|
# 0 - disable
|
|
# 1 - enable
|
|
gEnableTDLSImplicitTrigger=1
|
|
|
|
# Enable TDLS External Control. That is, user space application has to
|
|
# first configure a peer MAC in wlan driver towards which TDLS is desired.
|
|
# Device will establish TDLS only towards those configured peers whenever
|
|
# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
|
|
# when teardown criteria (idle packet count and RSSI) is met. However,
|
|
# device will accept TDLS connection if it is initiated from any other peer,
|
|
# even if that peer is not configured.
|
|
# 0 - disable
|
|
# 1 - enable
|
|
# For TDLS External Control, Implicit Trigger must also be enabled.
|
|
gTDLSExternalControl=1
|
|
|
|
# Enable support for TDLS off-channel operation
|
|
# 0 - disable
|
|
# 1 - enable
|
|
# TDLS off-channel operation will be invoked when there is only one
|
|
# TDLS connection.
|
|
gEnableTDLSOffChannel=0
|
|
|
|
gEnableTDLSScan=1
|
|
gTDLSTxPacketThreshold=10
|
|
gTDLSIdlePacketThreshold=1
|
|
|
|
#############################################
|
|
# P2P related configurations
|
|
#############################################
|
|
#P2P Listen offload
|
|
gEnableP2pListenOffload=1
|
|
|
|
#Enable or Disable p2p device address administered
|
|
isP2pDeviceAddrAdministrated=0
|
|
|
|
#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
|
|
#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link is idle for last 10 seconds.)
|
|
#For both active and power save clients.
|
|
|
|
#Power save clients: DUT set TIM bit from 10th second onwards and till client honors TIM bit.
|
|
#If doesn't honor for 5 seconds then DUT remove client.
|
|
|
|
# chain mask related params
|
|
#
|
|
# Set txchainmask and rxchainmask
|
|
# These parameters are used only if gEnable2x2 is 0
|
|
# Valid values are 1,2
|
|
# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
|
|
# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
|
|
gSetTxChainmask1x1=1
|
|
gSetRxChainmask1x1=1
|
|
|
|
# Following parameters are for test purpose only and when set will
|
|
# configure tx and rx per band chain mask. These parameters will
|
|
# take effect only when:
|
|
# gEnable2x2=0
|
|
# gDualMacFeatureDisable=1
|
|
# gSetTxChainmask1x1=0
|
|
# gSetRxChainmask1x1=0
|
|
# These are defaulted to 0 with following definitions:
|
|
# 0: don't care
|
|
# 1: use chain 0
|
|
# 2: use chain 1
|
|
# 3: can use either chain
|
|
tx_chain_mask_2g=0
|
|
rx_chain_mask_2g=0
|
|
tx_chain_mask_5g=0
|
|
rx_chain_mask_5g=0
|
|
|
|
gForce1x1Exception=0
|
|
|
|
#IPA config is a bit mask and following are the configurations.
|
|
#bit0 IPA Enable
|
|
#bit1 IPA PRE Filter enable
|
|
#bit2 IPv6 enable
|
|
#bit3 IPA Resource Manager (RM) enable
|
|
#bit4 IPA Clock scaling enable
|
|
#bit5 IPA uC ENABLE
|
|
#bit6 IPA uC STA ENABLE
|
|
#bit7 IPA Real Time Debugging
|
|
gIPAConfig=0x7d
|
|
gIPADescSize=800
|
|
|
|
#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and it is period
|
|
#where we send NULL frame.
|
|
|
|
#gApLinkMonitorPeriod = 10
|
|
#gGoLinkMonitorPeriod = 10
|
|
|
|
#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame are succeed to send or not.
|
|
#Hence total effective detection time is gGoLinkMonitorPeriod+ gGoKeepAlivePeriod/gApLinkMonitorPeriod+ gApKeepAlivePeriod.
|
|
gGoKeepAlivePeriod = 20
|
|
gApKeepAlivePeriod = 20
|
|
|
|
#############################################
|
|
# SAP related configurations
|
|
#############################################
|
|
#Enable OBSS protection
|
|
gEnableApOBSSProt=1
|
|
|
|
#Enable/Disable UAPSD for SoftAP
|
|
gEnableApUapsd=1
|
|
|
|
# SAP auto channel selection configuration
|
|
# 0 = disable auto channel selection
|
|
# 1 = enable auto channel selection, channel provided by supplicant will be ignored
|
|
gApAutoChannelSelection=0
|
|
|
|
#SOFTAP Channel Range selection
|
|
gAPChannelSelectStartChannel=1
|
|
gAPChannelSelectEndChannel=11
|
|
|
|
# SAP Country code
|
|
# Default Country Code is 2 bytes, 3rd byte is optional indoor or out door.
|
|
# Example
|
|
# US Indoor, USI
|
|
# Korea Outdoor, KRO
|
|
# Japan without optional byte, JP
|
|
# France without optional byte, FR
|
|
#gAPCntryCode=USI
|
|
|
|
# DFS Master Capability
|
|
gEnableDFSMasterCap=0
|
|
|
|
#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled
|
|
gAPAutoShutOff=0
|
|
|
|
# Remove Overlap channel restriction
|
|
gEnableOverLapCh=0
|
|
|
|
# Enable/Disable channel avoidance for SAP in SCC scenario
|
|
# 0 - disable
|
|
# 1 - enable
|
|
gSapSccChanAvoidance=0
|
|
|
|
#Enable/Disable Tx beamformee in SAP mode
|
|
gEnableTxBFeeSAP=1
|
|
|
|
|
|
|
|
#Enable/Disable dual MAC feature
|
|
# 0 - enable DBS
|
|
# 1 - disable DBS
|
|
# 2 - disable DBS for connection but keep DBS for scan
|
|
# 3 - disable DBS for connection but keep DBS scan with async
|
|
# scan policy disabled
|
|
# 4 - enable DBS for connection as well as for scan with async
|
|
# scan policy disabled
|
|
# 5 - enable DBS for connection but disable dbs for scan.
|
|
# 6 - enable DBS for connection but disable simultaneous scan from
|
|
# upper layer (DBS scan remains enabled in FW).
|
|
gDualMacFeatureDisable=6
|
|
|
|
# Turn on STA + AP/STA
|
|
gEnableConcurrentSTA=wlan1
|
|
|
|
# 0 - Disallow STA+SAP SCC on LTE coex channel
|
|
# 1 - Allow STA+SAP SCC on LTE coex channel
|
|
g_sta_sap_scc_on_lte_coex_chan=1
|
|
|
|
#Set priority for connection with bssid_hint
|
|
g_is_bssid_hint_priority=0
|
|
|
|
gdbs_scan_selection=5,4,1,16,4,1
|
|
|
|
enable_11d_in_world_mode=1
|
|
|
|
gDptraceConfig=1,4,1,126
|
|
|
|
#############################################
|
|
# MAWC related configurations
|
|
#############################################
|
|
|
|
# MAWCEnabled - Enable/Disable Motion Aided Wireless Connectivity Global
|
|
MAWCEnabled=0
|
|
|
|
# mawc_roam_enabled - Enable/Disable MAWC during roaming
|
|
mawc_roam_enabled=0
|
|
|
|
# Enable/Disable the Motion Aided Wireless Connectivity
|
|
# based NLO using this parameter
|
|
mawc_nlo_enabled=0
|
|
|
|
#Enable/Disable chain selection optimization for one chain dtim
|
|
#Min: 0
|
|
#MAX: 30
|
|
gEnableDTIMSelectionDiversity=3
|
|
|
|
# Enable/Disable rtt sta mac randomization
|
|
enable_rtt_mac_randomization=1
|
|
|
|
gAP11ACOverride=0
|
|
|
|
channel_select_logic_conc=0x0
|
|
|
|
gConfigVCmode=0
|
|
|
|
wlm_latency_flags_moderate=0
|
|
wlm_latency_flags_low=0
|
|
wlm_latency_flags_ultralow=0
|
|
|
|
oce_sta_enable=0
|
|
oce_sap_enable=0
|
|
num_oce_wan_slots=0
|
|
oce_wan_score_idx7_to_4=0
|
|
oce_wan_score_idx11_to_8=0
|
|
oce_enable_rssi_assoc_reject=0
|
|
|
|
# Enable/Disable rtt sta mac randomization
|
|
enable_rtt_mac_randomization=1
|
|
|
|
#Enable/Disable Secondary Retry Rate feature subset
|
|
gEnableSecondaryRate=0x17
|
|
|
|
#Timer waiting for interface up from the upper layer
|
|
gInterfaceChangeWait=1000
|
|
|
|
#Enable Bmps(power save in connected state) based on timer
|
|
#Timer value is in seconds
|
|
gAutoBmpsTimerValue=90
|
|
|
|
#Enable/Disable 802.11ai FILS support
|
|
g_is_fils_enabled=0
|
|
END
|
|
|
|
# Note: Configuration parser would not read anything past the END marker
|