You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
95 lines
3.3 KiB
95 lines
3.3 KiB
/*
|
|
* Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
#ifndef UART_16550_H
|
|
#define UART_16550_H
|
|
|
|
#include <drivers/console.h>
|
|
|
|
/* UART16550 Registers */
|
|
#define UARTTX 0x0
|
|
#define UARTRX 0x0
|
|
#define UARTDLL 0x0
|
|
#define UARTIER 0x4
|
|
#define UARTDLLM 0x4
|
|
#define UARTIIR 0x8
|
|
#define UARTFCR 0x8
|
|
#define UARTLCR 0xc
|
|
#define UARTMCR 0x10
|
|
#define UARTLSR 0x14
|
|
#define UARTMSR 0x18
|
|
#define UARTSPR 0x1c
|
|
#define UARTCSR 0x20
|
|
/* Some instances have MDR1 defined as well */
|
|
#define UARTMDR1 0x20
|
|
#define UARTRXFIFOCFG 0x24
|
|
#define UARTMIE 0x28
|
|
#define UARTVNDR 0x2c
|
|
#define UARTASR 0x3c
|
|
|
|
/* FIFO Control Register bits */
|
|
#define UARTFCR_FIFOMD_16450 (0 << 6)
|
|
#define UARTFCR_FIFOMD_16550 (1 << 6)
|
|
#define UARTFCR_RXTRIG_1 (0 << 6)
|
|
#define UARTFCR_RXTRIG_4 (1 << 6)
|
|
#define UARTFCR_RXTRIG_8 (2 << 6)
|
|
#define UARTFCR_RXTRIG_16 (3 << 6)
|
|
#define UARTFCR_TXTRIG_1 (0 << 4)
|
|
#define UARTFCR_TXTRIG_4 (1 << 4)
|
|
#define UARTFCR_TXTRIG_8 (2 << 4)
|
|
#define UARTFCR_TXTRIG_16 (3 << 4)
|
|
#define UARTFCR_DMAEN (1 << 3) /* Enable DMA mode */
|
|
#define UARTFCR_TXCLR (1 << 2) /* Clear contents of Tx FIFO */
|
|
#define UARTFCR_RXCLR (1 << 1) /* Clear contents of Rx FIFO */
|
|
#define UARTFCR_FIFOEN (1 << 0) /* Enable the Tx/Rx FIFO */
|
|
|
|
/* Line Control Register bits */
|
|
#define UARTLCR_DLAB (1 << 7) /* Divisor Latch Access */
|
|
#define UARTLCR_SETB (1 << 6) /* Set BREAK Condition */
|
|
#define UARTLCR_SETP (1 << 5) /* Set Parity to LCR[4] */
|
|
#define UARTLCR_EVEN (1 << 4) /* Even Parity Format */
|
|
#define UARTLCR_PAR (1 << 3) /* Parity */
|
|
#define UARTLCR_STOP (1 << 2) /* Stop Bit */
|
|
#define UARTLCR_WORDSZ_5 0 /* Word Length of 5 */
|
|
#define UARTLCR_WORDSZ_6 1 /* Word Length of 6 */
|
|
#define UARTLCR_WORDSZ_7 2 /* Word Length of 7 */
|
|
#define UARTLCR_WORDSZ_8 3 /* Word Length of 8 */
|
|
|
|
/* Line Status Register bits */
|
|
#define UARTLSR_RXFIFOEMT (1 << 9) /* Rx Fifo Empty */
|
|
#define UARTLSR_TXFIFOFULL (1 << 8) /* Tx Fifo Full */
|
|
#define UARTLSR_RXFIFOERR (1 << 7) /* Rx Fifo Error */
|
|
#define UARTLSR_TEMT (1 << 6) /* Tx Shift Register Empty */
|
|
#define UARTLSR_THRE (1 << 5) /* Tx Holding Register Empty */
|
|
#define UARTLSR_BRK (1 << 4) /* Break Condition Detected */
|
|
#define UARTLSR_FERR (1 << 3) /* Framing Error */
|
|
#define UARTLSR_PERR (1 << 3) /* Parity Error */
|
|
#define UARTLSR_OVRF (1 << 2) /* Rx Overrun Error */
|
|
#define UARTLSR_RDR_BIT (0) /* Rx Data Ready Bit */
|
|
#define UARTLSR_RDR (1 << UARTLSR_RDR_BIT) /* Rx Data Ready */
|
|
|
|
#ifndef __ASSEMBLER__
|
|
|
|
#include <stdint.h>
|
|
|
|
/*
|
|
* Initialize a new 16550 console instance and register it with the console
|
|
* framework. The |console| pointer must point to storage that will be valid
|
|
* for the lifetime of the console, such as a global or static local variable.
|
|
* Its contents will be reinitialized from scratch.
|
|
* When |clock| has a value of 0, the UART will *not* be initialised. This
|
|
* means the UART should already be enabled and the baudrate and clock setup
|
|
* should have been done already, either by platform specific code or by
|
|
* previous firmware stages. The |baud| parameter will be ignored in this
|
|
* case as well.
|
|
*/
|
|
int console_16550_register(uintptr_t baseaddr, uint32_t clock, uint32_t baud,
|
|
console_t *console);
|
|
|
|
#endif /*__ASSEMBLER__*/
|
|
|
|
#endif /* UART_16550_H */
|