|
|
#Version check for XTRA
|
|
|
#DISABLE = 0
|
|
|
#AUTO = 1
|
|
|
#XTRA2 = 2
|
|
|
#XTRA3 = 3
|
|
|
XTRA_VERSION_CHECK=0
|
|
|
|
|
|
# Error Estimate
|
|
|
# _SET = 1
|
|
|
# _CLEAR = 0
|
|
|
ERR_ESTIMATE=0
|
|
|
|
|
|
#NTP server
|
|
|
NTP_SERVER = time.google.com
|
|
|
|
|
|
#XTRA CA path
|
|
|
XTRA_CA_PATH=/usr/lib/ssl-1.1/certs
|
|
|
|
|
|
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
|
|
|
# 4 - Debug, 5 - Verbose
|
|
|
# If DEBUG_LEVEL is commented, Android's logging levels will be used
|
|
|
DEBUG_LEVEL = 2
|
|
|
|
|
|
# Intermediate position report, 1=enable, 0=disable
|
|
|
INTERMEDIATE_POS=0
|
|
|
|
|
|
# supl version 1.0
|
|
|
#SUPL_VER=0x10000
|
|
|
|
|
|
# Emergency SUPL, 1=enable, 0=disable
|
|
|
SUPL_ES=1
|
|
|
|
|
|
#Choose PDN for Emergency SUPL
|
|
|
#1 - Use emergency PDN
|
|
|
#0 - Use regular SUPL PDN for Emergency SUPL
|
|
|
#USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
|
|
|
|
|
|
#SUPL_MODE is a bit mask set in config.xml per carrier by default.
|
|
|
#If it is uncommented here, this value will overwrite the value from
|
|
|
#config.xml.
|
|
|
#MSA=0X2
|
|
|
#MSB=0X1
|
|
|
#SUPL_MODE=
|
|
|
|
|
|
# GPS Capabilities bit mask
|
|
|
# SCHEDULING = 0x01
|
|
|
# MSB = 0x02
|
|
|
# MSA = 0x04
|
|
|
# ON_DEMAND_TIME = 0x10
|
|
|
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING
|
|
|
CAPABILITIES=0x17
|
|
|
|
|
|
# Accuracy threshold for intermediate positions
|
|
|
# less accurate positions are ignored, 0 for passing all positions
|
|
|
# ACCURACY_THRES=5000
|
|
|
|
|
|
################################
|
|
|
##### AGPS server settings #####
|
|
|
################################
|
|
|
|
|
|
# FOR SUPL SUPPORT, set the following
|
|
|
# SUPL_HOST=supl.host.com or IP
|
|
|
# SUPL_PORT=1234
|
|
|
|
|
|
# FOR MO SUPL SUPPORT, set the following
|
|
|
# MO_SUPL_HOST=supl.host.com or IP
|
|
|
# MO_SUPL_PORT=1234
|
|
|
|
|
|
# FOR C2K PDE SUPPORT, set the following
|
|
|
# C2K_HOST=c2k.pde.com or IP
|
|
|
# C2K_PORT=1234
|
|
|
|
|
|
# Bitmask of slots that are available
|
|
|
# for write/install to, where 1s indicate writable,
|
|
|
# and the default value is 0 where no slots
|
|
|
# are writable. For example, AGPS_CERT_WRITABLE_MASK
|
|
|
# of b1000001010 makes 3 slots available
|
|
|
# and the remaining 7 slots unwritable.
|
|
|
#AGPS_CERT_WRITABLE_MASK=0
|
|
|
|
|
|
####################################
|
|
|
# LTE Positioning Profile Settings
|
|
|
####################################
|
|
|
# 0: Enable RRLP on LTE(Default)
|
|
|
# 1: Enable LPP_User_Plane on LTE
|
|
|
# 2: Enable LPP_Control_Plane
|
|
|
# 3: Enable both LPP_User_Plane and LPP_Control_Plane
|
|
|
#LPP_PROFILE = 2
|
|
|
|
|
|
####################################
|
|
|
#Datum Type
|
|
|
####################################
|
|
|
# 0: WGS-84
|
|
|
# 1: PZ-90
|
|
|
DATUM_TYPE = 0
|
|
|
|
|
|
################################
|
|
|
# EXTRA SETTINGS
|
|
|
################################
|
|
|
# NMEA provider (1=Modem Processor, 0=Application Processor)
|
|
|
NMEA_PROVIDER=0
|
|
|
# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
|
|
|
SGLTE_TARGET=0
|
|
|
|
|
|
##################################################
|
|
|
# Select Positioning Protocol on A-GLONASS system
|
|
|
##################################################
|
|
|
# 0x1: RRC CPlane
|
|
|
# 0x2: RRLP UPlane
|
|
|
# 0x4: LLP Uplane
|
|
|
#A_GLONASS_POS_PROTOCOL_SELECT = 0
|
|
|
|
|
|
##################################################
|
|
|
# Select technology for LPPe Control Plane
|
|
|
##################################################
|
|
|
# 0x1: DBH for LPPe CP
|
|
|
# 0x2: WLAN AP Measurements for LPPe CP
|
|
|
# 0x4: SRN AP measurement for CP
|
|
|
# 0x8: Sensor Barometer Measurement LPPe CP
|
|
|
#LPPE_CP_TECHNOLOGY = 0
|
|
|
|
|
|
##################################################
|
|
|
# Select technology for LPPe User Plane
|
|
|
##################################################
|
|
|
# 0x1: DBH for LPPe UP
|
|
|
# 0x2: WLAN AP Measurements for LPPe UP
|
|
|
# 0x4: SRN AP measurement for UP
|
|
|
# 0x8: Sensor Barometer Measurement LPPe UP
|
|
|
#LPPE_UP_TECHNOLOGY = 0
|
|
|
|
|
|
##################################################
|
|
|
# AGPS_CONFIG_INJECT
|
|
|
##################################################
|
|
|
# enable/disable injection of AGPS configurations:
|
|
|
# SUPL_VER
|
|
|
# SUPL_HOST
|
|
|
# SUPL_PORT
|
|
|
# MO_SUPL_HOST
|
|
|
# MO_SUPL_PORT
|
|
|
# C2K_HOST
|
|
|
# C2K_PORT
|
|
|
# LPP_PROFILE
|
|
|
# A_GLONASS_POS_PROTOCOL_SELECT
|
|
|
# 0: disable
|
|
|
# 1: enable
|
|
|
AGPS_CONFIG_INJECT = 1
|
|
|
|
|
|
##################################################
|
|
|
# GNSS settings for automotive use cases
|
|
|
# Configurations in following section are
|
|
|
# specific to automotive use cases, others
|
|
|
# please do not change, keep the default values
|
|
|
##################################################
|
|
|
|
|
|
# AP Coarse Timestamp Uncertainty
|
|
|
##################################################
|
|
|
# default : 10
|
|
|
# AP time stamp uncertainty, until GNSS receiver
|
|
|
# is able to acquire better timing information
|
|
|
AP_TIMESTAMP_UNCERTAINTY = 10
|
|
|
|
|
|
##################################################
|
|
|
# QDR engine availability status
|
|
|
##################################################
|
|
|
# 0 : NO QDR (default)
|
|
|
# 1 : QDR enabled
|
|
|
# This settings enables QDR Configuration for
|
|
|
# automotive use case, if enabled then
|
|
|
# DR_AP_Service needs to be enabled in izat.conf
|
|
|
#EXTERNAL_DR_ENABLED = 0
|
|
|
|
|
|
#####################################
|
|
|
# DR_SYNC Pulse Availability
|
|
|
#####################################
|
|
|
# 0 : DR_SYNC pulse not available (default)
|
|
|
# 1 : DR_SYNC pulse available
|
|
|
# This configuration enables the driver to make use
|
|
|
# of PPS events generated by DR_SYNC pulse
|
|
|
# Standard Linux PPS driver needs to be enabled
|
|
|
DR_SYNC_ENABLED = 0
|
|
|
|
|
|
#####################################
|
|
|
# PPS Device name
|
|
|
#####################################
|
|
|
PPS_DEVICENAME = /dev/pps0
|
|
|
|
|
|
#####################################
|
|
|
# Ignore PPS at Startup and after long outage
|
|
|
#####################################
|
|
|
IGNORE_PPS_PULSE_COUNT = 1
|
|
|
|
|
|
#####################################
|
|
|
# Long GNSS RF outage in seconds
|
|
|
#####################################
|
|
|
GNSS_OUTAGE_DURATION = 10
|
|
|
|
|
|
#####################################
|
|
|
# AP Clock Accuracy
|
|
|
#####################################
|
|
|
# Quality of APPS processor clock (in PPM).
|
|
|
# Value specified is used for calculation of
|
|
|
# APPS time stamp uncertainty
|
|
|
AP_CLOCK_PPM = 100
|
|
|
|
|
|
#####################################
|
|
|
# MAX ms difference to detect missing pulse
|
|
|
#####################################
|
|
|
# Specifies time threshold in ms to validate any missing PPS pulses
|
|
|
MISSING_PULSE_TIME_DELTA = 900
|
|
|
|
|
|
#####################################
|
|
|
# Propagation time uncertainty
|
|
|
#####################################
|
|
|
# This settings enables time uncertainty propagation
|
|
|
# logic incase of missing PPS pulse
|
|
|
PROPAGATION_TIME_UNCERTAINTY = 1
|
|
|
|
|
|
#######################################
|
|
|
# APN / IP Type Configuration
|
|
|
# APN and IP Type to use for setting
|
|
|
# up WWAN call.
|
|
|
# Use below values for IP Type:
|
|
|
# v4 = 4
|
|
|
# v6 = 6
|
|
|
# v4v6 = 10
|
|
|
#######################################
|
|
|
# INTERNET_APN = abc.xyz
|
|
|
# INTERNET_IP_TYPE = 4
|
|
|
# SUPL_APN = abc.xyz
|
|
|
# SUPL_IP_TYPE = 4
|
|
|
|
|
|
#####################################
|
|
|
# Modem type
|
|
|
#####################################
|
|
|
# This setting configures modem type
|
|
|
# (external=0 or internal=1)
|
|
|
# comment out the next line to vote
|
|
|
# for the first modem in the list
|
|
|
MODEM_TYPE = 1
|
|
|
|
|
|
##################################################
|
|
|
# CONSTRAINED TIME UNCERTAINTY MODE
|
|
|
##################################################
|
|
|
# 0 : disabled (default)
|
|
|
# 1 : enabled
|
|
|
# This setting enables GPS engine to keep its time
|
|
|
# uncertainty below the specified constraint
|
|
|
#CONSTRAINED_TIME_UNCERTAINTY_ENABLED = 0
|
|
|
|
|
|
# If constrained time uncertainty mode is enabled,
|
|
|
# this setting specifies the time uncertainty
|
|
|
# threshold that gps engine need to maintain.
|
|
|
# In unit of milli-seconds.
|
|
|
# Default is 0.0 meaning that modem default value
|
|
|
# of time uncertainty threshold will be used.
|
|
|
#CONSTRAINED_TIME_UNCERTAINTY_THRESHOLD = 0.0
|
|
|
|
|
|
# If constrained time uncertainty mode is enabled,
|
|
|
# this setting specifies the power budget that
|
|
|
# gps engine is allowed to spend to maintain the time
|
|
|
# uncertainty.
|
|
|
# Default is 0 meaning that GPS engine is not constained
|
|
|
# by power budget and can spend as much power as needed.
|
|
|
# In unit of 0.1 milli watt second.
|
|
|
#CONSTRAINED_TIME_UNCERTAINTY_ENERGY_BUDGET = 0
|
|
|
|
|
|
##################################################
|
|
|
# POSITION ASSISTED CLOCK ESTIMATOR
|
|
|
##################################################
|
|
|
# 0 : disabled (default)
|
|
|
# 1 : enabled
|
|
|
# This setting enables GPS engine to estimate clock
|
|
|
# bias and drift when the signal from at least 1
|
|
|
# SV is available and the UE<55>s position is known by
|
|
|
# other position engines.
|
|
|
#POSITION_ASSISTED_CLOCK_ESTIMATOR_ENABLED = 0
|
|
|
|
|
|
#####################################
|
|
|
# proxyAppPackageName
|
|
|
#####################################
|
|
|
# This is a string that is sent to the framework
|
|
|
# in nfwNotifyCb callback
|
|
|
PROXY_APP_PACKAGE_NAME = com.google.android.carrierlocation
|
|
|
|
|
|
#####################################
|
|
|
# CP_MTLR_ES
|
|
|
#####################################
|
|
|
# CP MTLR ES, 1=enable, 0=disable
|
|
|
CP_MTLR_ES=1
|
|
|
|
|
|
##################################################
|
|
|
# GNSS_DEPLOYMENT
|
|
|
##################################################
|
|
|
# 0 : Enable QTI GNSS (default)
|
|
|
# 1 : Enable QCSR SS5
|
|
|
# This setting use to select between QTI GNSS
|
|
|
# and QCSR SS5 hardware receiver.
|
|
|
# By default QTI GNSS receiver is enabled.
|
|
|
# GNSS_DEPLOYMENT = 0
|
