You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
62 lines
2.1 KiB
62 lines
2.1 KiB
.. _module-pw_sys_io_baremetal_stm32f429:
|
|
|
|
-----------------------------
|
|
pw_sys_io_baremetal_stm32f429
|
|
-----------------------------
|
|
|
|
``pw_sys_io_baremetal_stm32f429`` implements the ``pw_sys_io`` facade over
|
|
UART.
|
|
|
|
The STM32F429 baremetal sys IO backend provides device startup code and a UART
|
|
driver layer that allows applications built against the ``pw_sys_io`` interface
|
|
to run on a STM32F429 chip and do simple input/output via UART. The code is
|
|
optimized for the STM32F429I-DISC1, using USART1 (which is connected to the
|
|
virtual COM port on the embedded ST-LINKv2 chip). However, this should work with
|
|
all STM32F429 variations (and even some STM32F4xx chips).
|
|
|
|
This backend has no configuration options. The point of it is to provide bare-
|
|
minimum platform code needed to do UART reads/writes.
|
|
|
|
Setup
|
|
=====
|
|
This module requires relatively minimal setup:
|
|
|
|
1. Write code against the ``pw_sys_io`` facade.
|
|
2. Specify the ``dir_pw_sys_io_backend`` GN global variable to point to this
|
|
backend.
|
|
3. Build an executable with a main() function using a toolchain that
|
|
supports Cortex-M4.
|
|
|
|
.. note::
|
|
This module provides early firmware init and a linker script, so it will
|
|
conflict with other modules that do any early device init or provide a linker
|
|
script.
|
|
|
|
Module usage
|
|
============
|
|
After building an executable that utilizes this backend, flash the
|
|
produced .elf binary to the development board. Then, using a serial
|
|
communication terminal like minicom/screen (Linux/Mac) or TeraTerm (Windows),
|
|
connect to the device at a baud rate of 115200 (8N1). If you're not using a
|
|
STM32F429I-DISC1 development board, manually connect a USB-to-serial TTL adapter
|
|
to pins ``PA9`` (MCU TX) and ``PA10`` (MCU RX), making sure to match logic
|
|
levels (e.g. 3.3V versus 1.8V).
|
|
|
|
Sample connection diagram
|
|
-------------------------
|
|
|
|
.. code-block:: text
|
|
|
|
--USB Serial--+ +-----STM32F429 MCU-----
|
|
| |
|
|
TX o--->o PA10/USART1_RX
|
|
| |
|
|
RX o<---o PA9/USART1_TX
|
|
| |
|
|
--------------+ +-----------------------
|
|
|
|
Dependencies
|
|
============
|
|
* ``pw_sys_io`` facade
|
|
* ``pw_preprocessor`` module
|