You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
127 lines
3.8 KiB
127 lines
3.8 KiB
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2012 Samsung Electronics
|
|
* R. Chandrasekar <rcsekar@samsung.com>
|
|
*/
|
|
|
|
#ifndef __I2S_H__
|
|
#define __I2S_H__
|
|
|
|
/*
|
|
* DAI hardware audio formats.
|
|
*
|
|
* Describes the physical PCM data formating and clocking. Add new formats
|
|
* to the end.
|
|
*/
|
|
#define SND_SOC_DAIFMT_I2S 1 /* I2S mode */
|
|
#define SND_SOC_DAIFMT_RIGHT_J 2 /* Right Justified mode */
|
|
#define SND_SOC_DAIFMT_LEFT_J 3 /* Left Justified mode */
|
|
#define SND_SOC_DAIFMT_DSP_A 4 /* L data MSB after FRM LRC */
|
|
#define SND_SOC_DAIFMT_DSP_B 5 /* L data MSB during FRM LRC */
|
|
#define SND_SOC_DAIFMT_AC97 6 /* AC97 */
|
|
#define SND_SOC_DAIFMT_PDM 7 /* Pulse density modulation */
|
|
|
|
/* left and right justified also known as MSB and LSB respectively */
|
|
#define SND_SOC_DAIFMT_MSB SND_SOC_DAIFMT_LEFT_J
|
|
#define SND_SOC_DAIFMT_LSB SND_SOC_DAIFMT_RIGHT_J
|
|
|
|
/*
|
|
* DAI hardware signal inversions.
|
|
*
|
|
* Specifies whether the DAI can also support inverted clocks for the specified
|
|
* format.
|
|
*/
|
|
#define SND_SOC_DAIFMT_NB_NF (1 << 8) /* normal bit clock + frame */
|
|
#define SND_SOC_DAIFMT_NB_IF (2 << 8) /* normal BCLK + inv FRM */
|
|
#define SND_SOC_DAIFMT_IB_NF (3 << 8) /* invert BCLK + nor FRM */
|
|
#define SND_SOC_DAIFMT_IB_IF (4 << 8) /* invert BCLK + FRM */
|
|
|
|
/*
|
|
* DAI hardware clock masters.
|
|
*
|
|
* This is wrt the codec, the inverse is true for the interface
|
|
* i.e. if the codec is clk and FRM master then the interface is
|
|
* clk and frame slave.
|
|
*/
|
|
#define SND_SOC_DAIFMT_CBM_CFM (1 << 12) /* codec clk & FRM master */
|
|
#define SND_SOC_DAIFMT_CBS_CFM (2 << 12) /* codec clk slave & FRM master */
|
|
#define SND_SOC_DAIFMT_CBM_CFS (3 << 12) /* codec clk master & frame slave */
|
|
#define SND_SOC_DAIFMT_CBS_CFS (4 << 12) /* codec clk & FRM slave */
|
|
|
|
#define SND_SOC_DAIFMT_FORMAT_MASK 0x000f
|
|
#define SND_SOC_DAIFMT_CLOCK_MASK 0x00f0
|
|
#define SND_SOC_DAIFMT_INV_MASK 0x0f00
|
|
#define SND_SOC_DAIFMT_MASTER_MASK 0xf000
|
|
|
|
/*
|
|
* Master Clock Directions
|
|
*/
|
|
#define SND_SOC_CLOCK_IN 0
|
|
#define SND_SOC_CLOCK_OUT 1
|
|
|
|
/* I2S Tx Control */
|
|
#define I2S_TX_ON 1
|
|
#define I2S_TX_OFF 0
|
|
|
|
#define FIFO_LENGTH 64
|
|
|
|
/* I2s Registers */
|
|
struct i2s_reg {
|
|
unsigned int con; /* base + 0 , Control register */
|
|
unsigned int mod; /* Mode register */
|
|
unsigned int fic; /* FIFO control register */
|
|
unsigned int psr; /* Reserved */
|
|
unsigned int txd; /* Transmit data register */
|
|
unsigned int rxd; /* Receive Data Register */
|
|
};
|
|
|
|
/* This structure stores the i2s related information */
|
|
struct i2s_uc_priv {
|
|
unsigned int rfs; /* LR clock frame size */
|
|
unsigned int bfs; /* Bit clock frame size */
|
|
unsigned int audio_pll_clk; /* Audio pll frequency in Hz */
|
|
unsigned int samplingrate; /* sampling rate */
|
|
unsigned int bitspersample; /* bits per sample */
|
|
unsigned int channels; /* audio channels */
|
|
unsigned int base_address; /* I2S Register Base */
|
|
unsigned int id; /* I2S controller id */
|
|
};
|
|
|
|
/* Operations for i2s devices */
|
|
struct i2s_ops {
|
|
/**
|
|
* tx_data() - Transmit audio data
|
|
*
|
|
* @dev: I2C device
|
|
* @data: Data buffer to play
|
|
* @data_size: Size of data buffer in bytes
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int (*tx_data)(struct udevice *dev, void *data, uint data_size);
|
|
};
|
|
|
|
#define i2s_get_ops(dev) ((struct i2s_ops *)(dev)->driver->ops)
|
|
|
|
/**
|
|
* i2s_tx_data() - Transmit audio data
|
|
*
|
|
* @dev: I2C device
|
|
* @data: Data buffer to play
|
|
* @data_size: Size of data buffer in bytes
|
|
* Return: 0 if OK, -ve on error
|
|
*/
|
|
int i2s_tx_data(struct udevice *dev, void *data, uint data_size);
|
|
|
|
/*
|
|
* Sends the given data through i2s tx
|
|
*
|
|
* @param pi2s_tx pointer of i2s transmitter parameter structure.
|
|
* @param data address of the data buffer
|
|
* @param data_size size of the data (in bytes)
|
|
* Return: int value 0 for success, -1 in case of error
|
|
*/
|
|
int i2s_transfer_tx_data(struct i2s_uc_priv *pi2s_tx, void *data,
|
|
uint data_size);
|
|
|
|
#endif /* __I2S_H__ */
|