You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

319 lines
9.8 KiB

/*
* Copyright (C) 2019 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#define LOG_TAG "android.hardware.tv.cec@1.0-mock"
#include <android-base/logging.h>
#include <utils/Log.h>
#include <hardware/hardware.h>
#include <hardware/hdmi_cec.h>
#include "HdmiCecMock.h"
namespace android {
namespace hardware {
namespace tv {
namespace cec {
namespace V1_0 {
namespace implementation {
/*
* (*set_option)() passes flags controlling the way HDMI-CEC service works down
* to HAL implementation. Those flags will be used in case the feature needs
* update in HAL itself, firmware or microcontroller.
*/
void HdmiCecMock::cec_set_option(int flag, int value) {
// maintain options and set them accordingly
switch (flag) {
case HDMI_OPTION_WAKEUP:
mOptionWakeUp = value;
break;
case HDMI_OPTION_ENABLE_CEC:
mOptionEnableCec = value;
break;
case HDMI_OPTION_SYSTEM_CEC_CONTROL:
mOptionSystemCecControl = value;
break;
case HDMI_OPTION_SET_LANG:
mOptionLanguage = value;
}
}
// Methods from ::android::hardware::tv::cec::V1_0::IHdmiCec follow.
Return<Result> HdmiCecMock::addLogicalAddress(CecLogicalAddress addr) {
// have a list to maintain logical addresses
int size = mLogicalAddresses.size();
mLogicalAddresses.resize(size + 1);
mLogicalAddresses[size + 1] = addr;
return Result::SUCCESS;
}
Return<void> HdmiCecMock::clearLogicalAddress() {
// remove logical address from the list
mLogicalAddresses = {};
return Void();
}
Return<void> HdmiCecMock::getPhysicalAddress(getPhysicalAddress_cb _hidl_cb) {
// maintain a physical address and return it
// default 0xFFFF, update on hotplug event
_hidl_cb(Result::SUCCESS, mPhysicalAddress);
return Void();
}
Return<SendMessageResult> HdmiCecMock::sendMessage(const CecMessage& message) {
if (message.body.size() == 0) {
return SendMessageResult::NACK;
}
sendMessageToFifo(message);
return SendMessageResult::SUCCESS;
}
Return<void> HdmiCecMock::setCallback(const sp<IHdmiCecCallback>& callback) {
if (mCallback != nullptr) {
mCallback = nullptr;
}
if (callback != nullptr) {
mCallback = callback;
mCallback->linkToDeath(this, 0 /*cookie*/);
mInputFile = open(CEC_MSG_IN_FIFO, O_RDWR);
mOutputFile = open(CEC_MSG_OUT_FIFO, O_RDWR);
pthread_create(&mThreadId, NULL, __threadLoop, this);
pthread_setname_np(mThreadId, "hdmi_cec_loop");
}
return Void();
}
Return<int32_t> HdmiCecMock::getCecVersion() {
// maintain a cec version and return it
return mCecVersion;
}
Return<uint32_t> HdmiCecMock::getVendorId() {
return mCecVendorId;
}
Return<void> HdmiCecMock::getPortInfo(getPortInfo_cb _hidl_cb) {
// TODO ready port info from device specific config
_hidl_cb(mPortInfo);
return Void();
}
Return<void> HdmiCecMock::setOption(OptionKey key, bool value) {
cec_set_option(static_cast<int>(key), value ? 1 : 0);
return Void();
}
Return<void> HdmiCecMock::setLanguage(const hidl_string& language) {
if (language.size() != 3) {
LOG(ERROR) << "Wrong language code: expected 3 letters, but it was " << language.size()
<< ".";
return Void();
}
// TODO validate if language is a valid language code
const char* languageStr = language.c_str();
int convertedLanguage = ((languageStr[0] & 0xFF) << 16) | ((languageStr[1] & 0xFF) << 8) |
(languageStr[2] & 0xFF);
cec_set_option(HDMI_OPTION_SET_LANG, convertedLanguage);
return Void();
}
Return<void> HdmiCecMock::enableAudioReturnChannel(int32_t portId __unused, bool enable __unused) {
// Maintain ARC status
return Void();
}
Return<bool> HdmiCecMock::isConnected(int32_t portId) {
// maintain port connection status and update on hotplug event
if (portId < mTotalPorts && portId >= 0) {
return mPortConnectionStatus[portId];
}
return false;
}
void* HdmiCecMock::__threadLoop(void* user) {
HdmiCecMock* const self = static_cast<HdmiCecMock*>(user);
self->threadLoop();
return 0;
}
int HdmiCecMock::readMessageFromFifo(unsigned char* buf, int msgCount) {
if (msgCount <= 0 || !buf) {
return 0;
}
int ret = -1;
/* maybe blocked at driver */
ret = read(mInputFile, buf, msgCount);
if (ret < 0) {
ALOGE("[halimp] read :%s failed, ret:%d\n", CEC_MSG_IN_FIFO, ret);
return -1;
}
return ret;
}
int HdmiCecMock::sendMessageToFifo(const CecMessage& message) {
unsigned char msgBuf[CEC_MESSAGE_BODY_MAX_LENGTH];
int ret = -1;
memset(msgBuf, 0, sizeof(msgBuf));
msgBuf[0] = ((static_cast<uint8_t>(message.initiator) & 0xf) << 4) |
(static_cast<uint8_t>(message.destination) & 0xf);
size_t length = std::min(static_cast<size_t>(message.body.size()),
static_cast<size_t>(MaxLength::MESSAGE_BODY));
for (size_t i = 0; i < length; ++i) {
msgBuf[i + 1] = static_cast<unsigned char>(message.body[i]);
}
// open the output pipe for writing outgoing cec message
mOutputFile = open(CEC_MSG_OUT_FIFO, O_WRONLY);
if (mOutputFile < 0) {
ALOGD("[halimp] file open failed for writing");
return -1;
}
// write message into the output pipe
ret = write(mOutputFile, msgBuf, length + 1);
close(mOutputFile);
if (ret < 0) {
ALOGE("[halimp] write :%s failed, ret:%d\n", CEC_MSG_OUT_FIFO, ret);
return -1;
}
return ret;
}
void HdmiCecMock::printCecMsgBuf(const char* msg_buf, int len) {
char buf[64] = {};
int i, size = 0;
memset(buf, 0, sizeof(buf));
for (i = 0; i < len; i++) {
size += sprintf(buf + size, " %02x", msg_buf[i]);
}
ALOGD("[halimp] %s, msg:%s", __FUNCTION__, buf);
}
void HdmiCecMock::handleHotplugMessage(unsigned char* msgBuf) {
HotplugEvent hotplugEvent{.connected = ((msgBuf[3]) & 0xf) > 0,
.portId = static_cast<uint32_t>(msgBuf[0] & 0xf)};
if (hotplugEvent.portId >= mPortInfo.size()) {
ALOGD("[halimp] ignore hot plug message, id %x does not exist", hotplugEvent.portId);
return;
}
ALOGD("[halimp] hot plug port id %x, is connected %x", (msgBuf[0] & 0xf), (msgBuf[3] & 0xf));
if (mPortInfo[hotplugEvent.portId].type == HdmiPortType::OUTPUT) {
mPhysicalAddress =
((hotplugEvent.connected == 0) ? 0xffff : ((msgBuf[1] << 8) | (msgBuf[2])));
mPortInfo[hotplugEvent.portId].physicalAddress = mPhysicalAddress;
ALOGD("[halimp] hot plug physical address %x", mPhysicalAddress);
}
// todo update connection status
if (mCallback != nullptr) {
mCallback->onHotplugEvent(hotplugEvent);
}
}
void HdmiCecMock::handleCecMessage(unsigned char* msgBuf, int megSize) {
CecMessage message;
size_t length = std::min(static_cast<size_t>(megSize - 1),
static_cast<size_t>(MaxLength::MESSAGE_BODY));
message.body.resize(length);
for (size_t i = 0; i < length; ++i) {
message.body[i] = static_cast<uint8_t>(msgBuf[i + 1]);
ALOGD("[halimp] msg body %x", message.body[i]);
}
message.initiator = static_cast<CecLogicalAddress>((msgBuf[0] >> 4) & 0xf);
ALOGD("[halimp] msg init %x", message.initiator);
message.destination = static_cast<CecLogicalAddress>((msgBuf[0] >> 0) & 0xf);
ALOGD("[halimp] msg dest %x", message.destination);
// messageValidateAndHandle(&event);
if (mCallback != nullptr) {
mCallback->onCecMessage(message);
}
}
void HdmiCecMock::threadLoop() {
ALOGD("[halimp] threadLoop start.");
unsigned char msgBuf[CEC_MESSAGE_BODY_MAX_LENGTH];
int r = -1;
// open the input pipe
while (mInputFile < 0) {
usleep(1000 * 1000);
mInputFile = open(CEC_MSG_IN_FIFO, O_RDONLY);
}
ALOGD("[halimp] file open ok, fd = %d.", mInputFile);
while (mCecThreadRun) {
if (!mOptionSystemCecControl) {
usleep(1000 * 1000);
continue;
}
memset(msgBuf, 0, sizeof(msgBuf));
// try to get a message from dev.
// echo -n -e '\x04\x83' >> /dev/cec
r = readMessageFromFifo(msgBuf, CEC_MESSAGE_BODY_MAX_LENGTH);
if (r <= 1) {
// ignore received ping messages
continue;
}
printCecMsgBuf((const char*)msgBuf, r);
if (((msgBuf[0] >> 4) & 0xf) == 0xf) {
// the message is a hotplug event
handleHotplugMessage(msgBuf);
continue;
}
handleCecMessage(msgBuf, r);
}
ALOGD("[halimp] thread end.");
// mCecDevice.mExited = true;
}
HdmiCecMock::HdmiCecMock() {
ALOGE("[halimp] Opening a virtual HAL for testing and virtual machine.");
mCallback = nullptr;
mPortInfo.resize(mTotalPorts);
mPortConnectionStatus.resize(mTotalPorts);
mPortInfo[0] = {.type = HdmiPortType::OUTPUT,
.portId = static_cast<uint32_t>(0),
.cecSupported = true,
.arcSupported = false,
.physicalAddress = mPhysicalAddress};
mPortConnectionStatus[0] = false;
}
} // namespace implementation
} // namespace V1_0
} // namespace cec
} // namespace tv
} // namespace hardware
} // namespace android