You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

190 lines
6.0 KiB

/******************************************************************************
*
* Copyright 2002-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This file contains HID protocol definitions
*
******************************************************************************/
#ifndef HIDDEFS_H
#define HIDDEFS_H
#include <string>
#include "sdp_api.h"
/*
* tHID_STATUS: HID result codes, returned by HID and device and host functions.
*/
typedef enum : uint8_t {
HID_SUCCESS = 0,
HID_ERR_NOT_REGISTERED,
HID_ERR_ALREADY_REGISTERED,
HID_ERR_NO_RESOURCES,
HID_ERR_NO_CONNECTION,
HID_ERR_INVALID_PARAM,
HID_ERR_UNSUPPORTED,
HID_ERR_UNKNOWN_COMMAND,
HID_ERR_CONGESTED,
HID_ERR_CONN_IN_PROCESS,
HID_ERR_ALREADY_CONN,
HID_ERR_DISCONNECTING,
HID_ERR_SET_CONNABLE_FAIL,
/* Device specific error codes */
HID_ERR_HOST_UNKNOWN,
HID_ERR_L2CAP_FAILED,
HID_ERR_AUTH_FAILED,
HID_ERR_SDP_BUSY,
HID_ERR_GATT,
HID_ERR_INVALID = 0xFF
} tHID_STATUS;
#define CASE_RETURN_TEXT(code) \
case code: \
return #code
inline std::string hid_status_text(const tHID_STATUS& status) {
switch (status) {
CASE_RETURN_TEXT(HID_SUCCESS);
CASE_RETURN_TEXT(HID_ERR_NOT_REGISTERED);
CASE_RETURN_TEXT(HID_ERR_ALREADY_REGISTERED);
CASE_RETURN_TEXT(HID_ERR_NO_RESOURCES);
CASE_RETURN_TEXT(HID_ERR_NO_CONNECTION);
CASE_RETURN_TEXT(HID_ERR_INVALID_PARAM);
CASE_RETURN_TEXT(HID_ERR_UNSUPPORTED);
CASE_RETURN_TEXT(HID_ERR_UNKNOWN_COMMAND);
CASE_RETURN_TEXT(HID_ERR_CONGESTED);
CASE_RETURN_TEXT(HID_ERR_CONN_IN_PROCESS);
CASE_RETURN_TEXT(HID_ERR_ALREADY_CONN);
CASE_RETURN_TEXT(HID_ERR_DISCONNECTING);
CASE_RETURN_TEXT(HID_ERR_SET_CONNABLE_FAIL);
CASE_RETURN_TEXT(HID_ERR_HOST_UNKNOWN);
CASE_RETURN_TEXT(HID_ERR_L2CAP_FAILED);
CASE_RETURN_TEXT(HID_ERR_AUTH_FAILED);
CASE_RETURN_TEXT(HID_ERR_SDP_BUSY);
CASE_RETURN_TEXT(HID_ERR_GATT);
CASE_RETURN_TEXT(HID_ERR_INVALID);
default:
return std::string("UNKNOWN[%hhu]", status);
}
}
#undef CASE_RETURN_TEXT
#define HID_L2CAP_CONN_FAIL \
(0x0100) /* Connection Attempt was made but failed */
#define HID_L2CAP_REQ_FAIL (0x0200) /* L2CAP_ConnectReq API failed */
#define HID_L2CAP_CFG_FAIL \
(0x0400) /* L2CAP Configuration was rejected by peer */
/* Define the HID transaction types
*/
#define HID_TRANS_HANDSHAKE (0)
#define HID_TRANS_CONTROL (1)
#define HID_TRANS_GET_REPORT (4)
#define HID_TRANS_SET_REPORT (5)
#define HID_TRANS_GET_PROTOCOL (6)
#define HID_TRANS_SET_PROTOCOL (7)
#define HID_TRANS_GET_IDLE (8)
#define HID_TRANS_SET_IDLE (9)
#define HID_TRANS_DATA (10)
#define HID_TRANS_DATAC (11)
#define HID_GET_TRANS_FROM_HDR(x) (((x) >> 4) & 0x0f)
#define HID_GET_PARAM_FROM_HDR(x) ((x)&0x0f)
#define HID_BUILD_HDR(t, p) (uint8_t)(((t) << 4) | ((p)&0x0f))
/* Parameters for Handshake
*/
#define HID_PAR_HANDSHAKE_RSP_SUCCESS (0)
#define HID_PAR_HANDSHAKE_RSP_NOT_READY (1)
#define HID_PAR_HANDSHAKE_RSP_ERR_INVALID_REP_ID (2)
#define HID_PAR_HANDSHAKE_RSP_ERR_UNSUPPORTED_REQ (3)
#define HID_PAR_HANDSHAKE_RSP_ERR_INVALID_PARAM (4)
#define HID_PAR_HANDSHAKE_RSP_ERR_UNKNOWN (14)
#define HID_PAR_HANDSHAKE_RSP_ERR_FATAL (15)
/* Parameters for Control
*/
#define HID_PAR_CONTROL_NOP (0)
#define HID_PAR_CONTROL_HARD_RESET (1)
#define HID_PAR_CONTROL_SOFT_RESET (2)
#define HID_PAR_CONTROL_SUSPEND (3)
#define HID_PAR_CONTROL_EXIT_SUSPEND (4)
#define HID_PAR_CONTROL_VIRTUAL_CABLE_UNPLUG (5)
/* Different report types in get, set, data
*/
#define HID_PAR_REP_TYPE_MASK (0x03)
#define HID_PAR_REP_TYPE_OTHER (0x00)
#define HID_PAR_REP_TYPE_INPUT (0x01)
#define HID_PAR_REP_TYPE_OUTPUT (0x02)
#define HID_PAR_REP_TYPE_FEATURE (0x03)
/* Parameters for Get Report
*/
/* Buffer size in two bytes after Report ID */
#define HID_PAR_GET_REP_BUFSIZE_FOLLOWS (0x08)
/* Parameters for Protocol Type
*/
#define HID_PAR_PROTOCOL_MASK (0x01)
#define HID_PAR_PROTOCOL_REPORT (0x01)
#define HID_PAR_PROTOCOL_BOOT_MODE (0x00)
#define HID_PAR_REP_TYPE_MASK (0x03)
/* Descriptor types in the SDP record
*/
#define HID_SDP_DESCRIPTOR_REPORT (0x22)
#define HID_SDP_DESCRIPTOR_PHYSICAL (0x23)
typedef struct desc_info {
uint16_t dl_len;
uint8_t* dsc_list;
} tHID_DEV_DSCP_INFO;
#define HID_SSR_PARAM_INVALID 0xffff
#define HIDD_APP_DESCRIPTOR_LEN 2048
typedef struct sdp_info {
char svc_name[HID_MAX_SVC_NAME_LEN]; /*Service Name */
char svc_descr[HID_MAX_SVC_DESCR_LEN]; /*Service Description*/
char prov_name[HID_MAX_PROV_NAME_LEN]; /*Provider Name.*/
uint16_t rel_num; /*Release Number */
uint16_t hpars_ver; /*HID Parser Version.*/
uint16_t ssr_max_latency; /* HIDSSRHostMaxLatency value, if
HID_SSR_PARAM_INVALID not used*/
uint16_t
ssr_min_tout; /* HIDSSRHostMinTimeout value, if HID_SSR_PARAM_INVALID not
used* */
uint8_t sub_class; /*Device Subclass.*/
uint8_t ctry_code; /*Country Code.*/
uint16_t sup_timeout; /* Supervisory Timeout */
tHID_DEV_DSCP_INFO dscp_info; /* Descriptor list and Report list to be set in
the SDP record.
This parameter is used if
HID_DEV_USE_GLB_SDP_REC is set to false.*/
tSDP_DISC_REC* p_sdp_layer_rec;
} tHID_DEV_SDP_INFO;
#endif