You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
351 lines
13 KiB
351 lines
13 KiB
## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn547)
|
|
## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn547)
|
|
###############################################################################
|
|
# Application options
|
|
# Logging Levels
|
|
# NXPLOG_DEFAULT_LOGLEVEL 0x01
|
|
# ANDROID_LOG_DEBUG 0x03
|
|
# ANDROID_LOG_WARN 0x02
|
|
# ANDROID_LOG_ERROR 0x01
|
|
# ANDROID_LOG_SILENT 0x00
|
|
NXPLOG_EXTNS_LOGLEVEL=0x01
|
|
NXPLOG_NCIHAL_LOGLEVEL=0x01
|
|
NXPLOG_NCIX_LOGLEVEL=0x01
|
|
NXPLOG_NCIR_LOGLEVEL=0x01
|
|
NXPLOG_FWDNLD_LOGLEVEL=0x01
|
|
NXPLOG_TML_LOGLEVEL=0x01
|
|
NFC_DEBUG_ENABLED=0x00
|
|
|
|
###############################################################################
|
|
# Nfc Device Node name
|
|
NXP_NFC_DEV_NODE="/dev/nq-nci"
|
|
|
|
###############################################################################
|
|
# Extension for Mifare reader enable
|
|
MIFARE_READER_ENABLE=0x01
|
|
|
|
###############################################################################
|
|
# Mifare Reader implementation
|
|
# 0: General implementation
|
|
# 1: Legacy implementation
|
|
LEGACY_MIFARE_READER=0
|
|
|
|
###############################################################################
|
|
# Firmware file type
|
|
#.so file 0x01
|
|
#.bin file 0x02
|
|
NXP_FW_TYPE=0x02
|
|
|
|
###############################################################################
|
|
# System clock source selection configuration
|
|
#define CLK_SRC_XTAL 1
|
|
#define CLK_SRC_PLL 2
|
|
NXP_SYS_CLK_SRC_SEL=0x01
|
|
|
|
###############################################################################
|
|
# System clock frequency selection configuration
|
|
#define CLK_FREQ_13MHZ 1
|
|
#define CLK_FREQ_19_2MHZ 2
|
|
#define CLK_FREQ_24MHZ 3
|
|
#define CLK_FREQ_26MHZ 4
|
|
#define CLK_FREQ_38_4MHZ 5
|
|
#define CLK_FREQ_52MHZ 6
|
|
NXP_SYS_CLK_FREQ_SEL=0x00
|
|
|
|
###############################################################################
|
|
# The timeout value to be used for clock request acknowledgment
|
|
# min value = 0x01 to max = 0x06
|
|
NXP_SYS_CLOCK_TO_CFG=0x01
|
|
|
|
###############################################################################
|
|
# NXP proprietary settings
|
|
NXP_ACT_PROP_EXTN={2F, 02, 00}
|
|
|
|
###############################################################################
|
|
# NFC forum profile settings
|
|
NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00}
|
|
|
|
###############################################################################
|
|
# NXP TVDD configurations settings
|
|
# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported,
|
|
# out of them only one can be configured at a time.
|
|
NXP_EXT_TVDD_CFG=0x02
|
|
|
|
###############################################################################
|
|
#config1:SLALM, 3.3V for both RM and CM
|
|
NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C}
|
|
|
|
###############################################################################
|
|
#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM,
|
|
#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms
|
|
NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, 82, 82, 00, BA, 1E, 10, 00, D0, 0C}
|
|
|
|
###############################################################################
|
|
# NXP RF configuration ALM/PLM settings
|
|
# This section needs to be updated with the correct values based on the platform
|
|
NXP_RF_CONF_BLK_1={
|
|
20, 02, 37, 06,
|
|
A0, 0D, 03, 24, 03, 80,
|
|
A0, 0D, 06, 08, 37, 28, 76, 00, 00,
|
|
A0, 0D, 06, 08, 42, 00, 02, FF, FF,
|
|
A0, 0D, 06, 06, 42, F8, 60, FF, FF,
|
|
A0, 0D, 06, 06, 35, F4, 05, 00, 03,
|
|
A0, 69, 09, 01, CF, 80, 00, 00, 07, 40, 00, 00
|
|
}
|
|
|
|
###############################################################################
|
|
# NXP RF configuration ALM/PLM settings
|
|
# This section needs to be updated with the correct values based on the platform
|
|
NXP_RF_CONF_BLK_2={
|
|
20, 02, 5B, 01, A0, 0B, 57, F2, 12, 90, 5A, 0F, 4E, 00, 47, 15, B7, AA, 47,
|
|
9F, A7, 99, 5C, 9F, 97, 99, 67, 9F, 97, 99, 69, 9F, 97, 00, 73, 9F, 07, 00,
|
|
75, 9F, 07, 00, 80, 9F, 07, 00, 84, 9F, 07, 00, 8D, 9F, 07, 00, 8F, 9F, 07,
|
|
00, 99, 9F, 04, 00, 9B, 9F, 04, 00, A6, 9F, 04, 00, A8, 9F, 04, 00, B2, 9F,
|
|
02, 00, BB, 9F, 00, 00, C1, 9F, 00, 00, CC, 9F, 00, 00, D6, 1F, 00, 00
|
|
}
|
|
|
|
###############################################################################
|
|
# NXP RF configuration ALM/PLM settings
|
|
# This section needs to be updated with the correct values based on the platform
|
|
NXP_RF_CONF_BLK_3={
|
|
20, 02, 10, 01, A0, AF, 0C, 83, 43, 7B, 80, 00, 83, 8B, 7B, 80, 00, 77, 08
|
|
}
|
|
|
|
###############################################################################
|
|
# NXP RF configuration ALM/PLM settings
|
|
# This section needs to be updated with the correct values based on the platform
|
|
NXP_RF_CONF_BLK_4={
|
|
20, 02, 98, 01, A0, 34, 94, 23, 04, 18, 35, 00, 00, 4B, 00, 00, 71, 00, 00,
|
|
71, 00, 00, 96, 00, 00, BC, 00, 00, BC, 00, 00, E1, 00, 00, 07, 01, 00, 07,
|
|
01, 00, 2C, 01, 00, 2C, 01, 00, 52, 01, 00, 52, 01, 00, 77, 01, 00, 77, 01,
|
|
00, C2, 01, 00, C2, 01, 00, 0D, 02, 00, 0D, 02, 00, 58, 02, 00, 58, 02, 00,
|
|
EE, 02, 00, EE, 02, 00, 18, BC, 00, 00, BC, 00, 00, BC, 00, 00, BC, 00, 00,
|
|
E1, 00, 00, E1, 00, 00, 2C, 01, 00, 2C, 01, 00, 2C, 01, 00, 2C, 01, 00, 2C,
|
|
01, 00, 77, 01, 00, 77, 01, 00, 77, 01, 00, 77, 01, 00, 77, 01, 00, 58, 02,
|
|
00, 58, 02, 00, DC, 05, 00, DC, 05, 00, DC, 05, 00, DC, 05, 00, DC, 05, 00,
|
|
DC, 05, 00
|
|
}
|
|
|
|
###############################################################################
|
|
# NXP RF configuration ALM/PLM settings
|
|
# This section needs to be updated with the correct values based on the platform
|
|
NXP_RF_CONF_BLK_5={
|
|
20, 02, A4, 01, A0, A9, A0, 00, C1, 00, 0A, 01, 80, 41, 0A, 02, 81, 83, 0A,
|
|
03, C0, 42, 06, 04, 80, 46, 06, 05, C3, 01, 03, 06, C2, 05, 03, 07, C2, 4A,
|
|
03, 07, 81, 01, 01, 08, C3, 8B, 03, 08, C3, 05, 01, 09, C3, 92, 03, 09, C6,
|
|
84, 01, 0A, C4, CC, 03, 0A, C6, 89, 01, 0B, C5, D4, 03, 0B, C7, 92, 01, 0C,
|
|
44, 00, 03, 0C, C7, C6, 01, 0D, 42, 04, 03, 0D, C9, CE, 01, 0E, 42, 48, 03,
|
|
0E, 03, 00, 01, 0F, 43, 50, 03, 0F, 43, 04, 01, 10, 43, 91, 03, 10, 45, 0A,
|
|
01, 11, 44, 95, 03, 11, 46, 11, 01, 12, 46, 8E, 01, 13, 47, C5, 01, 14, 48,
|
|
CC, 01, 15, 4B, D4, 01, 16, 4E, D7, 01, 17, 45, A2, 01, 18, 46, A6, 01, 19,
|
|
46, AE, 01, 1A, 47, B4, 01, 1B, 48, EA, 01, 1C, 49, F0, 01
|
|
}
|
|
|
|
###############################################################################
|
|
# NXP RF configuration ALM/PLM settings
|
|
# This section needs to be updated with the correct values based on the platform
|
|
NXP_RF_CONF_BLK_6={
|
|
20, 02, 0C, 01, A0, 18, 08, AC, 00, 28, 01, B2, FE, 9C, 00
|
|
}
|
|
|
|
###############################################################################
|
|
# Core configuration extensions
|
|
# It includes
|
|
# Wired mode settings A0ED, A0EE
|
|
# Tag Detector A040, A041, A043
|
|
# Low Power mode A007
|
|
# Clock settings A002, A003
|
|
# PbF settings A008
|
|
# Clock timeout settings A004
|
|
# eSE (SVDD) PWR REQ settings A0F2
|
|
# Window size A0D8
|
|
# DWP Speed A0D5
|
|
# How eSE connected to PN553 A012
|
|
# UICC2 bit rate A0D1
|
|
# SWP1A interface A0D4
|
|
# DWP intf behavior config, SVDD Load activated by default if set to 0x31 A037
|
|
# SPI CL Sync enable A098
|
|
NXP_CORE_CONF_EXTN={20, 02, 6B, 16,
|
|
A0, 06, 01, 01,
|
|
A0, EC, 01, 00,
|
|
A0, ED, 01, 01,
|
|
A0, 5E, 01, 01,
|
|
A0, 12, 01, 02,
|
|
A0, 40, 01, 01,
|
|
A0, 41, 01, 03,
|
|
A0, 43, 01, 50,
|
|
A0, D1, 01, 02,
|
|
A0, D4, 01, 00,
|
|
A0, 37, 01, 35,
|
|
A0, D8, 01, 02,
|
|
A0, D5, 01, 0A,
|
|
A0, 98, 01, 03,
|
|
A0, 9C, 02, 00, 00,
|
|
A0, AA, 04, F1, 03, EE, 02,
|
|
A0, 38, 04, 1A, 0B, 0B, 00,
|
|
A0, 3A, 08, 19, 00, 19, 00, 19, 00, 19, 00,
|
|
A0, B2, 01, 19,
|
|
A0, 91, 01, 01,
|
|
A0, 08, 02, 00, 00,
|
|
A0, 88, 04, 00, 96, 96, 03
|
|
}
|
|
|
|
###############################################################################
|
|
# Core configuration rf field filter settings to enable set to 01 to disable set
|
|
# to 00 last bit
|
|
NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00 }
|
|
|
|
###############################################################################
|
|
# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set
|
|
# to 0x00
|
|
NXP_I2C_FRAGMENTATION_ENABLED=0x00
|
|
|
|
###############################################################################
|
|
# Core configuration settings
|
|
NXP_CORE_CONF={ 20, 02, 2D, 0F,
|
|
85, 01, 01,
|
|
28, 01, 00,
|
|
21, 01, 00,
|
|
30, 01, 08,
|
|
31, 01, 03,
|
|
32, 01, 60,
|
|
38, 01, 01,
|
|
33, 00,
|
|
54, 01, 06,
|
|
50, 01, 02,
|
|
5B, 01, 00,
|
|
80, 01, 01,
|
|
81, 01, 01,
|
|
82, 01, 0E,
|
|
18, 01, 01
|
|
}
|
|
|
|
###############################################################################
|
|
#Enable SWP full power mode when phone is power off
|
|
NXP_SWP_FULL_PWR_ON=0x00
|
|
|
|
###############################################################################
|
|
#Set the default Felica T3T System Code OffHost route Location :
|
|
#This settings will be used when application does not set this parameter
|
|
# host 0x00
|
|
# eSE 0x01
|
|
# UICC 0x02
|
|
# UICC2 0x03
|
|
DEFAULT_SYS_CODE_ROUTE=0xC0
|
|
|
|
###############################################################################
|
|
# AID Matching platform options
|
|
# AID_MATCHING_L 0x01
|
|
# AID_MATCHING_K 0x02
|
|
AID_MATCHING_PLATFORM=0x01
|
|
|
|
###############################################################################
|
|
#CHINA_TIANJIN_RF_SETTING
|
|
#Enable 0x01
|
|
#Disable 0x00
|
|
NXP_CHINA_TIANJIN_RF_ENABLED=0x01
|
|
|
|
###############################################################################
|
|
#SWP_SWITCH_TIMEOUT_SETTING
|
|
# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60].
|
|
# Timeout in milliseconds, for example
|
|
# No Timeout 0x00
|
|
# 10 millisecond timeout 0x0A
|
|
NXP_SWP_SWITCH_TIMEOUT=0x0A
|
|
|
|
###############################################################################
|
|
# Enable or Disable RF_STATUS_UPDATE to EseHal module
|
|
# Disable 0x00
|
|
# Enable 0x01
|
|
RF_STATUS_UPDATE_ENABLE=0x00
|
|
|
|
###############################################################################
|
|
# Configure the single default SE to use. The default is to use the first
|
|
# SE that is detected by the stack. This value might be used when the phone
|
|
# supports multiple SE (e.g. 0xF3 and 0xF4) but you want to force it to use
|
|
# one of them (e.g. 0xF4).
|
|
DEFAULT_OFFHOST_ROUTE=0x80
|
|
|
|
###############################################################################
|
|
# Configure the single default SE to use. The default is to use the first
|
|
# SE that is detected by the stack. This value might be used when the phone
|
|
# supports multiple SE (e.g. 0xF3 and 0xF4) but you want to force it to use
|
|
# one of them (e.g. 0xF4).
|
|
DEFAULT_NFCF_ROUTE=0xC0
|
|
|
|
###############################################################################
|
|
# Configure the default NfcA/IsoDep techology and protocol route. Can be
|
|
# either a secure element (e.g. 0xF4) or the host (0x00)
|
|
DEFAULT_ROUTE=0x00
|
|
|
|
###############################################################################
|
|
# Vendor Specific Proprietary Protocol & Discovery Configuration
|
|
# Set to 0xFF if unsupported
|
|
# byte[0] NCI_PROTOCOL_18092_ACTIVE
|
|
# byte[1] NCI_PROTOCOL_B_PRIME
|
|
# byte[2] NCI_PROTOCOL_DUAL
|
|
# byte[3] NCI_PROTOCOL_15693
|
|
# byte[4] NCI_PROTOCOL_KOVIO
|
|
# byte[5] NCI_PROTOCOL_MIFARE
|
|
# byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
|
|
# byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
|
|
# byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
|
|
NFA_PROPRIETARY_CFG={05, FF, FF, 06, 81, 80, 70, FF, FF}
|
|
|
|
###############################################################################
|
|
# Bail out mode
|
|
# If set to 1, NFCC is using bail out mode for either Type A or Type B poll.
|
|
NFA_POLL_BAIL_OUT_MODE=0x01
|
|
|
|
###############################################################################
|
|
# White list of Hosts
|
|
# This values will be the Hosts(NFCEEs) in the HCI Network.
|
|
DEVICE_HOST_WHITE_LIST={C0, 02}
|
|
|
|
###############################################################################
|
|
# Extended APDU length for ISO_DEP
|
|
ISO_DEP_MAX_TRANSCEIVE=0xFEFF
|
|
|
|
###############################################################################
|
|
# Choose the presence-check algorithm for type-4 tag. If not defined, the default value is 1.
|
|
# 0 NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
|
|
# 1 NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
|
|
# 2 NFA_RW_PRES_CHK_ISO_DEP_NAK; Type - 4 tag protocol iso-dep nak presence check
|
|
# command is sent waiting for rsp and ntf.
|
|
PRESENCE_CHECK_ALGORITHM=2
|
|
###############################################################################
|
|
# Configure the NFC Extras to open and use a static pipe. If the value is
|
|
# not set or set to 0, then the default is use a dynamic pipe based on a
|
|
# destination gate (see NFA_HCI_DEFAULT_DEST_GATE). Note there is a value
|
|
# for each UICC (where F3="UICC0" and F4="UICC1")
|
|
OFF_HOST_ESE_PIPE_ID=0x16
|
|
OFF_HOST_SIM_PIPE_ID=0x0A
|
|
|
|
###############################################################################
|
|
#Set the Felica T3T System Code Power state :
|
|
#This settings will be used when application does not set this parameter
|
|
# bit pos 0 = Switch On
|
|
# bit pos 1 = Switch Off
|
|
# bit pos 2 = Battery Off
|
|
# bit pos 3 = Screen On lock
|
|
# bit pos 4 = Screen off unlock
|
|
# bit pos 5 = Screen Off lock
|
|
DEFAULT_SYS_CODE_PWR_STATE=0x3B
|
|
|
|
###############################################################################
|
|
# Configure the NFCEEIDs of offhost UICC.
|
|
# UICC 0x80 (UICC)
|
|
OFFHOST_ROUTE_UICC={80}
|
|
|
|
###############################################################################
|
|
# Configure the NFCEEIDs of offhost eSEs.
|
|
# eSE 0xC0 (eSE)
|
|
OFFHOST_ROUTE_ESE={C0}
|
|
|
|
###############################################################################
|
|
# Configure the list of NFCEE for the ISO-DEP routing.
|
|
# host 0x00
|
|
# eSE 0xC0 (eSE)
|
|
# UICC 0x80 (UICC)
|
|
DEFAULT_ISODEP_ROUTE=0x80
|