You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

131 lines
3.7 KiB

/*
* Copyright (C) 2017 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* Test program to select the CardManager and request the card production
* lifcycle data (CPLC).
*/
#include <stdint.h>
#include <stdio.h>
#include <unistd.h>
#include <ese/ese.h>
ESE_INCLUDE_HW(ESE_HW_NXP_PN80T_NQ_NCI);
/* APDU: CLA INS P1-P2 Lc Data Le */
struct Apdu {
uint32_t length;
const uint8_t *bytes;
const char *desc;
};
struct ApduSession {
uint32_t count;
const char *desc;
const struct Apdu *apdus[];
};
const uint8_t kSelectCardManagerBytes[] = {0x00, 0xA4, 0x04, 0x00, 0x00};
/* Implicitly selects the ISD at A0 00 00 01 51 00 00 */
const struct Apdu kSelectCardManager = {
.length = sizeof(kSelectCardManagerBytes),
.bytes = &kSelectCardManagerBytes[0],
.desc = "SELECT CARD MANAGER",
};
const uint8_t kGetCplcBytes[] = {0x80, 0xCA, 0x9F, 0x7F, 0x00};
const struct Apdu kGetCplc = {
.length = sizeof(kGetCplcBytes),
.bytes = &kGetCplcBytes[0],
.desc = "GET CPLC",
};
const struct ApduSession kGetCplcSession = {
.count = 2,
.desc = "GET-CPLC",
.apdus =
{
&kSelectCardManager, &kGetCplc,
},
};
const struct ApduSession kEmptySession = {
.count = 0, .desc = "Empty session (hw close only)", .apdus = {},
};
/* Define the loader service sessions here! */
const uint8_t kSelectJcopIdentifyBytes[] = {
0x00, 0xA4, 0x04, 0x00, 0x09, 0xA0, 0x00,
0x00, 0x01, 0x67, 0x41, 0x30, 0x00, 0xFF,
};
const struct Apdu kSelectJcopIdentify = {
.length = sizeof(kSelectJcopIdentifyBytes),
.bytes = &kSelectJcopIdentifyBytes[0],
.desc = "SELECT JCOP IDENTIFY",
};
const struct ApduSession *kSessions[] = {
&kGetCplcSession, &kEmptySession,
};
int main() {
struct EseInterface ese = ESE_INITIALIZER(ESE_HW_NXP_PN80T_NQ_NCI);
void *ese_hw_open_data = NULL;
size_t s = 0;
for (; s < sizeof(kSessions) / sizeof(kSessions[0]); ++s) {
int recvd;
uint32_t apdu_index = 0;
uint8_t rx_buf[1024];
if (ese_open(&ese, ese_hw_open_data) < 0) {
printf("Cannot open hw\n");
if (ese_error(&ese))
printf("eSE error (%d): %s\n", ese_error_code(&ese),
ese_error_message(&ese));
return 1;
}
printf("Running session %s\n", kSessions[s]->desc);
for (; apdu_index < kSessions[s]->count; ++apdu_index) {
uint32_t i;
const struct Apdu *apdu = kSessions[s]->apdus[apdu_index];
printf("Sending APDU %u: %s\n", apdu_index, apdu->desc);
printf("Sending %u bytes to card\n", apdu->length);
printf("TX: ");
for (i = 0; i < apdu->length; ++i)
printf("%.2X ", apdu->bytes[i]);
printf("\n");
recvd = ese_transceive(&ese, (uint8_t *)apdu->bytes, apdu->length, rx_buf,
sizeof(rx_buf));
if (ese_error(&ese)) {
printf("An error (%d) occurred: %s", ese_error_code(&ese),
ese_error_message(&ese));
return -1;
}
if (recvd > 0) {
int i;
printf("Read %d bytes from card\n", recvd);
printf("RX: ");
for (i = 0; i < recvd; ++i)
printf("%.2X ", rx_buf[i]);
printf("\n");
}
usleep(1000);
}
printf("Session completed\n\n");
ese_close(&ese);
}
return 0;
}