You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
95 lines
2.8 KiB
95 lines
2.8 KiB
Intel Stratix 10 SoCFPGA
|
|
========================
|
|
|
|
Stratix 10 SoCFPGA is a FPGA with integrated quad-core 64-bit Arm Cortex A53 processor.
|
|
|
|
Upon boot, Boot ROM loads bl2 into OCRAM. Bl2 subsequently initializes
|
|
the hardware, then loads bl31 and bl33 (UEFI) into DDR and boots to bl33.
|
|
|
|
::
|
|
|
|
Boot ROM --> Trusted Firmware-A --> UEFI
|
|
|
|
How to build
|
|
------------
|
|
|
|
Code Locations
|
|
~~~~~~~~~~~~~~
|
|
|
|
- Trusted Firmware-A:
|
|
`link <https://github.com/ARM-software/arm-trusted-firmware>`__
|
|
|
|
- UEFI (to be updated with new upstreamed UEFI):
|
|
`link <https://github.com/altera-opensource/uefi-socfpga>`__
|
|
|
|
Build Procedure
|
|
~~~~~~~~~~~~~~~
|
|
|
|
- Fetch all the above 2 repositories into local host.
|
|
Make all the repositories in the same ${BUILD\_PATH}.
|
|
|
|
- Prepare the AARCH64 toolchain.
|
|
|
|
- Build UEFI using Stratix 10 platform as configuration
|
|
This will be updated to use an updated UEFI using the latest EDK2 source
|
|
|
|
.. code:: bash
|
|
|
|
make CROSS_COMPILE=aarch64-linux-gnu- device=s10
|
|
|
|
- Build atf providing the previously generated UEFI as the BL33 image
|
|
|
|
.. code:: bash
|
|
|
|
make CROSS_COMPILE=aarch64-linux-gnu- bl2 fip PLAT=stratix10
|
|
BL33=PEI.ROM
|
|
|
|
Install Procedure
|
|
~~~~~~~~~~~~~~~~~
|
|
|
|
- dd fip.bin to a A2 partition on the MMC drive to be booted in Stratix 10
|
|
board.
|
|
|
|
- Generate a SOF containing bl2
|
|
|
|
.. code:: bash
|
|
|
|
aarch64-linux-gnu-objcopy -I binary -O ihex --change-addresses 0xffe00000 bl2.bin bl2.hex
|
|
quartus_cpf --bootloader bl2.hex <quartus_generated_sof> <output_sof_with_bl2>
|
|
|
|
- Configure SOF to board
|
|
|
|
.. code:: bash
|
|
|
|
nios2-configure-sof <output_sof_with_bl2>
|
|
|
|
Boot trace
|
|
----------
|
|
|
|
::
|
|
|
|
INFO: DDR: DRAM calibration success.
|
|
INFO: ECC is disabled.
|
|
INFO: Init HPS NOC's DDR Scheduler.
|
|
NOTICE: BL2: v2.0(debug):v2.0-809-g7f8474a-dirty
|
|
NOTICE: BL2: Built : 17:38:19, Feb 18 2019
|
|
INFO: BL2: Doing platform setup
|
|
INFO: BL2: Loading image id 3
|
|
INFO: Loading image id=3 at address 0xffe1c000
|
|
INFO: Image id=3 loaded: 0xffe1c000 - 0xffe24034
|
|
INFO: BL2: Loading image id 5
|
|
INFO: Loading image id=5 at address 0x50000
|
|
INFO: Image id=5 loaded: 0x50000 - 0x550000
|
|
NOTICE: BL2: Booting BL31
|
|
INFO: Entry point address = 0xffe1c000
|
|
INFO: SPSR = 0x3cd
|
|
NOTICE: BL31: v2.0(debug):v2.0-810-g788c436-dirty
|
|
NOTICE: BL31: Built : 15:17:16, Feb 20 2019
|
|
INFO: ARM GICv2 driver initialized
|
|
INFO: BL31: Initializing runtime services
|
|
WARNING: BL31: cortex_a53: CPU workaround for 855873 was missing!
|
|
INFO: BL31: Preparing for EL3 exit to normal world
|
|
INFO: Entry point address = 0x50000
|
|
INFO: SPSR = 0x3c9
|
|
UEFI firmware (version 1.0 built at 11:26:18 on Nov 7 2018)
|