You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
322 lines
10 KiB
322 lines
10 KiB
/*
|
|
* Copyright (c) 2016-2019, STMicroelectronics - All Rights Reserved
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
#ifndef STM32_I2C_H
|
|
#define STM32_I2C_H
|
|
|
|
#include <stdint.h>
|
|
|
|
#include <lib/utils_def.h>
|
|
|
|
/* Bit definition for I2C_CR1 register */
|
|
#define I2C_CR1_PE BIT(0)
|
|
#define I2C_CR1_TXIE BIT(1)
|
|
#define I2C_CR1_RXIE BIT(2)
|
|
#define I2C_CR1_ADDRIE BIT(3)
|
|
#define I2C_CR1_NACKIE BIT(4)
|
|
#define I2C_CR1_STOPIE BIT(5)
|
|
#define I2C_CR1_TCIE BIT(6)
|
|
#define I2C_CR1_ERRIE BIT(7)
|
|
#define I2C_CR1_DNF GENMASK(11, 8)
|
|
#define I2C_CR1_ANFOFF BIT(12)
|
|
#define I2C_CR1_SWRST BIT(13)
|
|
#define I2C_CR1_TXDMAEN BIT(14)
|
|
#define I2C_CR1_RXDMAEN BIT(15)
|
|
#define I2C_CR1_SBC BIT(16)
|
|
#define I2C_CR1_NOSTRETCH BIT(17)
|
|
#define I2C_CR1_WUPEN BIT(18)
|
|
#define I2C_CR1_GCEN BIT(19)
|
|
#define I2C_CR1_SMBHEN BIT(22)
|
|
#define I2C_CR1_SMBDEN BIT(21)
|
|
#define I2C_CR1_ALERTEN BIT(22)
|
|
#define I2C_CR1_PECEN BIT(23)
|
|
|
|
/* Bit definition for I2C_CR2 register */
|
|
#define I2C_CR2_SADD GENMASK(9, 0)
|
|
#define I2C_CR2_RD_WRN BIT(10)
|
|
#define I2C_CR2_RD_WRN_OFFSET 10U
|
|
#define I2C_CR2_ADD10 BIT(11)
|
|
#define I2C_CR2_HEAD10R BIT(12)
|
|
#define I2C_CR2_START BIT(13)
|
|
#define I2C_CR2_STOP BIT(14)
|
|
#define I2C_CR2_NACK BIT(15)
|
|
#define I2C_CR2_NBYTES GENMASK(23, 16)
|
|
#define I2C_CR2_NBYTES_OFFSET 16U
|
|
#define I2C_CR2_RELOAD BIT(24)
|
|
#define I2C_CR2_AUTOEND BIT(25)
|
|
#define I2C_CR2_PECBYTE BIT(26)
|
|
|
|
/* Bit definition for I2C_OAR1 register */
|
|
#define I2C_OAR1_OA1 GENMASK(9, 0)
|
|
#define I2C_OAR1_OA1MODE BIT(10)
|
|
#define I2C_OAR1_OA1EN BIT(15)
|
|
|
|
/* Bit definition for I2C_OAR2 register */
|
|
#define I2C_OAR2_OA2 GENMASK(7, 1)
|
|
#define I2C_OAR2_OA2MSK GENMASK(10, 8)
|
|
#define I2C_OAR2_OA2NOMASK 0
|
|
#define I2C_OAR2_OA2MASK01 BIT(8)
|
|
#define I2C_OAR2_OA2MASK02 BIT(9)
|
|
#define I2C_OAR2_OA2MASK03 GENMASK(9, 8)
|
|
#define I2C_OAR2_OA2MASK04 BIT(10)
|
|
#define I2C_OAR2_OA2MASK05 (BIT(8) | BIT(10))
|
|
#define I2C_OAR2_OA2MASK06 (BIT(9) | BIT(10))
|
|
#define I2C_OAR2_OA2MASK07 GENMASK(10, 8)
|
|
#define I2C_OAR2_OA2EN BIT(15)
|
|
|
|
/* Bit definition for I2C_TIMINGR register */
|
|
#define I2C_TIMINGR_SCLL GENMASK(7, 0)
|
|
#define I2C_TIMINGR_SCLH GENMASK(15, 8)
|
|
#define I2C_TIMINGR_SDADEL GENMASK(19, 16)
|
|
#define I2C_TIMINGR_SCLDEL GENMASK(23, 20)
|
|
#define I2C_TIMINGR_PRESC GENMASK(31, 28)
|
|
|
|
/* Bit definition for I2C_TIMEOUTR register */
|
|
#define I2C_TIMEOUTR_TIMEOUTA GENMASK(11, 0)
|
|
#define I2C_TIMEOUTR_TIDLE BIT(12)
|
|
#define I2C_TIMEOUTR_TIMOUTEN BIT(15)
|
|
#define I2C_TIMEOUTR_TIMEOUTB GENMASK(27, 16)
|
|
#define I2C_TIMEOUTR_TEXTEN BIT(31)
|
|
|
|
/* Bit definition for I2C_ISR register */
|
|
#define I2C_ISR_TXE BIT(0)
|
|
#define I2C_ISR_TXIS BIT(1)
|
|
#define I2C_ISR_RXNE BIT(2)
|
|
#define I2C_ISR_ADDR BIT(3)
|
|
#define I2C_ISR_NACKF BIT(4)
|
|
#define I2C_ISR_STOPF BIT(5)
|
|
#define I2C_ISR_TC BIT(6)
|
|
#define I2C_ISR_TCR BIT(7)
|
|
#define I2C_ISR_BERR BIT(8)
|
|
#define I2C_ISR_ARLO BIT(9)
|
|
#define I2C_ISR_OVR BIT(10)
|
|
#define I2C_ISR_PECERR BIT(11)
|
|
#define I2C_ISR_TIMEOUT BIT(12)
|
|
#define I2C_ISR_ALERT BIT(13)
|
|
#define I2C_ISR_BUSY BIT(15)
|
|
#define I2C_ISR_DIR BIT(16)
|
|
#define I2C_ISR_ADDCODE GENMASK(23, 17)
|
|
|
|
/* Bit definition for I2C_ICR register */
|
|
#define I2C_ICR_ADDRCF BIT(3)
|
|
#define I2C_ICR_NACKCF BIT(4)
|
|
#define I2C_ICR_STOPCF BIT(5)
|
|
#define I2C_ICR_BERRCF BIT(8)
|
|
#define I2C_ICR_ARLOCF BIT(9)
|
|
#define I2C_ICR_OVRCF BIT(10)
|
|
#define I2C_ICR_PECCF BIT(11)
|
|
#define I2C_ICR_TIMOUTCF BIT(12)
|
|
#define I2C_ICR_ALERTCF BIT(13)
|
|
|
|
enum i2c_speed_e {
|
|
I2C_SPEED_STANDARD, /* 100 kHz */
|
|
I2C_SPEED_FAST, /* 400 kHz */
|
|
I2C_SPEED_FAST_PLUS, /* 1 MHz */
|
|
};
|
|
|
|
#define STANDARD_RATE 100000
|
|
#define FAST_RATE 400000
|
|
#define FAST_PLUS_RATE 1000000
|
|
|
|
struct stm32_i2c_init_s {
|
|
uint32_t own_address1; /*
|
|
* Specifies the first device own
|
|
* address. This parameter can be a
|
|
* 7-bit or 10-bit address.
|
|
*/
|
|
|
|
uint32_t addressing_mode; /*
|
|
* Specifies if 7-bit or 10-bit
|
|
* addressing mode is selected.
|
|
* This parameter can be a value of
|
|
* @ref I2C_ADDRESSING_MODE.
|
|
*/
|
|
|
|
uint32_t dual_address_mode; /*
|
|
* Specifies if dual addressing mode is
|
|
* selected.
|
|
* This parameter can be a value of @ref
|
|
* I2C_DUAL_ADDRESSING_MODE.
|
|
*/
|
|
|
|
uint32_t own_address2; /*
|
|
* Specifies the second device own
|
|
* address if dual addressing mode is
|
|
* selected. This parameter can be a
|
|
* 7-bit address.
|
|
*/
|
|
|
|
uint32_t own_address2_masks; /*
|
|
* Specifies the acknowledge mask
|
|
* address second device own address
|
|
* if dual addressing mode is selected
|
|
* This parameter can be a value of @ref
|
|
* I2C_OWN_ADDRESS2_MASKS.
|
|
*/
|
|
|
|
uint32_t general_call_mode; /*
|
|
* Specifies if general call mode is
|
|
* selected.
|
|
* This parameter can be a value of @ref
|
|
* I2C_GENERAL_CALL_ADDRESSING_MODE.
|
|
*/
|
|
|
|
uint32_t no_stretch_mode; /*
|
|
* Specifies if nostretch mode is
|
|
* selected.
|
|
* This parameter can be a value of @ref
|
|
* I2C_NOSTRETCH_MODE.
|
|
*/
|
|
|
|
uint32_t rise_time; /*
|
|
* Specifies the SCL clock pin rising
|
|
* time in nanoseconds.
|
|
*/
|
|
|
|
uint32_t fall_time; /*
|
|
* Specifies the SCL clock pin falling
|
|
* time in nanoseconds.
|
|
*/
|
|
|
|
enum i2c_speed_e speed_mode; /*
|
|
* Specifies the I2C clock source
|
|
* frequency mode.
|
|
* This parameter can be a value of @ref
|
|
* i2c_speed_mode_e.
|
|
*/
|
|
|
|
int analog_filter; /*
|
|
* Specifies if the I2C analog noise
|
|
* filter is selected.
|
|
* This parameter can be 0 (filter
|
|
* off), all other values mean filter
|
|
* on.
|
|
*/
|
|
|
|
uint8_t digital_filter_coef; /*
|
|
* Specifies the I2C digital noise
|
|
* filter coefficient.
|
|
* This parameter can be a value
|
|
* between 0 and
|
|
* STM32_I2C_DIGITAL_FILTER_MAX.
|
|
*/
|
|
};
|
|
|
|
enum i2c_state_e {
|
|
I2C_STATE_RESET = 0x00U, /* Not yet initialized */
|
|
I2C_STATE_READY = 0x20U, /* Ready for use */
|
|
I2C_STATE_BUSY = 0x24U, /* Internal process ongoing */
|
|
I2C_STATE_BUSY_TX = 0x21U, /* Data Transmission ongoing */
|
|
I2C_STATE_BUSY_RX = 0x22U, /* Data Reception ongoing */
|
|
};
|
|
|
|
enum i2c_mode_e {
|
|
I2C_MODE_NONE = 0x00U, /* No active communication */
|
|
I2C_MODE_MASTER = 0x10U, /* Communication in Master Mode */
|
|
I2C_MODE_SLAVE = 0x20U, /* Communication in Slave Mode */
|
|
I2C_MODE_MEM = 0x40U /* Communication in Memory Mode */
|
|
|
|
};
|
|
|
|
#define I2C_ERROR_NONE 0x00000000U /* No error */
|
|
#define I2C_ERROR_BERR 0x00000001U /* BERR error */
|
|
#define I2C_ERROR_ARLO 0x00000002U /* ARLO error */
|
|
#define I2C_ERROR_AF 0x00000004U /* ACKF error */
|
|
#define I2C_ERROR_OVR 0x00000008U /* OVR error */
|
|
#define I2C_ERROR_DMA 0x00000010U /* DMA transfer error */
|
|
#define I2C_ERROR_TIMEOUT 0x00000020U /* Timeout error */
|
|
#define I2C_ERROR_SIZE 0x00000040U /* Size Management error */
|
|
|
|
struct i2c_handle_s {
|
|
uint32_t i2c_base_addr; /* Registers base address */
|
|
unsigned int dt_status; /* DT nsec/sec status */
|
|
unsigned int clock; /* Clock reference */
|
|
uint8_t lock; /* Locking object */
|
|
enum i2c_state_e i2c_state; /* Communication state */
|
|
enum i2c_mode_e i2c_mode; /* Communication mode */
|
|
uint32_t i2c_err; /* Error code */
|
|
};
|
|
|
|
#define I2C_ADDRESSINGMODE_7BIT 0x00000001U
|
|
#define I2C_ADDRESSINGMODE_10BIT 0x00000002U
|
|
|
|
#define I2C_DUALADDRESS_DISABLE 0x00000000U
|
|
#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN
|
|
|
|
#define I2C_GENERALCALL_DISABLE 0x00000000U
|
|
#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN
|
|
|
|
#define I2C_NOSTRETCH_DISABLE 0x00000000U
|
|
#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
|
|
|
|
#define I2C_MEMADD_SIZE_8BIT 0x00000001U
|
|
#define I2C_MEMADD_SIZE_16BIT 0x00000002U
|
|
|
|
#define I2C_RELOAD_MODE I2C_CR2_RELOAD
|
|
#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND
|
|
#define I2C_SOFTEND_MODE 0x00000000U
|
|
|
|
#define I2C_NO_STARTSTOP 0x00000000U
|
|
#define I2C_GENERATE_STOP (BIT(31) | I2C_CR2_STOP)
|
|
#define I2C_GENERATE_START_READ (BIT(31) | I2C_CR2_START | \
|
|
I2C_CR2_RD_WRN)
|
|
#define I2C_GENERATE_START_WRITE (BIT(31) | I2C_CR2_START)
|
|
|
|
#define I2C_FLAG_TXE I2C_ISR_TXE
|
|
#define I2C_FLAG_TXIS I2C_ISR_TXIS
|
|
#define I2C_FLAG_RXNE I2C_ISR_RXNE
|
|
#define I2C_FLAG_ADDR I2C_ISR_ADDR
|
|
#define I2C_FLAG_AF I2C_ISR_NACKF
|
|
#define I2C_FLAG_STOPF I2C_ISR_STOPF
|
|
#define I2C_FLAG_TC I2C_ISR_TC
|
|
#define I2C_FLAG_TCR I2C_ISR_TCR
|
|
#define I2C_FLAG_BERR I2C_ISR_BERR
|
|
#define I2C_FLAG_ARLO I2C_ISR_ARLO
|
|
#define I2C_FLAG_OVR I2C_ISR_OVR
|
|
#define I2C_FLAG_PECERR I2C_ISR_PECERR
|
|
#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT
|
|
#define I2C_FLAG_ALERT I2C_ISR_ALERT
|
|
#define I2C_FLAG_BUSY I2C_ISR_BUSY
|
|
#define I2C_FLAG_DIR I2C_ISR_DIR
|
|
|
|
#define I2C_RESET_CR2 (I2C_CR2_SADD | I2C_CR2_HEAD10R | \
|
|
I2C_CR2_NBYTES | I2C_CR2_RELOAD | \
|
|
I2C_CR2_RD_WRN)
|
|
|
|
#define I2C_TIMEOUT_BUSY_MS 25U
|
|
|
|
#define I2C_ANALOGFILTER_ENABLE 0x00000000U
|
|
#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF
|
|
|
|
/* STM32 specific defines */
|
|
#define STM32_I2C_RISE_TIME_DEFAULT 25 /* ns */
|
|
#define STM32_I2C_FALL_TIME_DEFAULT 10 /* ns */
|
|
#define STM32_I2C_SPEED_DEFAULT I2C_SPEED_STANDARD
|
|
#define STM32_I2C_ANALOG_FILTER_DELAY_MIN 50 /* ns */
|
|
#define STM32_I2C_ANALOG_FILTER_DELAY_MAX 260 /* ns */
|
|
#define STM32_I2C_DIGITAL_FILTER_MAX 16
|
|
|
|
int stm32_i2c_get_setup_from_fdt(void *fdt, int node,
|
|
struct stm32_i2c_init_s *init);
|
|
int stm32_i2c_init(struct i2c_handle_s *hi2c,
|
|
struct stm32_i2c_init_s *init_data);
|
|
int stm32_i2c_mem_write(struct i2c_handle_s *hi2c, uint16_t dev_addr,
|
|
uint16_t mem_addr, uint16_t mem_add_size,
|
|
uint8_t *p_data, uint16_t size, uint32_t timeout_ms);
|
|
int stm32_i2c_mem_read(struct i2c_handle_s *hi2c, uint16_t dev_addr,
|
|
uint16_t mem_addr, uint16_t mem_add_size,
|
|
uint8_t *p_data, uint16_t size, uint32_t timeout_ms);
|
|
int stm32_i2c_master_transmit(struct i2c_handle_s *hi2c, uint16_t dev_addr,
|
|
uint8_t *p_data, uint16_t size,
|
|
uint32_t timeout_ms);
|
|
int stm32_i2c_master_receive(struct i2c_handle_s *hi2c, uint16_t dev_addr,
|
|
uint8_t *p_data, uint16_t size,
|
|
uint32_t timeout_ms);
|
|
bool stm32_i2c_is_device_ready(struct i2c_handle_s *hi2c, uint16_t dev_addr,
|
|
uint32_t trials, uint32_t timeout_ms);
|
|
|
|
#endif /* STM32_I2C_H */
|