king
/
v811_spc009
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '1344b61cf0'
${ noResults }
v811_spc009/system/bt/stack/pan/pan_api.cc

655 lines
23 KiB
Raw Blame History

/******************************************************************************
*
* Copyright 1999-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/*****************************************************************************
*
* This file contains main functions to support PAN profile
* commands and events.
*
*****************************************************************************/
#include "pan_api.h"
#include <base/logging.h>
#include <string.h>
#include "bnep_api.h"
#include "bt_common.h"
#include "bt_types.h"
#include "bta_sys.h"
#include "btm_api.h"
#include "hcidefs.h"
#include "l2c_api.h"
#include "pan_int.h"
#include "sdp_api.h"
#include "sdpdefs.h"
#include "stack/btm/btm_sec.h"
using bluetooth::Uuid;
/*******************************************************************************
*
* Function PAN_Register
*
* Description This function is called by the application to register
* its callbacks with PAN profile. The application then
* should set the PAN role explicitly.
*
* Parameters: p_register - contains all callback function pointers
*
*
* Returns none
*
******************************************************************************/
void PAN_Register(tPAN_REGISTER* p_register) {
pan_register_with_bnep();
if (!p_register) return;
pan_cb.pan_conn_state_cb = p_register->pan_conn_state_cb;
pan_cb.pan_bridge_req_cb = p_register->pan_bridge_req_cb;
pan_cb.pan_data_buf_ind_cb = p_register->pan_data_buf_ind_cb;
pan_cb.pan_data_ind_cb = p_register->pan_data_ind_cb;
pan_cb.pan_pfilt_ind_cb = p_register->pan_pfilt_ind_cb;
pan_cb.pan_mfilt_ind_cb = p_register->pan_mfilt_ind_cb;
pan_cb.pan_tx_data_flow_cb = p_register->pan_tx_data_flow_cb;
return;
}
/*******************************************************************************
*
* Function PAN_Deregister
*
* Description This function is called by the application to de-register
* its callbacks with PAN profile. This will make the PAN to
* become inactive. This will deregister PAN services from SDP
* and close all active connections
*
* Parameters: none
*
*
* Returns none
*
******************************************************************************/
void PAN_Deregister(void) {
pan_cb.pan_bridge_req_cb = NULL;
pan_cb.pan_data_buf_ind_cb = NULL;
pan_cb.pan_data_ind_cb = NULL;
pan_cb.pan_conn_state_cb = NULL;
pan_cb.pan_pfilt_ind_cb = NULL;
pan_cb.pan_mfilt_ind_cb = NULL;
PAN_SetRole(PAN_ROLE_INACTIVE, NULL, NULL);
BNEP_Deregister();
return;
}
/*******************************************************************************
*
* Function PAN_SetRole
*
* Description This function is called by the application to set the PAN
* profile role. This should be called after PAN_Register.
* This can be called any time to change the PAN role
*
* Parameters: role - is bit map of roles to be active
* PAN_ROLE_CLIENT is for PANU role
* PAN_ROLE_NAP_SERVER is for NAP role
* p_user_name - Service name for PANU role
* p_nap_name - Service name for NAP role
* Can be NULL if user wants the default
*
* Returns PAN_SUCCESS - if the role is set successfully
* PAN_FAILURE - if the role is not valid
*
******************************************************************************/
tPAN_RESULT PAN_SetRole(uint8_t role, const char* p_user_name,
const char* p_nap_name) {
/* Check if it is a shutdown request */
if (role == PAN_ROLE_INACTIVE) {
pan_close_all_connections();
pan_cb.role = role;
return PAN_SUCCESS;
}
const char* p_desc;
/* If the role is not a valid combination reject it */
if ((!(role & (PAN_ROLE_CLIENT | PAN_ROLE_NAP_SERVER))) &&
role != PAN_ROLE_INACTIVE) {
PAN_TRACE_ERROR("PAN role %d is invalid", role);
return PAN_FAILURE;
}
/* If the current active role is same as the role being set do nothing */
if (pan_cb.role == role) {
PAN_TRACE_EVENT("PAN role already was set to: %d", role);
return PAN_SUCCESS;
}
/* Register all the roles with SDP */
PAN_TRACE_API("PAN_SetRole() called with role 0x%x", role);
#if (PAN_SUPPORTS_ROLE_NAP == TRUE)
if (role & PAN_ROLE_NAP_SERVER) {
/* Check the service name */
if ((p_nap_name == NULL) || (*p_nap_name == 0))
p_nap_name = PAN_NAP_DEFAULT_SERVICE_NAME;
/* Registering for NAP service with SDP */
p_desc = PAN_NAP_DEFAULT_DESCRIPTION;
if (pan_cb.pan_nap_sdp_handle != 0)
SDP_DeleteRecord(pan_cb.pan_nap_sdp_handle);
pan_cb.pan_nap_sdp_handle =
pan_register_with_sdp(UUID_SERVCLASS_NAP, p_nap_name, p_desc);
bta_sys_add_uuid(UUID_SERVCLASS_NAP);
}
/* If the NAP role is already active and now being cleared delete the record
*/
else if (pan_cb.role & PAN_ROLE_NAP_SERVER) {
if (pan_cb.pan_nap_sdp_handle != 0) {
SDP_DeleteRecord(pan_cb.pan_nap_sdp_handle);
pan_cb.pan_nap_sdp_handle = 0;
bta_sys_remove_uuid(UUID_SERVCLASS_NAP);
}
}
#endif
#if (PAN_SUPPORTS_ROLE_PANU == TRUE)
if (role & PAN_ROLE_CLIENT) {
/* Check the service name */
if ((p_user_name == NULL) || (*p_user_name == 0))
p_user_name = PAN_PANU_DEFAULT_SERVICE_NAME;
/* Registering for PANU service with SDP */
p_desc = PAN_PANU_DEFAULT_DESCRIPTION;
if (pan_cb.pan_user_sdp_handle != 0)
SDP_DeleteRecord(pan_cb.pan_user_sdp_handle);
pan_cb.pan_user_sdp_handle =
pan_register_with_sdp(UUID_SERVCLASS_PANU, p_user_name, p_desc);
bta_sys_add_uuid(UUID_SERVCLASS_PANU);
}
/* If the PANU role is already active and now being cleared delete the record
*/
else if (pan_cb.role & PAN_ROLE_CLIENT) {
if (pan_cb.pan_user_sdp_handle != 0) {
SDP_DeleteRecord(pan_cb.pan_user_sdp_handle);
pan_cb.pan_user_sdp_handle = 0;
bta_sys_remove_uuid(UUID_SERVCLASS_PANU);
}
}
#endif
pan_cb.role = role;
PAN_TRACE_EVENT("PAN role set to: %d", role);
return PAN_SUCCESS;
}
/*******************************************************************************
*
* Function PAN_Connect
*
* Description This function is called by the application to initiate a
* connection to the remote device
*
* Parameters: rem_bda - BD Addr of the remote device
* src_role - Role of the local device for the connection
* dst_role - Role of the remote device for the connection
* PAN_ROLE_CLIENT is for PANU role
* PAN_ROLE_NAP_SERVER is for NAP role
* *handle - Pointer for returning Handle to the connection
*
* Returns PAN_SUCCESS - if the connection is initiated
* successfully
* PAN_NO_RESOURCES - resources are not sufficent
* PAN_FAILURE - if the connection cannot be initiated
* this can be because of the combination of
* src and dst roles may not be valid or
* allowed at that point of time
*
******************************************************************************/
tPAN_RESULT PAN_Connect(const RawAddress& rem_bda, uint8_t src_role,
uint8_t dst_role, uint16_t* handle) {
uint32_t mx_chan_id;
/*
** Initialize the handle so that in case of failure return values
** the profile will not get confused
*/
*handle = BNEP_INVALID_HANDLE;
/* Check if PAN is active or not */
if (!(pan_cb.role & src_role)) {
PAN_TRACE_ERROR("PAN is not active for the role %d", src_role);
return PAN_FAILURE;
}
/* Validate the parameters before proceeding */
if ((src_role != PAN_ROLE_CLIENT && src_role != PAN_ROLE_NAP_SERVER) ||
(dst_role != PAN_ROLE_CLIENT && dst_role != PAN_ROLE_NAP_SERVER)) {
PAN_TRACE_ERROR("Either source %d or destination role %d is invalid",
src_role, dst_role);
return PAN_FAILURE;
}
/* Check if connection exists for this remote device */
tPAN_CONN* pcb = pan_get_pcb_by_addr(rem_bda);
uint16_t src_uuid, dst_uuid;
/* If we are PANU for this role validate destination role */
if (src_role == PAN_ROLE_CLIENT) {
if ((pan_cb.num_conns > 1) || (pan_cb.num_conns && (!pcb))) {
/*
** If the request is not for existing connection reject it
** because if there is already a connection we cannot accept
** another connection in PANU role
*/
PAN_TRACE_ERROR(
"Cannot make PANU connections when there are more than one "
"connection");
return PAN_INVALID_SRC_ROLE;
}
src_uuid = UUID_SERVCLASS_PANU;
if (dst_role == PAN_ROLE_CLIENT) {
dst_uuid = UUID_SERVCLASS_PANU;
} else {
dst_uuid = UUID_SERVCLASS_NAP;
}
mx_chan_id = dst_uuid;
}
/* If destination is PANU role validate source role */
else if (dst_role == PAN_ROLE_CLIENT) {
if (pan_cb.num_conns && pan_cb.active_role == PAN_ROLE_CLIENT && !pcb) {
PAN_TRACE_ERROR("Device already have a connection in PANU role");
return PAN_INVALID_SRC_ROLE;
}
dst_uuid = UUID_SERVCLASS_PANU;
src_uuid = UUID_SERVCLASS_NAP;
mx_chan_id = src_uuid;
}
/* The role combination is not valid */
else {
PAN_TRACE_ERROR(
"Source %d and Destination roles %d are not valid combination",
src_role, dst_role);
return PAN_FAILURE;
}
/* Allocate control block and initiate connection */
if (!pcb) pcb = pan_allocate_pcb(rem_bda, BNEP_INVALID_HANDLE);
if (!pcb) {
PAN_TRACE_ERROR("PAN Connection failed because of no resources");
return PAN_NO_RESOURCES;
}
VLOG(0) << __func__ << " for BD Addr: " << rem_bda;
if (pcb->con_state == PAN_STATE_IDLE) {
pan_cb.num_conns++;
} else if (pcb->con_state == PAN_STATE_CONNECTED) {
pcb->con_flags |= PAN_FLAGS_CONN_COMPLETED;
} else
/* PAN connection is still in progress */
return PAN_WRONG_STATE;
pcb->con_state = PAN_STATE_CONN_START;
pcb->prv_src_uuid = pcb->src_uuid;
pcb->prv_dst_uuid = pcb->dst_uuid;
pcb->src_uuid = src_uuid;
pcb->dst_uuid = dst_uuid;
tBNEP_RESULT ret =
BNEP_Connect(rem_bda, Uuid::From16Bit(src_uuid),
Uuid::From16Bit(dst_uuid), &(pcb->handle), mx_chan_id);
if (ret != BNEP_SUCCESS) {
pan_release_pcb(pcb);
return ret;
}
PAN_TRACE_DEBUG("PAN_Connect() current active role set to %d", src_role);
pan_cb.prv_active_role = pan_cb.active_role;
pan_cb.active_role = src_role;
*handle = pcb->handle;
return PAN_SUCCESS;
}
/*******************************************************************************
*
* Function PAN_Disconnect
*
* Description This is used to disconnect the connection
*
* Parameters: handle - handle for the connection
*
* Returns PAN_SUCCESS - if the connection is closed successfully
* PAN_FAILURE - if the connection is not found or
* there is an error in disconnecting
*
******************************************************************************/
tPAN_RESULT PAN_Disconnect(uint16_t handle) {
tPAN_CONN* pcb;
tBNEP_RESULT result;
/* Check if the connection exists */
pcb = pan_get_pcb_by_handle(handle);
if (!pcb) {
PAN_TRACE_ERROR("PAN connection not found for the handle %d", handle);
return PAN_FAILURE;
}
result = BNEP_Disconnect(pcb->handle);
if (pcb->con_state != PAN_STATE_IDLE) pan_cb.num_conns--;
if (pan_cb.pan_bridge_req_cb && pcb->src_uuid == UUID_SERVCLASS_NAP)
(*pan_cb.pan_bridge_req_cb)(pcb->rem_bda, false);
pan_release_pcb(pcb);
if (result != BNEP_SUCCESS) {
PAN_TRACE_EVENT("Error in closing PAN connection");
return PAN_FAILURE;
}
PAN_TRACE_EVENT("PAN connection closed");
return PAN_SUCCESS;
}
/*******************************************************************************
*
* Function PAN_Write
*
* Description This sends data over the PAN connections. If this is called
* on GN or NAP side and the packet is multicast or broadcast
* it will be sent on all the links. Otherwise the correct link
* is found based on the destination address and forwarded on
* it.
*
* Parameters: handle - handle for the connection
* dst - MAC or BD Addr of the destination device
* src - MAC or BD Addr of the source who sent this packet
* protocol - protocol of the ethernet packet like IP or ARP
* p_data - pointer to the data
* len - length of the data
* ext - to indicate that extension headers present
*
* Returns PAN_SUCCESS - if the data is sent successfully
* PAN_FAILURE - if the connection is not found or
* there is an error in sending data
*
******************************************************************************/
tPAN_RESULT PAN_Write(uint16_t handle, const RawAddress& dst,
const RawAddress& src, uint16_t protocol, uint8_t* p_data,
uint16_t len, bool ext) {
if (pan_cb.role == PAN_ROLE_INACTIVE || !pan_cb.num_conns) {
PAN_TRACE_ERROR("%s PAN is not active, data write failed.", __func__);
return PAN_FAILURE;
}
// If the packet is broadcast or multicast, we're going to have to create
// a copy of the packet for each connection. We can save one extra copy
// by fast-pathing here and calling BNEP_Write instead of placing the packet
// in a BT_HDR buffer, calling BNEP_Write, and then freeing the buffer.
if (dst.address[0] & 0x01) {
int i;
for (i = 0; i < MAX_PAN_CONNS; ++i) {
if (pan_cb.pcb[i].con_state == PAN_STATE_CONNECTED)
BNEP_Write(pan_cb.pcb[i].handle, dst, p_data, len, protocol, &src, ext);
}
return PAN_SUCCESS;
}
BT_HDR* buffer = (BT_HDR*)osi_malloc(PAN_BUF_SIZE);
buffer->len = len;
buffer->offset = PAN_MINIMUM_OFFSET;
memcpy((uint8_t*)buffer + sizeof(BT_HDR) + buffer->offset, p_data,
buffer->len);
return PAN_WriteBuf(handle, dst, src, protocol, buffer, ext);
}
/*******************************************************************************
*
* Function PAN_WriteBuf
*
* Description This sends data over the PAN connections. If this is called
* on GN or NAP side and the packet is multicast or broadcast
* it will be sent on all the links. Otherwise the correct link
* is found based on the destination address and forwarded on
* it. If the return value is not PAN_SUCCESS, the application
* should take care of releasing the message buffer.
*
* Parameters: handle - handle for the connection
* dst - MAC or BD Addr of the destination device
* src - MAC or BD Addr of the source who sent this packet
* protocol - protocol of the ethernet packet like IP or ARP
* p_buf - pointer to the data buffer
* ext - to indicate that extension headers present
*
* Returns PAN_SUCCESS - if the data is sent successfully
* PAN_FAILURE - if the connection is not found or
* there is an error in sending data
*
******************************************************************************/
tPAN_RESULT PAN_WriteBuf(uint16_t handle, const RawAddress& dst,
const RawAddress& src, uint16_t protocol,
BT_HDR* p_buf, bool ext) {
tPAN_CONN* pcb;
uint16_t i;
tBNEP_RESULT result;
if (pan_cb.role == PAN_ROLE_INACTIVE || (!(pan_cb.num_conns))) {
PAN_TRACE_ERROR("PAN is not active Data write failed");
osi_free(p_buf);
return PAN_FAILURE;
}
/* Check if it is broadcast or multicast packet */
if (dst.address[0] & 0x01) {
uint8_t* data = (uint8_t*)p_buf + sizeof(BT_HDR) + p_buf->offset;
for (i = 0; i < MAX_PAN_CONNS; ++i) {
if (pan_cb.pcb[i].con_state == PAN_STATE_CONNECTED)
BNEP_Write(pan_cb.pcb[i].handle, dst, data, p_buf->len, protocol, &src,
ext);
}
osi_free(p_buf);
return PAN_SUCCESS;
}
/* Check if the data write is on PANU side */
if (pan_cb.active_role == PAN_ROLE_CLIENT) {
/* Data write is on PANU connection */
for (i = 0; i < MAX_PAN_CONNS; i++) {
if (pan_cb.pcb[i].con_state == PAN_STATE_CONNECTED &&
pan_cb.pcb[i].src_uuid == UUID_SERVCLASS_PANU)
break;
}
if (i == MAX_PAN_CONNS) {
PAN_TRACE_ERROR("PAN Don't have any user connections");
osi_free(p_buf);
return PAN_FAILURE;
}
result =
BNEP_WriteBuf(pan_cb.pcb[i].handle, dst, p_buf, protocol, &src, ext);
if (result == BNEP_IGNORE_CMD) {
PAN_TRACE_DEBUG("PAN ignored data write for PANU connection");
return result;
} else if (result != BNEP_SUCCESS) {
PAN_TRACE_ERROR("PAN failed to write data for the PANU connection");
return result;
}
PAN_TRACE_DEBUG("PAN successfully wrote data for the PANU connection");
return PAN_SUCCESS;
}
/* findout to which connection the data is meant for */
pcb = pan_get_pcb_by_handle(handle);
if (!pcb) {
PAN_TRACE_ERROR("PAN Buf write for wrong handle");
osi_free(p_buf);
return PAN_FAILURE;
}
if (pcb->con_state != PAN_STATE_CONNECTED) {
PAN_TRACE_ERROR("PAN Buf write when conn is not active");
osi_free(p_buf);
return PAN_FAILURE;
}
result = BNEP_WriteBuf(pcb->handle, dst, p_buf, protocol, &src, ext);
if (result == BNEP_IGNORE_CMD) {
PAN_TRACE_DEBUG("PAN ignored data buf write to PANU");
return result;
} else if (result != BNEP_SUCCESS) {
PAN_TRACE_ERROR("PAN failed to send data buf to the PANU");
return result;
}
PAN_TRACE_DEBUG("PAN successfully sent data buf to the PANU");
return PAN_SUCCESS;
}
/*******************************************************************************
*
* Function PAN_SetProtocolFilters
*
* Description This function is used to set protocol filters on the peer
*
* Parameters: handle - handle for the connection
* num_filters - number of protocol filter ranges
* start - array of starting protocol numbers
* end - array of ending protocol numbers
*
*
* Returns PAN_SUCCESS if protocol filters are set successfully
* PAN_FAILURE if connection not found or error in setting
*
******************************************************************************/
tPAN_RESULT PAN_SetProtocolFilters(uint16_t handle, uint16_t num_filters,
uint16_t* p_start_array,
uint16_t* p_end_array) {
tPAN_CONN* pcb;
tPAN_RESULT result;
/* Check if the connection exists */
pcb = pan_get_pcb_by_handle(handle);
if (!pcb) {
PAN_TRACE_ERROR("PAN connection not found for the handle %d", handle);
return PAN_FAILURE;
}
result = BNEP_SetProtocolFilters(pcb->handle, num_filters, p_start_array,
p_end_array);
if (result != BNEP_SUCCESS) {
PAN_TRACE_ERROR("PAN failed to set protocol filters for handle %d", handle);
return result;
}
PAN_TRACE_API("PAN successfully sent protocol filters for handle %d", handle);
return PAN_SUCCESS;
}
/*******************************************************************************
*
* Function PAN_SetMulticastFilters
*
* Description This function is used to set multicast filters on the peer
*
* Parameters: handle - handle for the connection
* num_filters - number of multicast filter ranges
* start - array of starting multicast filter addresses
* end - array of ending multicast filter addresses
*
*
* Returns PAN_SUCCESS if multicast filters are set successfully
* PAN_FAILURE if connection not found or error in setting
*
******************************************************************************/
tBNEP_RESULT PAN_SetMulticastFilters(uint16_t handle,
uint16_t num_mcast_filters,
uint8_t* p_start_array,
uint8_t* p_end_array) {
tPAN_CONN* pcb;
tPAN_RESULT result;
/* Check if the connection exists */
pcb = pan_get_pcb_by_handle(handle);
if (!pcb) {
PAN_TRACE_ERROR("PAN connection not found for the handle %d", handle);
return PAN_FAILURE;
}
result = BNEP_SetMulticastFilters(pcb->handle, num_mcast_filters,
p_start_array, p_end_array);
if (result != BNEP_SUCCESS) {
PAN_TRACE_ERROR("PAN failed to set multicast filters for handle %d",
handle);
return result;
}
PAN_TRACE_API("PAN successfully sent multicast filters for handle %d",
handle);
return PAN_SUCCESS;
}
/*******************************************************************************
*
* Function PAN_SetTraceLevel
*
* Description This function sets the trace level for PAN. If called with
* a value of 0xFF, it simply reads the current trace level.
*
* Returns the new (current) trace level
*
******************************************************************************/
uint8_t PAN_SetTraceLevel(uint8_t new_level) {
if (new_level != 0xFF)
pan_cb.trace_level = new_level;
else
pan_dump_status();
return (pan_cb.trace_level);
}
/*******************************************************************************
*
* Function PAN_Init
*
* Description This function initializes the PAN module variables
*
* Parameters: none
*
* Returns none
*
******************************************************************************/
void PAN_Init(void) {
memset(&pan_cb, 0, sizeof(tPAN_CB));
#if defined(PAN_INITIAL_TRACE_LEVEL)
pan_cb.trace_level = PAN_INITIAL_TRACE_LEVEL;
#else
pan_cb.trace_level = BT_TRACE_LEVEL_NONE; /* No traces */
#endif
}
Reference in new issue View Git Blame Copy Permalink