king
/
v811_spc009
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'main'
${ noResults }
v811_spc009/external/cpuinfo/test/dmesg/nexus10.log

768 lines
52 KiB
Raw Permalink Blame History

<6>[ 0.000000] Booting Linux on physical CPU 0
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 3.4.67-g84ad5a4 (android-build@wpee22.hot.corp.google.com) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Fri Nov 13 21:33:05 UTC 2015
<4>[ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d
<4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<4>[ 0.000000] Machine: Manta
<6>[ 0.000000] Initialized persistent memory from a0000000-a01fffff
<6>[ 0.000000] ion_reserve: ion_chunk_heap reserved base 90000000 size 268435456
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
<4>[ 0.000000] CPU EXYNOS5250 (id 0x43520210)
<7>[ 0.000000] exynos5_init_clocks: initializing clocks
<6>[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
<3>[ 0.000000] clkout: bad source 0
<7>[ 0.000000] exynos5_setup_clocks: registering clocks
<7>[ 0.000000] exynos5_setup_clocks: xtal is 24000000
<6>[ 0.000000] EXYNOS5: PLL settings, A=1000000000, B=1333090909, C=333000000
<6>[ 0.000000] M=1600000000, E=96000000, V=300000000, G=533000000
<6>[ 0.000000] EXYNOS5: ARMCLK=1000000000, CDREX=800000000, ACLK400=533000000
<6>[ 0.000000] ACLK333=333000000, ACLK266=266666666, ACLK200=200000000
<6>[ 0.000000] ACLK166=166500000, ACLK66=66666666
<6>[ 0.000000] sclk_fimd: source is ext_xtal (0), rate is 24000000
<6>[ 0.000000] sclk_g3d: source is mout_mpll_user (0), rate is 800000000
<6>[ 0.000000] sclk_gscl_wrap0: source is ext_xtal (0), rate is 24000000
<6>[ 0.000000] sclk_gscl_wrap1: source is ext_xtal (0), rate is 24000000
<6>[ 0.000000] sclk_bayer: source is ext_xtal (0), rate is 24000000
<6>[ 0.000000] sclk_cam0: source is ext_xtal (0), rate is 24000000
<6>[ 0.000000] sclk_cam1: source is ext_xtal (0), rate is 24000000
<6>[ 0.000000] sclk_jpeg: source is ext_xtal (0), rate is 24000000
<6>[ 0.000000] sclk_usbdrd30: source is mout_mpll (0), rate is 66666666
<7>[ 0.000000] On node 0 totalpages: 524032
<7>[ 0.000000] free_area_init_node: node 0, pgdat c0914a40, node_mem_map c09fa000
<7>[ 0.000000] Normal zone: 992 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 125984 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 3102 pages used for memmap
<7>[ 0.000000] HighMem zone: 393954 pages, LIFO batch:31
<6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @c1a07000 s12352 r0 d16320 u32768
<7>[ 0.000000] pcpu-alloc: s12352 r0 d16320 u32768 alloc=8*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519938
<5>[ 0.000000] Kernel command line: vmalloc=512M debug_core.break_on_panic=0 debug_core.break_on_exception=0 no_console_suspend s3c2410-wdt.tmr_atboot=1 s3c2410-wdt.tmr_margin=30 wire.search_count=5 s3cfb.bootloaderfb=0x60000000 androidboot.bootloader=MANTAMF01 androidboot.serialno=R32D303GS1H androidboot.wifimacaddr=A8:06:00:C5:16:21 androidboot.btmacaddr=A8:06:00:C5:16:20
<6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] allocated 4192256 bytes of page_cgroup
<6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
<6>[ 0.000000] Memory: 2047MB = 2047MB total
<5>[ 0.000000] Memory: 1124648k/1124648k available, 971480k reserved, 648576K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] .text : 0xc0008000 - 0xc084d000 (8468 kB)
<5>[ 0.000000] .init : 0xc084d000 - 0xc088d040 ( 257 kB)
<5>[ 0.000000] .data : 0xc088e000 - 0xc09296f0 ( 622 kB)
<5>[ 0.000000] .bss : 0xc0929714 - 0xc09f9d00 ( 834 kB)
<6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[ 0.000000] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] NR_IRQS:597
<6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<6>[ 0.000049] Calibrating delay loop... 997.78 BogoMIPS (lpj=2494464)
<6>[ 0.030033] pid_max: default: 32768 minimum: 301
<6>[ 0.030166] Security Framework initialized
<6>[ 0.030188] SELinux: Initializing.
<7>[ 0.030220] SELinux: Starting in permissive mode
<6>[ 0.030347] Mount-cache hash table entries: 512
<6>[ 0.031085] Initializing cgroup subsys debug
<6>[ 0.031096] Initializing cgroup subsys cpuacct
<6>[ 0.031105] Initializing cgroup subsys memory
<6>[ 0.031136] Initializing cgroup subsys freezer
<6>[ 0.031173] CPU: Testing write buffer coherency: ok
<6>[ 0.031300] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[ 0.031332] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
<6>[ 0.031375] Setting up static identity map for 0x40658f08 - 0x40658f60
<4>[ 0.085725] CPU1: Booted secondary processor
<6>[ 0.111319] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<2>[ 0.111360] CPU1: Unknown IPI message 0x1
<6>[ 0.111471] Brought up 2 CPUs
<6>[ 0.111483] SMP: Total of 2 processors activated (1995.57 BogoMIPS).
<6>[ 0.122075] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
<6>[ 0.122271] gpiochip_add: registered GPIOs 0 to 7 on device: GPA0
<6>[ 0.122283] gpiochip_add: registered GPIOs 9 to 14 on device: GPA1
<6>[ 0.122294] gpiochip_add: registered GPIOs 16 to 23 on device: GPA2
<6>[ 0.122304] gpiochip_add: registered GPIOs 25 to 29 on device: GPB0
<6>[ 0.122313] gpiochip_add: registered GPIOs 31 to 35 on device: GPB1
<6>[ 0.122323] gpiochip_add: registered GPIOs 37 to 40 on device: GPB2
<6>[ 0.122332] gpiochip_add: registered GPIOs 42 to 45 on device: GPB3
<6>[ 0.122341] gpiochip_add: registered GPIOs 47 to 53 on device: GPC0
<6>[ 0.122351] gpiochip_add: registered GPIOs 55 to 58 on device: GPC1
<6>[ 0.122360] gpiochip_add: registered GPIOs 60 to 66 on device: GPC2
<6>[ 0.122369] gpiochip_add: registered GPIOs 68 to 74 on device: GPC3
<6>[ 0.122379] gpiochip_add: registered GPIOs 76 to 79 on device: GPD0
<6>[ 0.122388] gpiochip_add: registered GPIOs 81 to 88 on device: GPD1
<6>[ 0.122397] gpiochip_add: registered GPIOs 90 to 95 on device: GPY0
<6>[ 0.122406] gpiochip_add: registered GPIOs 97 to 100 on device: GPY1
<6>[ 0.122416] gpiochip_add: registered GPIOs 102 to 107 on device: GPY2
<6>[ 0.122425] gpiochip_add: registered GPIOs 109 to 116 on device: GPY3
<6>[ 0.122435] gpiochip_add: registered GPIOs 118 to 125 on device: GPY4
<6>[ 0.122444] gpiochip_add: registered GPIOs 127 to 134 on device: GPY5
<6>[ 0.122453] gpiochip_add: registered GPIOs 136 to 143 on device: GPY6
<6>[ 0.122462] gpiochip_add: registered GPIOs 145 to 151 on device: GPC4
<6>[ 0.122472] gpiochip_add: registered GPIOs 153 to 160 on device: GPX0
<6>[ 0.122481] gpiochip_add: registered GPIOs 162 to 169 on device: GPX1
<6>[ 0.122490] gpiochip_add: registered GPIOs 171 to 178 on device: GPX2
<6>[ 0.122499] gpiochip_add: registered GPIOs 180 to 187 on device: GPX3
<6>[ 0.122515] gpiochip_add: registered GPIOs 189 to 196 on device: GPE0
<6>[ 0.122524] gpiochip_add: registered GPIOs 198 to 199 on device: GPE1
<6>[ 0.122533] gpiochip_add: registered GPIOs 201 to 204 on device: GPF0
<6>[ 0.122542] gpiochip_add: registered GPIOs 206 to 209 on device: GPF1
<6>[ 0.122551] gpiochip_add: registered GPIOs 211 to 218 on device: GPG0
<6>[ 0.122561] gpiochip_add: registered GPIOs 220 to 227 on device: GPG1
<6>[ 0.122570] gpiochip_add: registered GPIOs 229 to 230 on device: GPG2
<6>[ 0.122579] gpiochip_add: registered GPIOs 232 to 235 on device: GPH0
<6>[ 0.122588] gpiochip_add: registered GPIOs 237 to 244 on device: GPH1
<6>[ 0.122603] gpiochip_add: registered GPIOs 246 to 253 on device: GPV0
<6>[ 0.122612] gpiochip_add: registered GPIOs 255 to 262 on device: GPV1
<6>[ 0.122621] gpiochip_add: registered GPIOs 264 to 271 on device: GPV2
<6>[ 0.122630] gpiochip_add: registered GPIOs 273 to 280 on device: GPV3
<6>[ 0.122640] gpiochip_add: registered GPIOs 282 to 283 on device: GPV4
<3>[ 0.122652] gpio: GPZ has no PM function
<6>[ 0.122660] gpiochip_add: registered GPIOs 285 to 291 on device: GPZ
<6>[ 0.122874] dummy:
<6>[ 0.123095] NET: Registered protocol family 16
<6>[ 0.123409] Registered FIQ tty driver
<6>[ 0.123443] Last reset was software reset (RST_STAT=0x20000000)
<6>[ 0.125575] Manta HW revision: 8, CPU EXYNOS5250 Rev1.0
<6>[ 0.129058] console [ttyFIQ2] enabled
<6>[ 0.129144] Registered fiq debugger ttyFIQ2
<6>[ 0.129421] persistent_ram: found existing buffer, size 36878, start 36878
<6>[ 0.218636] console [ram-1] enabled
<6>[ 0.220239] bootloader fb located at 60000000-60F9FFFF
<6>[ 0.220359] Registered chained gpio int handler for interrupt 77.
<6>[ 0.220445] Registered interrupt support for gpio group 19.
<6>[ 0.222554] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[ 0.222671] hw-breakpoint: maximum watchpoint size is 8 bytes.
<4>[ 0.222854] S3C Power Management, Copyright 2004 Simtec Electronics
<6>[ 0.223180] EXYNOS5250 PMU Initialize
<6>[ 0.224031] EXYNOS: Initializing architecture
<6>[ 0.224426] s3c24xx-pwm s3c24xx-pwm.0: tin at 33333333, tdiv at 33333333, tin=divclk, base 0
<6>[ 0.224611] s3c24xx-pwm s3c24xx-pwm.1: tin at 16666666, tdiv at 16666666, tin=divclk, base 8
<6>[ 0.231763] bio: create slab <bio-0> at 0
<6>[ 0.232155] MXT_BOOSTER:
<6>[ 0.232333] MXT_XVDD:
<6>[ 0.232449] MXT_XVDD: supplied by MXT_BOOSTER
<6>[ 0.232676] VBATT: 3700 mV
<6>[ 0.621776] ion_chunk_heap_create: base 2415919104 size 268435456 align 1048576
<5>[ 0.622327] SCSI subsystem initialized
<6>[ 0.623113] usbcore: registered new interface driver usbfs
<6>[ 0.623270] usbcore: registered new interface driver hub
<6>[ 0.623407] usbcore: registered new device driver usb
<6>[ 0.623709] wake enabled for irq 439
<6>[ 0.623819] wake enabled for irq 432
<6>[ 0.623926] wake enabled for irq 433
<6>[ 0.624037] GPIO Input Driver: Start gpio inputs for manta-keypad... in interrupt mode
<6>[ 0.624156] wake enabled for irq 427
<6>[ 0.624266] GPIO Input Driver: Start gpio inputs for manta-keypad... in interrupt mode
<6>[ 0.624454] input: manta-keypad as /devices/virtual/input/input0
<6>[ 0.624676] input: manta-switch as /devices/virtual/input/input1
<6>[ 0.625198] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
<6>[ 0.625314] s3c-i2c s3c2440-i2c.0: slave address 0x10
<6>[ 0.625378] s3c-i2c s3c2440-i2c.0: bus frequency set to 65 KHz
<6>[ 0.625767] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
<6>[ 0.625834] s3c-i2c s3c2440-i2c.1: slave address 0x10
<6>[ 0.625945] s3c-i2c s3c2440-i2c.1: bus frequency set to 378 KHz
<6>[ 0.626291] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
<6>[ 0.626434] s3c-i2c s3c2440-i2c.2: slave address 0x10
<6>[ 0.626499] s3c-i2c s3c2440-i2c.2: bus frequency set to 378 KHz
<6>[ 0.626796] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
<6>[ 0.626862] s3c-i2c s3c2440-i2c.3: slave address 0x10
<6>[ 0.626972] s3c-i2c s3c2440-i2c.3: bus frequency set to 378 KHz
<6>[ 0.627262] s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter
<6>[ 0.627376] s3c-i2c s3c2440-i2c.4: slave address 0x10
<6>[ 0.627439] s3c-i2c s3c2440-i2c.4: bus frequency set to 378 KHz
<6>[ 0.627887] max77686 5-0009: device found
<6>[ 0.634709] max77686_pmic_probe: Device ID=0x09, (version:1, chip_rev:1)
<6>[ 0.634921] max77686-pmic max77686-pmic: Power on triggered by ACOKB=Low
<6>[ 0.638161] vdd_mif range: 850 <--> 1200 mV at 1037 mV
<6>[ 0.638945] vdd_arm range: 850 <--> 1500 mV at 1075 mV
<6>[ 0.639671] vdd_int range: 850 <--> 1300 mV at 1037 mV
<6>[ 0.640412] vdd_g3d range: 850 <--> 1250 mV at 1200 mV
<6>[ 0.641432] VCC_1.8V_AP: 1800 mV
<6>[ 0.642409] VMIPI_1.0V: 1000 mV
<6>[ 0.643145] TOUCH_VDD_1.8V: 1800 mV
<6>[ 0.644171] VMIPI_1.8V: 1800 mV
<6>[ 0.645131] VUOTG_3.0V: 3000 mV
<6>[ 0.646095] VHSIC_1.0V: 1000 mV
<6>[ 0.647131] VHSIC_1.8V: 1800 mV
<6>[ 0.647841] 5M_CORE_1.5V: 1500 mV
<6>[ 0.648558] CAM_IO_1.8V: 1800 mV
<6>[ 0.649275] VT_CAM_1.8V: 1800 mV
<6>[ 0.649988] TA_CHECK_1.35V: 1350 mV
<6>[ 0.650701] TSP_AVDD_2.8V: 2800 mV
<6>[ 0.651425] CAM_AF_2.8V: 2800 mV
<6>[ 0.652439] VADC_3.3V: 3300 mV
<6>[ 0.653023] 32KHZ_PMIC:
<6>[ 0.653232] s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
<6>[ 0.653345] s3c-i2c s3c2440-i2c.5: slave address 0x10
<6>[ 0.653409] s3c-i2c s3c2440-i2c.5: bus frequency set to 378 KHz
<6>[ 0.653716] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
<6>[ 0.653782] s3c-i2c s3c2440-i2c.7: slave address 0x10
<6>[ 0.653893] s3c-i2c s3c2440-i2c.7: bus frequency set to 378 KHz
<6>[ 0.654090] s3c-i2c s3c2440-i2c.8: i2c-8: S3C I2C adapter
<6>[ 0.654205] s3c-i2c s3c2440-i2c.8: slave address 0x10
<6>[ 0.654269] s3c-i2c s3c2440-i2c.8: bus frequency set to 378 KHz
<6>[ 0.654440] Linux media interface: v0.10
<6>[ 0.654536] Linux video capture interface: v2.00
<6>[ 0.655923] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[ 0.656434] Bluetooth: Core ver 2.16
<6>[ 0.656531] NET: Registered protocol family 31
<6>[ 0.656642] Bluetooth: HCI device and connection manager initialized
<6>[ 0.656708] Bluetooth: HCI socket layer initialized
<6>[ 0.656819] Bluetooth: L2CAP socket layer initialized
<6>[ 0.656900] Bluetooth: SCO socket layer initialized
<6>[ 0.657235] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 0.657585] wake enabled for irq 421
<6>[ 0.657713] wake enabled for irq 422
<6>[ 0.658132] Switching to clocksource mct-frc
<6>[ 0.674534] NET: Registered protocol family 2
<6>[ 0.674769] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.675249] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
<6>[ 0.676348] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>[ 0.677473] TCP: Hash tables configured (established 65536 bind 65536)
<6>[ 0.677587] TCP: reno registered
<6>[ 0.677653] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[ 0.677778] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[ 0.678024] NET: Registered protocol family 1
<6>[ 0.678382] Trying to unpack rootfs image as initramfs...
<6>[ 0.704568] Freeing initrd memory: 560K
<6>[ 0.706006] Exynos5 : ARM Clock down on idle mode is enabled
<6>[ 0.706162] EXYNOS5250 ASV(ARM : 7 MIF : 3) using fused group
<6>[ 0.706552] [BT] bcm_bt_lpm_init
<6>[ 0.706811] wake enabled for irq 438
<6>[ 0.707184] exynos_tmu exynos_tmu: Current auto refresh interval(3875 nsec), Normal auto refresh interval(3875 nsec), memory throttle auto refresh internal(1937 nsec)
<6>[ 0.708368] exynos_tmu exynos_tmu: Tmu Initialization is sucessful...!
<3>[ 0.708592] s3c-adc samsung-adc-v4: operating without regulator "vdd" .
<6>[ 0.708716] s3c-adc samsung-adc-v4: attached adc driver
<6>[ 0.709256] audit: initializing netlink socket (disabled)
<5>[ 0.709348] type=2000 audit(0.700:1): initialized
<4>[ 0.710123] highmem bounce pool size: 64 pages
<6>[ 0.715641] fuse init (API version 7.18)
<7>[ 0.715935] SELinux: Registering netfilter hooks
<6>[ 0.717275] io scheduler noop registered
<6>[ 0.717343] io scheduler deadline registered
<6>[ 0.717537] io scheduler cfq registered (default)
<6>[ 0.920184] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
<6>[ 0.920258] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
<6>[ 0.922424] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
<6>[ 0.922544] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
<6>[ 0.923201] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
<6>[ 0.923348] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
<6>[ 0.923574] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 0.924257] exynos4210-uart.0: ttySAC0 at MMIO 0x12c00000 (irq = 83) is a S3C6400/10
<6>[ 0.924491] exynos4210-uart.1: ttySAC1 at MMIO 0x12c10000 (irq = 84) is a S3C6400/10
<6>[ 0.924673] exynos4210-uart.3: ttySAC3 at MMIO 0x12c30000 (irq = 86) is a S3C6400/10
<6>[ 0.925007] mali mali.0: Continuing without Mali clock control
<6>[ 0.926154] mali mali.0: GPU identified as 0x6956 r0p0 status 1
<6>[ 1.057213] mali mali.0: Probed as mali0
<4>[ 1.057490] mali mali.0: start latency exceeded, new value 875 ns
<4>[ 1.057767] mali mali.0: state restore latency exceeded, new value 208084 ns
<4>[ 1.057883] mali mali.0: stop latency exceeded, new value 875 ns
<6>[ 1.062661] brd: module loaded
<6>[ 1.065175] loop: module loaded
<6>[ 1.066014] WM1811 LDO1:
<6>[ 1.066501] WM1811 LDO2:
<6>[ 1.071007] wm8994 7-001a: WM1811 revision D CUST_ID 00
<6>[ 1.074950] bcm2079x-spi spi2.0: bcmspinfc_probe, probing bcmspinfc driver
<6>[ 1.075092] bcm2079x-spi spi2.0: requesting IRQ 430
<6>[ 1.075259] bcm2079x-spi spi2.0: bcmspinfc_probe, probing bcmspinfc driver exited successfully
<6>[ 1.075519] tun: Universal TUN/TAP device driver, 1.6
<6>[ 1.075584] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 1.075711] PPP generic driver version 2.4.2
<6>[ 1.075871] PPP BSD Compression module registered
<6>[ 1.075936] PPP Deflate Compression module registered
<6>[ 1.076319] PPP MPPE Compression module registered
<6>[ 1.076388] NET: Registered protocol family 24
<6>[ 1.076537] usbcore: registered new interface driver asix
<6>[ 1.076627] usbcore: registered new interface driver cdc_ether
<6>[ 1.076768] usbcore: registered new interface driver net1080
<6>[ 1.076858] usbcore: registered new interface driver cdc_subset
<6>[ 1.076994] usbcore: registered new interface driver zaurus
<6>[ 1.077095] usbcore: registered new interface driver cdc_ncm
<6>[ 1.077320] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.077643] s5p-ehci s5p-ehci: S5P EHCI Host Controller
<6>[ 1.077874] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
<6>[ 1.077990] s5p-ehci s5p-ehci: irq 103, io mem 0x12110000
<6>[ 1.083262] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
<6>[ 1.083396] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 1.083510] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 1.083575] usb usb1: Product: S5P EHCI Host Controller
<6>[ 1.083686] usb usb1: Manufacturer: Linux 3.4.67-g84ad5a4 ehci_hcd
<6>[ 1.083749] usb usb1: SerialNumber: s5p-ehci
<6>[ 1.084150] hub 1-0:1.0: USB hub found
<6>[ 1.084226] hub 1-0:1.0: 3 ports detected
<6>[ 1.084508] s5p-ehci s5p-ehci: remove, state 1
<6>[ 1.084627] usb usb1: USB disconnect, device number 1
<6>[ 1.085162] s5p-ehci s5p-ehci: USB bus 1 deregistered
<6>[ 1.085481] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 1.085751] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
<6>[ 1.085980] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 1
<6>[ 1.086125] exynos-ohci exynos-ohci: irq 103, io mem 0x12120000
<6>[ 1.142342] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
<6>[ 1.142459] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 1.142524] usb usb1: Product: EXYNOS OHCI Host Controller
<6>[ 1.142635] usb usb1: Manufacturer: Linux 3.4.67-g84ad5a4 ohci_hcd
<6>[ 1.142697] usb usb1: SerialNumber: exynos-ohci
<6>[ 1.143091] hub 1-0:1.0: USB hub found
<6>[ 1.143167] hub 1-0:1.0: 3 ports detected
<6>[ 1.143455] exynos-ohci exynos-ohci: remove, state 1
<6>[ 1.143573] usb usb1: USB disconnect, device number 1
<6>[ 1.144044] exynos-ohci exynos-ohci: USB bus 1 deregistered
<6>[ 1.144369] usbcore: registered new interface driver usblp
<6>[ 1.144433] Initializing USB Mass Storage driver...
<6>[ 1.144572] usbcore: registered new interface driver usb-storage
<6>[ 1.144635] USB Mass Storage support registered.
<6>[ 1.145010] s3c-hsotg : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
<6>[ 1.145017] s3c-hsotg : version 15 March 2009
<6>[ 1.145345] file system registered
<6>[ 1.146223] gadget: Mass Storage Function, version: 2009/09/11
<6>[ 1.146339] gadget: Number of LUNs=1
<6>[ 1.146405] lun0: LUN: removable file: (no medium)
<6>[ 1.146643] gadget: android_usb ready
<6>[ 1.146755] bound driver 'android_usb'
<6>[ 1.146932] mousedev: PS/2 mouse device common for all mice
<6>[ 1.147186] usbcore: registered new interface driver xpad
<6>[ 1.147326] usbcore: registered new interface driver usb_acecad
<6>[ 1.147414] usbcore: registered new interface driver aiptek
<6>[ 1.147552] usbcore: registered new interface driver gtco
<6>[ 1.147640] usbcore: registered new interface driver hanwang
<6>[ 1.147774] usbcore: registered new interface driver kbtab
<6>[ 1.147859] usbcore: registered new interface driver wacom
<6>[ 1.148396] input: Atmel maXTouch Touchscreen as /devices/platform/s3c2440-i2c.3/i2c-3/3-004a/input/input2
<4>[ 1.163421] mali mali.0: stop latency exceeded, new value 958 ns
<4>[ 1.163504] mali mali.0: state save latency exceeded, new value 7625 ns
<4>[ 1.163909] pd-g3d: Power-off latency exceeded, new value 287125 ns
<6>[ 1.258840] max77686-rtc max77686-rtc: max77686_rtc_enable_wtsr_smpl: WTSR: enable, SMPL: enable
<6>[ 1.358745] max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0
<6>[ 1.359331] i2c /dev entries driver
<6>[ 1.360017] exynos-mdev.0: Media0[0xde133400] was registered successfully
<6>[ 1.360203] exynos-mdev.1: Media1[0xde133800] was registered successfully
<6>[ 1.360347] exynos-mdev.2: Media2[0xde133c00] was registered successfully
<6>[ 1.360958] [INFO]gsc_probe:1450: gsc-0 registered successfully
<6>[ 1.361406] [INFO]gsc_probe:1450: gsc-1 registered successfully
<6>[ 1.361894] [INFO]gsc_probe:1450: gsc-2 registered successfully
<6>[ 1.362324] [INFO]gsc_probe:1450: gsc-3 registered successfully
<2>[ 1.362440] Initialize JPEG driver
<6>[ 1.362671] s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12
<6>[ 1.362844] s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11
<6>[ 1.363284] Samsung Graphics 2D driver, (c) 2011 Samsung Electronics
<6>[ 1.363392] EXYNOS MFC V4L2 Driver, (c) 2010 Samsung Electronics
<7>[ 1.363556] s5p_mfc_probe++
<7>[ 1.363566] s5p-mfc s5p-mfc: Initialised spin lock
<7>[ 1.363575] s5p-mfc s5p-mfc: Getting clocks
<6>[ 1.363817] s5p-mfc s5p-mfc: decoder registered as /dev/video6
<6>[ 1.363955] s5p-mfc s5p-mfc: encoder registered as /dev/video7
<7>[ 1.364382] s5p_mfc_probe--
<6>[ 1.364519] i2c i2c-0: attached exynos hdcp into i2c adapter successfully
<4>[ 1.364616] i2c-core: driver [exynos_hdcp] using legacy suspend method
<4>[ 1.364728] i2c-core: driver [exynos_hdcp] using legacy resume method
<6>[ 1.364805] Samsung HDMI output driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
<6>[ 1.365057] s5p-hdmi exynos5-hdmi: hdmiphy i2c bus number = 8
<6>[ 1.365248] s5p-hdmiphy 8-0038: hdmiphy_probe start
<6>[ 1.365315] s5p-hdmiphy 8-0038: probe successful
<6>[ 1.390901] s5p-hdmi exynos5-hdmi: probe sucessful
<6>[ 1.391121] i2c i2c-0: probed exynos edid
<6>[ 1.391228] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
<6>[ 1.391381] s5p-mixer s5p-mixer: probe start
<6>[ 1.391604] s5p-mixer s5p-mixer: resources acquired
<6>[ 1.391737] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'
<6>[ 1.391921] s5p-mixer s5p-mixer: registered layer mxr0_graph0 as /dev/video16
<6>[ 1.392107] s5p-mixer s5p-mixer: registered layer mxr0_graph1 as /dev/video17
<6>[ 1.392290] s5p-mixer s5p-mixer: registered layer mxr1_graph2 as /dev/video18
<6>[ 1.392427] s5p-mixer s5p-mixer: registered layer mxr1_graph3 as /dev/video19
<6>[ 1.392542] s5p-mixer s5p-mixer: mixer0 create links
<6>[ 1.392612] s5p-mixer s5p-mixer: mixer1 create links
<6>[ 1.392732] s5p-mixer s5p-mixer: mixer links are created successfully
<6>[ 1.392810] s5p-mixer s5p-mixer: probe successful
<6>[ 1.393953] fimc_is_spi successfully probed
<6>[ 1.394040] Driver for 1-wire Dallas network protocol.
<6>[ 1.466826] wake enabled for irq 420
<6>[ 1.467192] s3c2410_wdt: S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
<6>[ 1.467461] s3c2410-wdt s3c2410-wdt: starting watchdog timer
<6>[ 1.467532] s3c2410-wdt s3c2410-wdt: watchdog active, reset enabled, irq disabled
<6>[ 1.468044] device-mapper: uevent: version 1.0.3
<6>[ 1.468318] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>[ 1.468725] Bluetooth: HCI UART driver ver 2.2
<6>[ 1.468791] Bluetooth: HCI H4 protocol initialized
<6>[ 1.469000] cpuidle: using governor ladder
<6>[ 1.469197] cpuidle: using governor menu
<6>[ 1.469286] sdhci: Secure Digital Host Controller Interface driver
<6>[ 1.469398] sdhci: Copyright(c) Pierre Ossman
<6>[ 1.469549] Synopsys Designware Multimedia Card Interface Driver
<6>[ 1.469759] dw_mmc dw_mmc.0: Using internal DMA controller.
<6>[ 1.470133] mmc0: no vmmc regulator found
<6>[ 1.471945] dw_mmc dw_mmc.0: Version ID is 241a
<6>[ 1.472020] dw_mmc dw_mmc.0: DW MMC controller at irq 107, 32 bit host data width, 128 deep fifo
<6>[ 1.472220] dw_mmc dw_mmc.1: Using internal DMA controller.
<6>[ 1.472548] mmc1: no vmmc regulator found
<6>[ 1.473908] dw_mmc dw_mmc.1: Version ID is 241a
<6>[ 1.473977] dw_mmc dw_mmc.1: DW MMC controller at irq 108, 32 bit host data width, 128 deep fifo
<6>[ 1.474091] dw_mmc dw_mmc.1: Internal DMAC interrupt fix enabled.
<7>[ 1.479044] Registered led device: as3668
<6>[ 1.483544] usbcore: registered new interface driver usbhid
<6>[ 1.483717] usbhid: USB HID core driver
<4>[ 1.498257] mmc_host mmc0: device is being hw reset
<6>[ 1.658519] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
<6>[ 1.750930] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
<3>[ 1.751042] dw_mmc dw_mmc.0: cmd21 data error:-84 pending:184 status:a906 tcb:80 tbb:0
<6>[ 1.751594] mmc0: new HS200 MMC card at address 0001
<6>[ 1.752148] mmcblk0: mmc0:0001 MBG4GA 29.1 GiB
<6>[ 1.752407] mmcblk0boot0: mmc0:0001 MBG4GA partition 1 4.00 MiB
<6>[ 1.752664] mmcblk0boot1: mmc0:0001 MBG4GA partition 2 4.00 MiB
<6>[ 1.758020] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
<6>[ 1.759897] mmcblk0boot1: unknown partition table
<6>[ 1.760672] mmcblk0boot0: unknown partition table
<6>[ 1.839071] i2c i2c-1: MPU6050 is ready to go!
<6>[ 1.839388] bh1721fvc_i2c_probe: registering lightsensor-level input device
<6>[ 1.841117] ashmem: initialized
<6>[ 1.841389] Mobicore API module initialized!
<6>[ 1.842028] usbcore: registered new interface driver snd-usb-audio
<4>[ 1.843322] samsung-i2s samsung-i2s.0: start latency exceeded, new value 833 ns
<4>[ 1.843442] samsung-i2s samsung-i2s.0: state restore latency exceeded, new value 1042 ns
<4>[ 1.843558] samsung-i2s samsung-i2s.0: stop latency exceeded, new value 875 ns
<4>[ 1.843723] samsung-i2s samsung-i2s.0: state save latency exceeded, new value 958 ns
<4>[ 1.843999] pd-maudio: Power-off latency exceeded, new value 158417 ns
<4>[ 1.851441] pd-maudio: Power-on latency exceeded, new value 152792 ns
<4>[ 1.851514] samsung-i2s samsung-i2s.0: start latency exceeded, new value 917 ns
<6>[ 1.855075] asoc: wm8994-aif1 <-> samsung-i2s.0 mapping ok
<6>[ 1.855416] asoc: wm8994-aif1 <-> samsung-i2s.4 mapping ok
<6>[ 1.855788] asoc: wm8994-aif2 <-> manta-voice mapping ok
<6>[ 1.856101] asoc: wm8994-aif3 <-> manta-bt mapping ok
<6>[ 1.881154] input: Manta-I2S Headset as /devices/platform/manta-i2s/sound/card0/input3
<6>[ 1.882541] asoc: dit-hifi <-> samsung-spdif mapping ok
<6>[ 1.883066] GACT probability NOT on
<6>[ 1.883135] Mirror/redirect action on
<6>[ 1.883277] u32 classifier
<6>[ 1.883339] Actions configured
<6>[ 1.883402] Netfilter messages via NETLINK v0.30.
<6>[ 1.883555] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<6>[ 1.884018] ctnetlink v0.93: registering with nfnetlink.
<6>[ 1.884163] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 1.884227] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 1.884556] xt_time: kernel timezone is -0000
<6>[ 1.884950] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 1.885235] arp_tables: (C) 2002 David S. Miller
<6>[ 1.885336] TCP: cubic registered
<6>[ 1.885398] Initializing XFRM netlink socket
<6>[ 1.886005] NET: Registered protocol family 10
<6>[ 1.886750] Mobile IPv6
<6>[ 1.886840] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 1.887072] IPv6 over IPv4 tunneling driver
<6>[ 1.887961] NET: Registered protocol family 17
<6>[ 1.888048] NET: Registered protocol family 15
<6>[ 1.888308] Bluetooth: RFCOMM TTY layer initialized
<6>[ 1.888387] Bluetooth: RFCOMM socket layer initialized
<6>[ 1.888500] Bluetooth: RFCOMM ver 1.11
<6>[ 1.888562] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 1.888674] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 1.888799] NET: Registered protocol family 35
<5>[ 1.889198] Registering SWP/SWPB emulation handler
<4>[ 1.889375] pd-gscl3: Power-off latency exceeded, new value 875 ns
<4>[ 1.889483] pd-isp: Power-off latency exceeded, new value 135333 ns
<4>[ 1.889604] pd-gscl2: Power-off latency exceeded, new value 750 ns
<4>[ 1.889685] pd-gscl1: Power-off latency exceeded, new value 666 ns
<4>[ 1.889815] pd-gscl0: Power-off latency exceeded, new value 709 ns
<4>[ 1.889996] pd-dp: Power-off latency exceeded, new value 833 ns
<4>[ 1.890098] pd-gscl: Power-off latency exceeded, new value 166000 ns
<4>[ 1.890228] pd-mixer: Power-off latency exceeded, new value 750 ns
<4>[ 1.890311] pd-hdmi: Power-off latency exceeded, new value 750 ns
<4>[ 1.890439] pd-fimd1: Power-off latency exceeded, new value 750 ns
<4>[ 1.890668] pd-disp1: Power-off latency exceeded, new value 158458 ns
<4>[ 1.890810] pd-mfc: Power-off latency exceeded, new value 234459 ns
<6>[ 1.891203] wake enabled for irq 424
<6>[ 1.891470] wake enabled for irq 426
<6>[ 2.118823] battery: charge source type was changed: usb
<4>[ 2.125253] pd-disp1: Power-on latency exceeded, new value 190250 ns
<4>[ 2.125326] pd-fimd1: Power-on latency exceeded, new value 875 ns
<4>[ 2.125444] s3c-fb exynos5-fb.1: start latency exceeded, new value 875 ns
<4>[ 2.125521] s3c-fb exynos5-fb.1: state restore latency exceeded, new value 10542 ns
<4>[ 2.125636] s3c-fb exynos5-fb.1: stop latency exceeded, new value 958 ns
<6>[ 2.159121] s3c-fb exynos5-fb.1: window 0: fb
<4>[ 2.159507] pd-dp: Power-on latency exceeded, new value 958 ns
<4>[ 2.159578] s5p-dp s5p-dp: start latency exceeded, new value 875 ns
<4>[ 2.159693] s5p-dp s5p-dp: state restore latency exceeded, new value 1084 ns
<4>[ 2.159808] s5p-dp s5p-dp: stop latency exceeded, new value 833 ns
<6>[ 2.161483] s5p-dp s5p-dp: EDID data does not include any extensions.
<3>[ 2.174365] s5p-dp s5p-dp: EDID Read success!
<6>[ 2.186949] s5p-dp s5p-dp: Link Training Clock Recovery success
<6>[ 2.203464] s5p-dp s5p-dp: Link Training success!
<4>[ 2.352720] wifi_set_power = 1
<4>[ 2.708293] wifi_set_carddetect = 1
<6>[ 2.738293] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
<6>[ 2.748993] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
<3>[ 2.749225] dw_mmc dw_mmc.1: cmd19 data error:-84 pending:84 status:9906 tcb:40 tbb:0
<6>[ 2.751816] mmc1: new ultra high speed SDR104 SDIO card at address 0001
<4>[ 2.755968] F1 signature OK, socitype:0x1 chip:0x4324 rev:0x2 pkg:0xd
<4>[ 2.756563] DHD: dongle ram size is set to 589824(orig 589824) at 0x0
<4>[ 2.757665] wl_create_event_handler(): thread:wl_event_handler:60 started
<6>[ 2.757685] CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xddc413d8
<4>[ 2.758484] p2p0: P2P Interface Registered
<4>[ 2.758647] dhd_attach(): thread:dhd_watchdog_thread:61 started
<4>[ 2.758851] dhd_attach(): thread:dhd_dpc:62 started
<4>[ 2.759005] dhd_attach(): thread:dhd_rxf:63 started
<4>[ 2.759205] dhd_attach(): thread:dhd_sysioc:64 started
<4>[ 2.759390] wifi_get_mac_addr
<4>[ 2.759882] Broadcom Dongle Host Driver: register interface [wlan0] MAC: a8:06:00:c5:16:21
<4>[ 2.760042]
<4>[ 2.760045] Dongle Host Driver, version 1.88.45 (r)
<4>[ 2.760049] Compiled in drivers/net/wireless/bcmdhd on Nov 13 2015 at 21:32:21
<4>[ 2.760275] wifi_set_power = 0
<4>[ 2.868271] =========== WLAN placed in RESET ========
<6>[ 2.893702] max77686-rtc max77686-rtc: setting system clock to 2018-01-05 02:31:36 UTC (1515119496)
<6>[ 2.896328] ALSA device list:
<6>[ 2.896406] #0: Manta-I2S
<6>[ 2.896479] #1: Manta-SPDIF
<6>[ 2.896937] Freeing init memory: 256K
<6>[ 2.897014] Write protecting the kernel text section c0008000 - c084d000
<6>[ 2.897527] rodata_test: attempting to write to read-only section:
<6>[ 2.897606] write to read-only section trapped, success
<7>[ 2.904341] SELinux: 2048 avtab hash slots, 4194 rules.
<7>[ 2.906510] SELinux: 2048 avtab hash slots, 4194 rules.
<7>[ 2.906544] SELinux: 1 users, 2 roles, 361 types, 0 bools, 1 sens, 1024 cats
<7>[ 2.906563] SELinux: 86 classes, 4194 rules
<7>[ 2.907853] SELinux: Completing initialization.
<7>[ 2.907864] SELinux: Setting up existing superblocks.
<7>[ 2.907888] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<7>[ 2.907913] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>[ 2.908008] SELinux: initialized (dev bdev, type bdev), not configured for labeling
<7>[ 2.908030] SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>[ 2.908061] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 2.908089] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<7>[ 2.912640] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>[ 2.912666] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>[ 2.912686] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
<7>[ 2.912710] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>[ 2.912743] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>[ 2.912860] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 2.912907] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<5>[ 3.037015] type=1403 audit(1515119496.635:2): policy loaded auid=4294967295 ses=4294967295
<5>[ 3.039339] type=1404 audit(1515119496.640:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
<3>[ 3.378694] init: /dev/hw_random not found
<6>[ 3.378788] keychord: using input dev manta-keypad for fevent
<6>[ 3.378869] keychord: using input dev Manta-I2S Headset for fevent
<7>[ 3.398348] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>[ 3.398616] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 3.418355] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>[ 3.419842] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 3.419989] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 3.443338] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<3>[ 3.444911] init: /dev/hw_random not found
<6>[ 3.448380] EXT4-fs (mmcblk0p8): mounted filesystem without journal. Opts: (null)
<7>[ 3.448476] SELinux: initialized (dev mmcblk0p8, type ext4), uses xattr
<6>[ 3.448539] fs_mgr: __mount(source=/dev/block/platform/dw_mmc.0/by-name/system,target=/system,type=ext4)=0
<6>[ 3.460008] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[ 3.460098] SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
<6>[ 3.460137] fs_mgr: check_fs(): mount(/dev/block/platform/dw_mmc.0/by-name/cache,/cache,ext4)=0
<6>[ 3.488819] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/dw_mmc.0/by-name/cache
<6>[ 3.508870] atmel_mxt_ts 3-004a: Skip writing Config:[CRC 0x997F60]
<6>[ 3.520916] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<6>[ 3.521128] e2fsck: /dev/block/platform/dw_mmc.0/by-name/cache: clean, 30/33840 files, 4429/135168 blocks
<6>[ 3.526137] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
<7>[ 3.526261] SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
<6>[ 3.526328] fs_mgr: __mount(source=/dev/block/platform/dw_mmc.0/by-name/cache,target=/cache,type=ext4)=0
<7>[ 3.534406] EXT4-fs (mmcblk0p9): ext4_orphan_cleanup: deleting unreferenced inode 57345
<7>[ 3.534908] EXT4-fs (mmcblk0p9): ext4_orphan_cleanup: deleting unreferenced inode 57347
<7>[ 3.537789] EXT4-fs (mmcblk0p9): ext4_orphan_cleanup: deleting unreferenced inode 49616
<6>[ 3.538405] EXT4-fs (mmcblk0p9): 3 orphan inodes deleted
<6>[ 3.538573] EXT4-fs (mmcblk0p9): recovery complete
<6>[ 3.562483] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[ 3.562576] SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
<6>[ 3.562626] fs_mgr: check_fs(): mount(/dev/block/platform/dw_mmc.0/by-name/userdata,/data,ext4)=0
<6>[ 3.583310] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/dw_mmc.0/by-name/userdata
<6>[ 3.615114] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<6>[ 3.615196] e2fsck: /dev/block/platform/dw_mmc.0/by-name/userdata: clean, 1301/1818624 files, 298646/7271424 blocks
<6>[ 3.620984] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
<7>[ 3.621104] SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
<6>[ 3.621174] fs_mgr: __mount(source=/dev/block/platform/dw_mmc.0/by-name/userdata,target=/data,type=ext4)=0
<6>[ 3.626330] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
<7>[ 3.626442] SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
<6>[ 3.626496] fs_mgr: __mount(source=/dev/block/platform/dw_mmc.0/by-name/efs,target=/factory,type=ext4)=0
<6>[ 3.628311] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
<7>[ 3.633054] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
<4>[ 3.683370] pd-g3d: Power-on latency exceeded, new value 1208708 ns
<4>[ 3.683546] mali mali.0: start latency exceeded, new value 1000 ns
<6>[ 3.685006] binder: 122:122 transaction failed 29189, size 0-0
<4>[ 3.686280] mali mali.0: state restore latency exceeded, new value 2670167 ns
<3>[ 3.688026] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
<3>[ 3.688131] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
<3>[ 3.694512] android_usb: already disabled
<7>[ 3.712296] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
<6>[ 3.712515] read descriptors
<6>[ 3.712571] read strings
<6>[ 3.712639] mtp_bind_config
<38>[ 3.743754] logd.auditd: start
<4>[ 3.783305] mali mali.0: state save latency exceeded, new value 11875 ns
<6>[ 3.843712] atmel_mxt_ts 3-004a: Family ID: 162 Variant ID: 0 Version: 18 Build: 170
<6>[ 3.843802] atmel_mxt_ts 3-004a: Matrix X Size: 32 Matrix Y Size: 52 Object Num: 29
<6>[ 3.852393] atmel_mxt_ts 3-004a: Mxt touch controller initialized
<4>[ 4.397617] ------------[ cut here ]------------
<4>[ 4.397711] WARNING: at /usr/local/google/buildbot/src/partner-android/l-mr1-dev-exynos-manta-3.4/private/manta/drivers/gpu/arm/midgard/mali_kbase_jd.c:228 jd_submit_atom+0x8fc/0xa08()
<4>[ 4.397792] sg list from dma_buf_map_attachment > dma_buf->size=16404480
<4>[ 4.397873] Backtrace:
<4>[ 4.397971] [<c0012d0c>] (dump_backtrace+0x0/0x10c) from [<c064f0e8>] (dump_stack+0x18/0x1c)
<4>[ 4.398053] r6:c0294af4 r5:00000009 r4:dd545b50 r3:c08d902c
<4>[ 4.398304] [<c064f0d0>] (dump_stack+0x0/0x1c) from [<c0037278>] (warn_slowpath_common+0x50/0x68)
<4>[ 4.398387] [<c0037228>] (warn_slowpath_common+0x0/0x68) from [<c00372fc>] (warn_slowpath_fmt+0x38/0x40)
<4>[ 4.398468] r8:dd810780 r7:ddedf9f0 r6:00000fa5 r5:c09158cd r4:0000000f
<4>[ 4.398674] r3:00000009
<4>[ 4.398835] [<c00372c4>] (warn_slowpath_fmt+0x0/0x40) from [<c0294af4>] (jd_submit_atom+0x8fc/0xa08)
<4>[ 4.398880] r3:00fa5000 r2:c07c4d18
<4>[ 4.399041] [<c02941f8>] (jd_submit_atom+0x0/0xa08) from [<c0294e84>] (kbase_jd_submit+0x284/0x388)
<4>[ 4.399126] [<c0294c00>] (kbase_jd_submit+0x0/0x388) from [<c02a40b8>] (kbase_ioctl+0x680/0xb24)
<4>[ 4.399176] [<c02a3a38>] (kbase_ioctl+0x0/0xb24) from [<c0126a8c>] (do_vfs_ioctl+0x8c/0x5b4)
<4>[ 4.399260] [<c0126a00>] (do_vfs_ioctl+0x0/0x5b4) from [<c0127028>] (sys_ioctl+0x74/0x84)
<4>[ 4.399345] [<c0126fb4>] (sys_ioctl+0x0/0x84) from [<c000f040>] (ret_fast_syscall+0x0/0x30)
<4>[ 4.399425] r8:c000f1c4 r7:00000036 r6:b8196f14 r5:b81916a8 r4:0000021c
<4>[ 4.399675] Board Information: Manta HW revision: 8, CPU EXYNOS5250 Rev1.0
<4>[ 4.399758] ---[ end trace cec3b4ab4bca449c ]---
<4>[ 4.400125] mali mali.0: start latency exceeded, new value 1291 ns
<4>[ 4.687205] healthd: BatteryHealthPath not found
<4>[ 4.687263] healthd: BatteryPresentPath not found
<6>[ 4.709623] manta_otg manta_otg_work: UNDEFINED -> b_peripheral
<4>[ 4.748291] mali mali.0: state save latency exceeded, new value 15500 ns
<6>[ 4.980962] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 5.050761] android_usb gadget: high-speed config #1: android
<6>[ 5.050994] android_work: sent uevent USB_STATE=CONFIGURED
<7>[ 5.059719] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<4>[ 5.233281] mali mali.0: stop latency exceeded, new value 1000 ns
<4>[ 5.233397] mali mali.0: state save latency exceeded, new value 21791 ns
<6>[ 6.461161] warning: `main' uses 32-bit capabilities (legacy support in use)
<6>[ 7.723818] SEC_DRIVER_2.1_2012.10.24
<6>[ 7.838493] iio-buffer, current state requested again
<6>[ 8.128687] inv_mpu_iio: firmware loaded CRC=0xd37d4599
<6>[ 8.129658] iio-buffer, current state requested again
<36>[ 11.474707] type=1400 audit(1515119505.070:4): avc: denied { getattr } for pid=408 comm="system_server" path="/data/app/tlcd_sock" dev="mmcblk0p9" ino=278530 scontext=u:r:system_server:s0 tcontext=u:object_r:drmserver_socket:s0 tclass=sock_file permissive=0
<6>[ 11.664664] healthd-manta: battery charge enable=1
<4>[ 11.671515] healthd: battery l=100 v=3943 t=28.0 h=2 st=2 c=-1035 chg=u
<6>[ 13.460858] acc_open
<6>[ 13.460958] acc_release
<4>[ 14.475508]
<4>[ 14.475512] Dongle Host Driver, version 1.88.45 (r)
<4>[ 14.475516] Compiled in drivers/net/wireless/bcmdhd on Nov 13 2015 at 21:32:21
<4>[ 14.475680] wl_android_wifi_on in
<4>[ 14.475730] wifi_set_power = 1
<6>[ 14.646868] mtp_open
<6>[ 15.168536] +++fimc_is_sensor_open()
<6>[ 15.168587] ---fimc_is_sensor_open(0)
<6>[ 15.266574] +++fimc_is_ischain_open()
<6>[ 15.364256] fimc_is_fw2.bin version : 2 2869-2012/11/14 16:57:59]O05L00AFK01
<6>[ 15.364835] firmware is loaded successfully from fimc_is_fw2.bin
<6>[ 15.365480] fimc_is_ischain_power(1)
<4>[ 15.365863] pd-gscl: Power-on latency exceeded, new value 312250 ns
<4>[ 15.366300] pd-isp: Power-on latency exceeded, new value 338166 ns
<4>[ 15.366364] exynos5-fimc-is2 exynos5-fimc-is2: start latency exceeded, new value 833 ns
<6>[ 15.366448] FIMC_IS runtime resume
<4>[ 15.376597] exynos5-fimc-is2 exynos5-fimc-is2: state restore latency exceeded, new value 10144250 ns
<4>[ 15.376687] exynos5-fimc-is2 exynos5-fimc-is2: stop latency exceeded, new value 1125 ns
<4>[ 15.376786] exynos5-fimc-is2 exynos5-fimc-is2: start latency exceeded, new value 875 ns
<6>[ 15.377257] Manufacturer ID : 0x000000ef
<6>[ 15.377305] Device ID : 0x00000013
<6>[ 15.381340] sensor name : 4E5
<6>[ 15.381426] FROM DATA(0x1A): 0x0000000c
<6>[ 15.381469] FROM DATA(0x1B): 0x00000001
<6>[ 15.381555] ---fimc_is_ischain_open(0)
<6>[ 15.391189] IS version : 111.130
<6>[ 15.500177] setfile_4e5.bin version : 4E5_121115_V3 2012/11/15/15:57 E5250
<6>[ 15.500283] setfile is loaded successfully from setfile_4e5.bin
<4>[ 15.583277] =========== WLAN going back to live ========
<4>[ 15.583370] sdio_reset_comm():
<3>[ 15.586505] dw_mmc dw_mmc.1: Actual clock is high than a reqeust clock.Source clock is needed to change
<6>[ 15.586602] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 98040Hz, actual 98039HZ div = 255)
<6>[ 15.599916] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
<4>[ 15.736766] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<4>[ 15.819251] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
<6>[ 15.819667] wake enabled for irq 437
<4>[ 15.820788] wifi_get_mac_addr
<4>[ 15.822767] Firmware up: op_mode=0x0015, Broadcom Dongle Host Driver mac=a8:06:00:c5:16:21
<4>[ 15.831719] Firmware version = wl0: Sep 9 2014 10:45:13 version 6.10.197.41.200.16 (r501551) FWID 01-9b3a9b32
<4>[ 15.832155] dhd_wlfc_init(): successfully enabled bdcv2 tlv signaling, 79
<6>[ 15.833423] CFG80211-ERROR) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=aa:06:00:c5:16:21
<4>[ 16.081843] dhd_set_suspend: Remove extra suspend setting
<3>[ 16.608455] ERR:fimc_is_flite_stop:920: last capture timeout:fimc_is_flite_stop
<3>[ 16.608489]
<3>[ 16.673454] ERR:fimc_is_sensor_back_stop:649: fimc_is_flite_stop is fail
<3>[ 16.683873] ERR:fimc_is_video_streamoff:411: vb2_streamoff is failed(-22)
<4>[ 16.684632] fimc_is_sensor_front_stop:726: already front stop
<6>[ 16.697530] fimc_is_bayer_video_close
<6>[ 16.697605] +++fimc_is_sensor_close
<4>[ 16.697722] fimc_is_sensor_back_stop:640: already back stop
<4>[ 16.697792] fimc_is_sensor_front_stop:726: already front stop
<6>[ 16.697911] ---fimc_is_sensor_close(0)
<6>[ 16.697998] fimc_is_isp_video_close
<6>[ 16.698066] +++fimc_is_ischain_close
<4>[ 16.698182] fimc_is_ischain_isp_stop:3120: already stop
<6>[ 16.797496] fimc_is_ischain_power(0)
<6>[ 16.797582] FIMC_IS runtime suspend
<4>[ 16.805306] exynos5-fimc-is2 exynos5-fimc-is2: state save latency exceeded, new value 7715542 ns
<4>[ 16.805530] pd-isp: Power-off latency exceeded, new value 144708 ns
<6>[ 16.809235] ---fimc_is_ischain_close(0)
<6>[ 16.809370] fimc_is_scalerc_video_close
<6>[ 16.809526] fimc_is_scalerp_video_close
<4>[ 16.810342] pd-gscl: Power-off latency exceeded, new value 337042 ns
<6>[ 16.864723] +++fimc_is_sensor_open()
<6>[ 16.864809] ---fimc_is_sensor_open(0)
<6>[ 16.880452] +++fimc_is_ischain_open()
<6>[ 16.947743] fimc_is_fw2.bin version : 2 2869-2012/11/14 16:57:59]O05L00AFK01
<6>[ 16.948042] firmware is loaded successfully from fimc_is_fw2.bin
<6>[ 16.948983] fimc_is_ischain_power(1)
<4>[ 16.949639] pd-isp: Power-on latency exceeded, new value 353334 ns
<6>[ 16.949734] FIMC_IS runtime resume
<4>[ 16.962189] exynos5-fimc-is2 exynos5-fimc-is2: state restore latency exceeded, new value 12449875 ns
<6>[ 16.962401] Manufacturer ID : 0x000000ef
<6>[ 16.962451] Device ID : 0x00000013
<6>[ 16.964207] sensor name : 6A3
<6>[ 16.964297] FROM DATA(0x1A): 0x00000000
<6>[ 16.964346] FROM DATA(0x1B): 0x00000000
<6>[ 16.964429] ---fimc_is_ischain_open(0)
<6>[ 16.973921] IS version : 111.130
<6>[ 17.008461] setfile_6a3.bin version : 1.23 2012/11/15/17:42 E5250
<6>[ 17.008534] setfile is loaded successfully from setfile_6a3.bin
<3>[ 18.015054] ERR:fimc_is_flite_stop:920: last capture timeout:fimc_is_flite_stop
<3>[ 18.015059]
<3>[ 18.078278] ERR:fimc_is_sensor_back_stop:649: fimc_is_flite_stop is fail
<3>[ 18.078972] ERR:fimc_is_video_streamoff:411: vb2_streamoff is failed(-22)
<4>[ 18.079136] fimc_is_sensor_front_stop:726: already front stop
<6>[ 18.081333] fimc_is_bayer_video_close
<6>[ 18.081436] +++fimc_is_sensor_close
<4>[ 18.081483] fimc_is_sensor_back_stop:640: already back stop
<4>[ 18.081531] fimc_is_sensor_front_stop:726: already front stop
<6>[ 18.081611] ---fimc_is_sensor_close(0)
<6>[ 18.081670] fimc_is_isp_video_close
<6>[ 18.081749] +++fimc_is_ischain_close
<4>[ 18.081792] fimc_is_ischain_isp_stop:3120: already stop
<6>[ 18.082864] fimc_is_ischain_power(0)
<6>[ 18.082956] FIMC_IS runtime suspend
<6>[ 18.090324] ---fimc_is_ischain_close(0)
<6>[ 18.090387] fimc_is_scalerc_video_close
<6>[ 18.090471] fimc_is_scalerp_video_close
<4>[ 18.091630] pd-gscl: Power-off latency exceeded, new value 921042 ns
<6>[ 18.628420] iio-buffer, current state requested again
<4>[ 22.713528] mali mali.0: stop latency exceeded, new value 2542 ns
<4>[ 22.714073] mali mali.0: start latency exceeded, new value 2084 ns
<4>[ 22.714417] mali mali.0: state save latency exceeded, new value 42333 ns
<4>[ 22.718883] mali mali.0: start latency exceeded, new value 2250 ns
<4>[ 22.722110] mali mali.0: state restore latency exceeded, new value 2859752 ns
<4>[ 22.824251] mali mali.0: state save latency exceeded, new value 853625 ns
<4>[ 23.244767] mali mali.0: state save latency exceeded, new value 1255959 ns
<4>[ 23.454796] mali mali.0: state save latency exceeded, new value 1336621 ns
<6>[ 25.701205] binder: 842:1473 transaction failed 29189, size 168-0
<7>[ 25.998250] p2p0: no IPv6 routers present
<4>[ 26.899179] samsung-i2s samsung-i2s.0: state restore latency exceeded, new value 1375 ns
<3>[ 26.903177] wm8994-codec wm8994-codec: FIFO error
<4>[ 28.506014] wl_bss_connect_done succeeded with 18:64:72:df:03:61
<4>[ 28.581497] dhd_ndo_add_ip: ndo ipaddr entry added
<4>[ 28.605427] wl_bss_connect_done succeeded with 18:64:72:df:03:61
<4>[ 28.679788] dhd_set_suspend: Remove extra suspend setting
<4>[ 28.688068] dhd_pno_get_for_batch : wifi location service is not supported
<4>[ 28.688203] failed to getting batching results
<4>[ 28.688761] dhd_pno_stop_for_batch : wifi location service is not supported
<4>[ 28.688891] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL
<4>[ 28.689012] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL
<4>[ 28.689085] failed to stop batching scan
<4>[ 29.149839] mali mali.0: state save latency exceeded, new value 1377041 ns
<4>[ 29.535235] dhd_ndo_add_ip: ndo ipaddr entry added
<4>[ 29.536485] dhd_ndo_add_ip: ndo ipaddr entry added
<4>[ 29.658870] pd-g3d: Power-off latency exceeded, new value 476292 ns
Reference in new issue View Git Blame Copy Permalink