You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

429 lines
12 KiB

/*
* Copyright (c) 2013 Ben Noordhuis <info@bnoordhuis.nl>
* Copyright (c) 2013-2015 Dmitry V. Levin <ldv@altlinux.org>
* Copyright (c) 2016 Eugene Syromyatnikov <evgsyr@gmail.com>
* Copyright (c) 2015-2018 The strace developers.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "defs.h"
#include "perf_event_struct.h"
#include "print_fields.h"
#include "xlat/hw_breakpoint_len.h"
#include "xlat/hw_breakpoint_type.h"
#include "xlat/perf_attr_size.h"
#include "xlat/perf_branch_sample_type.h"
#include "xlat/perf_event_open_flags.h"
#include "xlat/perf_event_read_format.h"
#include "xlat/perf_event_sample_format.h"
#include "xlat/perf_hw_cache_id.h"
#include "xlat/perf_hw_cache_op_id.h"
#include "xlat/perf_hw_cache_op_result_id.h"
#include "xlat/perf_hw_id.h"
#include "xlat/perf_sw_ids.h"
#include "xlat/perf_type_id.h"
struct pea_desc {
struct perf_event_attr *attr;
uint32_t size;
};
static void
free_pea_desc(void *pea_desc_ptr)
{
struct pea_desc *desc = pea_desc_ptr;
free(desc->attr);
free(desc);
}
int
fetch_perf_event_attr(struct tcb *const tcp, const kernel_ulong_t addr)
{
struct pea_desc *desc;
struct perf_event_attr *attr;
uint32_t size;
if (umove(tcp, addr + offsetof(struct perf_event_attr, size), &size)) {
printaddr(addr);
return 1;
}
if (size > sizeof(*attr))
size = sizeof(*attr);
if (!size)
size = PERF_ATTR_SIZE_VER0;
/*
* Kernel (rightfully) deems invalid attribute structures with size less
* than first published format size, and we do the same.
*/
if (size < PERF_ATTR_SIZE_VER0) {
printaddr(addr);
return 1;
}
if (abbrev(tcp))
size = offsetofend(struct perf_event_attr, config);
/* Size should be multiple of 8, but kernel doesn't check for it */
/* size &= ~7; */
attr = xcalloc(1, sizeof(*attr));
if (umoven_or_printaddr(tcp, addr, size, attr)) {
free(attr);
return 1;
}
desc = xmalloc(sizeof(*desc));
desc->attr = attr;
desc->size = size;
set_tcb_priv_data(tcp, desc, free_pea_desc);
return 0;
}
void
print_perf_event_attr(struct tcb *const tcp, const kernel_ulong_t addr)
{
static const char *precise_ip_desc[] = {
"arbitrary skid",
"constant skid",
"requested to have 0 skid",
"must have 0 skid",
};
struct pea_desc *desc;
struct perf_event_attr *attr;
uint32_t size;
uint32_t new_size;
int use_new_size = 0;
/*
* Amusingly, kernel accepts structures with only part of the field
* present, so we making check like this (instead of checking
* offsetofend against size) in order to print fields as kernel sees
* them. This also should work great on big endian architectures.
*/
#define _PERF_CHECK_FIELD(_field) \
do { \
if (offsetof(struct perf_event_attr, _field) >= size) \
goto print_perf_event_attr_out; \
} while (0)
desc = get_tcb_priv_data(tcp);
attr = desc->attr;
size = desc->size;
/* The only error which expected to change size field currently */
if (tcp->u_error == E2BIG) {
if (umove(tcp, addr + offsetof(struct perf_event_attr, size),
&new_size))
use_new_size = -1;
else
use_new_size = 1;
}
PRINT_FIELD_XVAL("{", *attr, type, perf_type_id, "PERF_TYPE_???");
PRINT_FIELD_XVAL(", ", *attr, size, perf_attr_size,
"PERF_ATTR_SIZE_???");
if (use_new_size) {
tprints(" => ");
if (use_new_size > 0)
printxval(perf_attr_size, new_size,
"PERF_ATTR_SIZE_???");
else
tprints("???");
}
switch (attr->type) {
case PERF_TYPE_HARDWARE:
PRINT_FIELD_XVAL(", ", *attr, config, perf_hw_id,
"PERF_COUNT_HW_???");
break;
case PERF_TYPE_SOFTWARE:
PRINT_FIELD_XVAL(", ", *attr, config, perf_sw_ids,
"PERF_COUNT_SW_???");
break;
case PERF_TYPE_TRACEPOINT:
/*
* "The value to use in config can be obtained from under
* debugfs tracing/events/../../id if ftrace is enabled
* in the kernel."
*/
PRINT_FIELD_U(", ", *attr, config);
break;
case PERF_TYPE_HW_CACHE:
/*
* (perf_hw_cache_id) | (perf_hw_cache_op_id << 8) |
* (perf_hw_cache_op_result_id << 16)
*/
tprints(", config=");
printxval(perf_hw_cache_id, attr->config & 0xFF,
"PERF_COUNT_HW_CACHE_???");
tprints("|");
printxval(perf_hw_cache_op_id, (attr->config >> 8) & 0xFF,
"PERF_COUNT_HW_CACHE_OP_???");
tprints("<<8|");
/*
* Current code (see set_ext_hw_attr in arch/x86/events/core.c,
* tile_map_cache_event in arch/tile/kernel/perf_event.c,
* arc_pmu_cache_event in arch/arc/kernel/perf_event.c,
* hw_perf_cache_event in arch/blackfin/kernel/perf_event.c,
* _hw_perf_cache_event in arch/metag/kernel/perf/perf_event.c,
* mipspmu_map_cache_event in arch/mips/kernel/perf_event_mipsxx.c,
* hw_perf_cache_event in arch/powerpc/perf/core-book3s.c,
* hw_perf_cache_event in arch/powerpc/perf/core-fsl-emb.c,
* hw_perf_cache_event in arch/sh/kernel/perf_event.c,
* sparc_map_cache_event in arch/sparc/kernel/perf_event.c,
* xtensa_pmu_cache_event in arch/xtensa/kernel/perf_event.c,
* armpmu_map_cache_event in drivers/perf/arm_pmu.c) assumes
* that cache result is 8 bits in size.
*/
printxval(perf_hw_cache_op_result_id,
(attr->config >> 16) & 0xFF,
"PERF_COUNT_HW_CACHE_RESULT_???");
tprints("<<16");
if (attr->config >> 24) {
tprintf("|%#" PRIx64 "<<24", attr->config >> 24);
tprints_comment("PERF_COUNT_HW_CACHE_???");
}
break;
case PERF_TYPE_RAW:
/*
* "If type is PERF_TYPE_RAW, then a custom "raw" config
* value is needed. Most CPUs support events that are not
* covered by the "generalized" events. These are
* implementation defined; see your CPU manual (for example the
* Intel Volume 3B documentation or the AMD BIOS and Kernel
* Developer Guide). The libpfm4 library can be used to
* translate from the name in the architectural manuals
* to the raw hex value perf_event_open() expects in this
* field."
*/
case PERF_TYPE_BREAKPOINT:
/*
* "If type is PERF_TYPE_BREAKPOINT, then leave config set
* to zero. Its parameters are set in other places."
*/
default:
PRINT_FIELD_X(", ", *attr, config);
break;
}
if (abbrev(tcp))
goto print_perf_event_attr_out;
if (attr->freq)
PRINT_FIELD_U(", ", *attr, sample_freq);
else
PRINT_FIELD_U(", ", *attr, sample_period);
PRINT_FIELD_FLAGS(", ", *attr, sample_type, perf_event_sample_format,
"PERF_SAMPLE_???");
PRINT_FIELD_FLAGS(", ", *attr, read_format, perf_event_read_format,
"PERF_FORMAT_???");
tprintf(", disabled=%u"
", inherit=%u"
", pinned=%u"
", exclusive=%u"
", exclusive_user=%u"
", exclude_kernel=%u"
", exclude_hv=%u"
", exclude_idle=%u"
", mmap=%u"
", comm=%u"
", freq=%u"
", inherit_stat=%u"
", enable_on_exec=%u"
", task=%u"
", watermark=%u"
", precise_ip=%u",
attr->disabled,
attr->inherit,
attr->pinned,
attr->exclusive,
attr->exclude_user,
attr->exclude_kernel,
attr->exclude_hv,
attr->exclude_idle,
attr->mmap,
attr->comm,
attr->freq,
attr->inherit_stat,
attr->enable_on_exec,
attr->task,
attr->watermark,
attr->precise_ip);
tprints_comment(precise_ip_desc[attr->precise_ip]);
tprintf(", mmap_data=%u"
", sample_id_all=%u"
", exclude_host=%u"
", exclude_guest=%u"
", exclude_callchain_kernel=%u"
", exclude_callchain_user=%u"
", mmap2=%u"
", comm_exec=%u"
", use_clockid=%u"
", context_switch=%u"
", write_backward=%u"
", namespaces=%u",
attr->mmap_data,
attr->sample_id_all,
attr->exclude_host,
attr->exclude_guest,
attr->exclude_callchain_kernel,
attr->exclude_callchain_user,
attr->mmap2,
attr->comm_exec,
attr->use_clockid,
attr->context_switch,
attr->write_backward,
attr->namespaces);
/*
* Print it only in case it is non-zero, since it may contain flags we
* are not aware about.
*/
if (attr->__reserved_1) {
tprintf(", __reserved_1=%#" PRIx64,
(uint64_t) attr->__reserved_1);
tprints_comment("Bits 63..29");
}
if (attr->watermark)
PRINT_FIELD_U(", ", *attr, wakeup_watermark);
else
PRINT_FIELD_U(", ", *attr, wakeup_events);
if (attr->type == PERF_TYPE_BREAKPOINT)
/* Any combination of R/W with X is deemed invalid */
PRINT_FIELD_XVAL(", ", *attr, bp_type, hw_breakpoint_type,
(attr->bp_type <=
(HW_BREAKPOINT_X | HW_BREAKPOINT_RW))
? "HW_BREAKPOINT_INVALID"
: "HW_BREAKPOINT_???");
if (attr->type == PERF_TYPE_BREAKPOINT)
PRINT_FIELD_X(", ", *attr, bp_addr);
else
PRINT_FIELD_X(", ", *attr, config1);
/*
* Fields after bp_addr/config1 are optional and may not present; check
* against size is needed.
*/
_PERF_CHECK_FIELD(bp_len);
if (attr->type == PERF_TYPE_BREAKPOINT)
PRINT_FIELD_U(", ", *attr, bp_len);
else
PRINT_FIELD_X(", ", *attr, config2);
_PERF_CHECK_FIELD(branch_sample_type);
if (attr->sample_type & PERF_SAMPLE_BRANCH_STACK) {
PRINT_FIELD_FLAGS(", ", *attr, branch_sample_type,
perf_branch_sample_type,
"PERF_SAMPLE_BRANCH_???");
}
_PERF_CHECK_FIELD(sample_regs_user);
/*
* "This bit mask defines the set of user CPU registers to dump on
* samples. The layout of the register mask is architecture-specific and
* described in the kernel header
* arch/ARCH/include/uapi/asm/perf_regs.h."
*/
PRINT_FIELD_X(", ", *attr, sample_regs_user);
_PERF_CHECK_FIELD(sample_stack_user);
/*
* "size of the user stack to dump if PERF_SAMPLE_STACK_USER is
* specified."
*/
if (attr->sample_type & PERF_SAMPLE_STACK_USER)
PRINT_FIELD_X(", ", *attr, sample_stack_user);
if (attr->use_clockid) {
_PERF_CHECK_FIELD(clockid);
PRINT_FIELD_XVAL(", ", *attr, clockid, clocknames, "CLOCK_???");
}
_PERF_CHECK_FIELD(sample_regs_intr);
PRINT_FIELD_X(", ", *attr, sample_regs_intr);
_PERF_CHECK_FIELD(aux_watermark);
PRINT_FIELD_U(", ", *attr, aux_watermark);
_PERF_CHECK_FIELD(sample_max_stack);
PRINT_FIELD_U(", ", *attr, sample_max_stack);
/* _PERF_CHECK_FIELD(__reserved_2);
PRINT_FIELD_U(", ", *attr, __reserved2); */
print_perf_event_attr_out:
if ((attr->size && (attr->size > size)) ||
(!attr->size && (size < PERF_ATTR_SIZE_VER0)))
tprints(", ...");
tprints("}");
}
SYS_FUNC(perf_event_open)
{
/*
* We try to copy out the whole structure on entering in order to check
* size value on exiting. We do not check the rest of the fields because
* they shouldn't be changed, but copy the whole structure instead
* of just size field because they could.
*/
if (entering(tcp)) {
if (!fetch_perf_event_attr(tcp, tcp->u_arg[0]))
return 0;
} else {
print_perf_event_attr(tcp, tcp->u_arg[0]);
}
tprintf(", %d, %d, ",
(int) tcp->u_arg[1],
(int) tcp->u_arg[2]);
printfd(tcp, tcp->u_arg[3]);
tprints(", ");
printflags64(perf_event_open_flags, tcp->u_arg[4], "PERF_FLAG_???");
return RVAL_DECODED | RVAL_FD;
}