jianglk.darker
7ee447c011
|
4 months ago | |
|---|---|---|
| .. | ||
| Android.bp | 4 months ago | |
| README.md | 4 months ago | |
| ese_relay.c | 4 months ago | |
| ese_relay_fake.c | 4 months ago | |
| ese_relay_pn80t_nq_nci.c | 4 months ago | |
| ese_relay_pn80t_spidev.c | 4 months ago | |
README.md
What?
ese-relay connects libese's functionality to a local abstract socket on an Android device. The primary purpose is to ease development and provision with test hardware without bringing up all the development tools needed.
ese-relay uses the same wire protocol as the Virtual Smart Card project by acting as the "viccd" service. This enables use of any tool that supports pcsc-lite without any additional development.
Wire protocol
The format is always Ln d0..dn Ln is a network byte order 16-bit unsigned integer length of the data. d0..dn are uint8_t bytes to tunneled directly to/from the card.
If Ln == 1, it indicates an out of band control message. Supported messages are 1:0 - 1:4:
- 0: Power off (ignored)
- 1: Power on (implemented with a reset)
- 3: Reset
- 4: ATR - returns a fake ATR
Prerequisites
- pcscd is installed on your system.
- Build and install https://frankmorgner.github.io/vsmartcard/virtualsmartcard
- Configure /etc/reader.d/vpcd as below.
- Build ese-relay configured for the hardware in use.
/etc/reader.conf.d/vpcd:
FRIENDLYNAME "Virtual PCD"
DEVICENAME localhost:0x1000
LIBPATH /usr/lib/pcsc/drivers/serial/libifdvpcd.so
CHANNELID 0x1000
This will cause pcscd to connect to localhost port 4096 on start as per the vsmartcard documentation.
Usage
In one terminal, run the service and forward the abstract UNIX socket to a local TCP socket:
$ adb shell ese-relay- $ adb forward tcp:4096 localabstract:ese-relay
In another terminal, restart pcscd configured with an appropriate reader:
$ /etc/init.d/pcscd restart # (Or whatever your init system requires.)
In yet another terminal, use your preferred* pcsc client:
$ java -jar gp.jar -info
- https://github.com/martinpaljak/GlobalPlatformPro is used here.