You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
444 lines
13 KiB
444 lines
13 KiB
#!/bin/bash
|
|
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# Check xfrm policy resolution. Topology:
|
|
#
|
|
# 1.2 1.1 3.1 3.10 2.1 2.2
|
|
# eth1 eth1 veth0 veth0 eth1 eth1
|
|
# ns1 ---- ns3 ----- ns4 ---- ns2
|
|
#
|
|
# ns3 and ns4 are connected via ipsec tunnel.
|
|
# pings from ns1 to ns2 (and vice versa) are supposed to work like this:
|
|
# ns1: ping 10.0.2.2: passes via ipsec tunnel.
|
|
# ns2: ping 10.0.1.2: passes via ipsec tunnel.
|
|
|
|
# ns1: ping 10.0.1.253: passes via ipsec tunnel (direct policy)
|
|
# ns2: ping 10.0.2.253: passes via ipsec tunnel (direct policy)
|
|
#
|
|
# ns1: ping 10.0.2.254: does NOT pass via ipsec tunnel (exception)
|
|
# ns2: ping 10.0.1.254: does NOT pass via ipsec tunnel (exception)
|
|
|
|
# Kselftest framework requirement - SKIP code is 4.
|
|
ksft_skip=4
|
|
ret=0
|
|
policy_checks_ok=1
|
|
|
|
KEY_SHA=0xdeadbeef1234567890abcdefabcdefabcdefabcd
|
|
KEY_AES=0x0123456789abcdef0123456789012345
|
|
SPI1=0x1
|
|
SPI2=0x2
|
|
|
|
do_esp_policy() {
|
|
local ns=$1
|
|
local me=$2
|
|
local remote=$3
|
|
local lnet=$4
|
|
local rnet=$5
|
|
|
|
# to encrypt packets as they go out (includes forwarded packets that need encapsulation)
|
|
ip -net $ns xfrm policy add src $lnet dst $rnet dir out tmpl src $me dst $remote proto esp mode tunnel priority 100 action allow
|
|
# to fwd decrypted packets after esp processing:
|
|
ip -net $ns xfrm policy add src $rnet dst $lnet dir fwd tmpl src $remote dst $me proto esp mode tunnel priority 100 action allow
|
|
}
|
|
|
|
do_esp() {
|
|
local ns=$1
|
|
local me=$2
|
|
local remote=$3
|
|
local lnet=$4
|
|
local rnet=$5
|
|
local spi_out=$6
|
|
local spi_in=$7
|
|
|
|
ip -net $ns xfrm state add src $remote dst $me proto esp spi $spi_in enc aes $KEY_AES auth sha1 $KEY_SHA mode tunnel sel src $rnet dst $lnet
|
|
ip -net $ns xfrm state add src $me dst $remote proto esp spi $spi_out enc aes $KEY_AES auth sha1 $KEY_SHA mode tunnel sel src $lnet dst $rnet
|
|
|
|
do_esp_policy $ns $me $remote $lnet $rnet
|
|
}
|
|
|
|
# add policies with different netmasks, to make sure kernel carries
|
|
# the policies contained within new netmask over when search tree is
|
|
# re-built.
|
|
# peer netns that are supposed to be encapsulated via esp have addresses
|
|
# in the 10.0.1.0/24 and 10.0.2.0/24 subnets, respectively.
|
|
#
|
|
# Adding a policy for '10.0.1.0/23' will make it necessary to
|
|
# alter the prefix of 10.0.1.0 subnet.
|
|
# In case new prefix overlaps with existing node, the node and all
|
|
# policies it carries need to be merged with the existing one(s).
|
|
#
|
|
# Do that here.
|
|
do_overlap()
|
|
{
|
|
local ns=$1
|
|
|
|
# adds new nodes to tree (neither network exists yet in policy database).
|
|
ip -net $ns xfrm policy add src 10.1.0.0/24 dst 10.0.0.0/24 dir fwd priority 200 action block
|
|
|
|
# adds a new node in the 10.0.0.0/24 tree (dst node exists).
|
|
ip -net $ns xfrm policy add src 10.2.0.0/24 dst 10.0.0.0/24 dir fwd priority 200 action block
|
|
|
|
# adds a 10.2.0.0/23 node, but for different dst.
|
|
ip -net $ns xfrm policy add src 10.2.0.0/23 dst 10.0.1.0/24 dir fwd priority 200 action block
|
|
|
|
# dst now overlaps with the 10.0.1.0/24 ESP policy in fwd.
|
|
# kernel must 'promote' existing one (10.0.0.0/24) to 10.0.0.0/23.
|
|
# But 10.0.0.0/23 also includes existing 10.0.1.0/24, so that node
|
|
# also has to be merged too, including source-sorted subtrees.
|
|
# old:
|
|
# 10.0.0.0/24 (node 1 in dst tree of the bin)
|
|
# 10.1.0.0/24 (node in src tree of dst node 1)
|
|
# 10.2.0.0/24 (node in src tree of dst node 1)
|
|
# 10.0.1.0/24 (node 2 in dst tree of the bin)
|
|
# 10.0.2.0/24 (node in src tree of dst node 2)
|
|
# 10.2.0.0/24 (node in src tree of dst node 2)
|
|
#
|
|
# The next 'policy add' adds dst '10.0.0.0/23', which means
|
|
# that dst node 1 and dst node 2 have to be merged including
|
|
# the sub-tree. As no duplicates are allowed, policies in
|
|
# the two '10.0.2.0/24' are also merged.
|
|
#
|
|
# after the 'add', internal search tree should look like this:
|
|
# 10.0.0.0/23 (node in dst tree of bin)
|
|
# 10.0.2.0/24 (node in src tree of dst node)
|
|
# 10.1.0.0/24 (node in src tree of dst node)
|
|
# 10.2.0.0/24 (node in src tree of dst node)
|
|
#
|
|
# 10.0.0.0/24 and 10.0.1.0/24 nodes have been merged as 10.0.0.0/23.
|
|
ip -net $ns xfrm policy add src 10.1.0.0/24 dst 10.0.0.0/23 dir fwd priority 200 action block
|
|
|
|
# similar to above: add policies (with partially random address), with shrinking prefixes.
|
|
for p in 29 28 27;do
|
|
for k in $(seq 1 32); do
|
|
ip -net $ns xfrm policy add src 10.253.1.$((RANDOM%255))/$p dst 10.254.1.$((RANDOM%255))/$p dir fwd priority $((200+k)) action block 2>/dev/null
|
|
done
|
|
done
|
|
}
|
|
|
|
do_esp_policy_get_check() {
|
|
local ns=$1
|
|
local lnet=$2
|
|
local rnet=$3
|
|
|
|
ip -net $ns xfrm policy get src $lnet dst $rnet dir out > /dev/null
|
|
if [ $? -ne 0 ] && [ $policy_checks_ok -eq 1 ] ;then
|
|
policy_checks_ok=0
|
|
echo "FAIL: ip -net $ns xfrm policy get src $lnet dst $rnet dir out"
|
|
ret=1
|
|
fi
|
|
|
|
ip -net $ns xfrm policy get src $rnet dst $lnet dir fwd > /dev/null
|
|
if [ $? -ne 0 ] && [ $policy_checks_ok -eq 1 ] ;then
|
|
policy_checks_ok=0
|
|
echo "FAIL: ip -net $ns xfrm policy get src $rnet dst $lnet dir fwd"
|
|
ret=1
|
|
fi
|
|
}
|
|
|
|
do_exception() {
|
|
local ns=$1
|
|
local me=$2
|
|
local remote=$3
|
|
local encryptip=$4
|
|
local plain=$5
|
|
|
|
# network $plain passes without tunnel
|
|
ip -net $ns xfrm policy add dst $plain dir out priority 10 action allow
|
|
|
|
# direct policy for $encryptip, use tunnel, higher prio takes precedence
|
|
ip -net $ns xfrm policy add dst $encryptip dir out tmpl src $me dst $remote proto esp mode tunnel priority 1 action allow
|
|
}
|
|
|
|
# policies that are not supposed to match any packets generated in this test.
|
|
do_dummies4() {
|
|
local ns=$1
|
|
|
|
for i in $(seq 10 16);do
|
|
# dummy policy with wildcard src/dst.
|
|
echo netns exec $ns ip xfrm policy add src 0.0.0.0/0 dst 10.$i.99.0/30 dir out action block
|
|
echo netns exec $ns ip xfrm policy add src 10.$i.99.0/30 dst 0.0.0.0/0 dir out action block
|
|
for j in $(seq 32 64);do
|
|
echo netns exec $ns ip xfrm policy add src 10.$i.1.0/30 dst 10.$i.$j.0/30 dir out action block
|
|
# silly, as it encompasses the one above too, but its allowed:
|
|
echo netns exec $ns ip xfrm policy add src 10.$i.1.0/29 dst 10.$i.$j.0/29 dir out action block
|
|
# and yet again, even more broad one.
|
|
echo netns exec $ns ip xfrm policy add src 10.$i.1.0/24 dst 10.$i.$j.0/24 dir out action block
|
|
echo netns exec $ns ip xfrm policy add src 10.$i.$j.0/24 dst 10.$i.1.0/24 dir fwd action block
|
|
done
|
|
done | ip -batch /dev/stdin
|
|
}
|
|
|
|
do_dummies6() {
|
|
local ns=$1
|
|
|
|
for i in $(seq 10 16);do
|
|
for j in $(seq 32 64);do
|
|
echo netns exec $ns ip xfrm policy add src dead:$i::/64 dst dead:$i:$j::/64 dir out action block
|
|
echo netns exec $ns ip xfrm policy add src dead:$i:$j::/64 dst dead:$i::/24 dir fwd action block
|
|
done
|
|
done | ip -batch /dev/stdin
|
|
}
|
|
|
|
check_ipt_policy_count()
|
|
{
|
|
ns=$1
|
|
|
|
ip netns exec $ns iptables-save -c |grep policy | ( read c rest
|
|
ip netns exec $ns iptables -Z
|
|
if [ x"$c" = x'[0:0]' ]; then
|
|
exit 0
|
|
elif [ x"$c" = x ]; then
|
|
echo "ERROR: No counters"
|
|
ret=1
|
|
exit 111
|
|
else
|
|
exit 1
|
|
fi
|
|
)
|
|
}
|
|
|
|
check_xfrm() {
|
|
# 0: iptables -m policy rule count == 0
|
|
# 1: iptables -m policy rule count != 0
|
|
rval=$1
|
|
ip=$2
|
|
lret=0
|
|
|
|
ip netns exec ns1 ping -q -c 1 10.0.2.$ip > /dev/null
|
|
|
|
check_ipt_policy_count ns3
|
|
if [ $? -ne $rval ] ; then
|
|
lret=1
|
|
fi
|
|
check_ipt_policy_count ns4
|
|
if [ $? -ne $rval ] ; then
|
|
lret=1
|
|
fi
|
|
|
|
ip netns exec ns2 ping -q -c 1 10.0.1.$ip > /dev/null
|
|
|
|
check_ipt_policy_count ns3
|
|
if [ $? -ne $rval ] ; then
|
|
lret=1
|
|
fi
|
|
check_ipt_policy_count ns4
|
|
if [ $? -ne $rval ] ; then
|
|
lret=1
|
|
fi
|
|
|
|
return $lret
|
|
}
|
|
|
|
check_exceptions()
|
|
{
|
|
logpostfix="$1"
|
|
local lret=0
|
|
|
|
# ping to .254 should be excluded from the tunnel (exception is in place).
|
|
check_xfrm 0 254
|
|
if [ $? -ne 0 ]; then
|
|
echo "FAIL: expected ping to .254 to fail ($logpostfix)"
|
|
lret=1
|
|
else
|
|
echo "PASS: ping to .254 bypassed ipsec tunnel ($logpostfix)"
|
|
fi
|
|
|
|
# ping to .253 should use use ipsec due to direct policy exception.
|
|
check_xfrm 1 253
|
|
if [ $? -ne 0 ]; then
|
|
echo "FAIL: expected ping to .253 to use ipsec tunnel ($logpostfix)"
|
|
lret=1
|
|
else
|
|
echo "PASS: direct policy matches ($logpostfix)"
|
|
fi
|
|
|
|
# ping to .2 should use ipsec.
|
|
check_xfrm 1 2
|
|
if [ $? -ne 0 ]; then
|
|
echo "FAIL: expected ping to .2 to use ipsec tunnel ($logpostfix)"
|
|
lret=1
|
|
else
|
|
echo "PASS: policy matches ($logpostfix)"
|
|
fi
|
|
|
|
return $lret
|
|
}
|
|
|
|
check_hthresh_repeat()
|
|
{
|
|
local log=$1
|
|
i=0
|
|
|
|
for i in $(seq 1 10);do
|
|
ip -net ns1 xfrm policy update src e000:0001::0000 dst ff01::0014:0000:0001 dir in tmpl src :: dst :: proto esp mode tunnel priority 100 action allow || break
|
|
ip -net ns1 xfrm policy set hthresh6 0 28 || break
|
|
|
|
ip -net ns1 xfrm policy update src e000:0001::0000 dst ff01::01 dir in tmpl src :: dst :: proto esp mode tunnel priority 100 action allow || break
|
|
ip -net ns1 xfrm policy set hthresh6 0 28 || break
|
|
done
|
|
|
|
if [ $i -ne 10 ] ;then
|
|
echo "FAIL: $log" 1>&2
|
|
ret=1
|
|
return 1
|
|
fi
|
|
|
|
echo "PASS: $log"
|
|
return 0
|
|
}
|
|
|
|
#check for needed privileges
|
|
if [ "$(id -u)" -ne 0 ];then
|
|
echo "SKIP: Need root privileges"
|
|
exit $ksft_skip
|
|
fi
|
|
|
|
ip -Version 2>/dev/null >/dev/null
|
|
if [ $? -ne 0 ];then
|
|
echo "SKIP: Could not run test without the ip tool"
|
|
exit $ksft_skip
|
|
fi
|
|
|
|
# needed to check if policy lookup got valid ipsec result
|
|
iptables --version 2>/dev/null >/dev/null
|
|
if [ $? -ne 0 ];then
|
|
echo "SKIP: Could not run test without iptables tool"
|
|
exit $ksft_skip
|
|
fi
|
|
|
|
for i in 1 2 3 4; do
|
|
ip netns add ns$i
|
|
ip -net ns$i link set lo up
|
|
done
|
|
|
|
DEV=veth0
|
|
ip link add $DEV netns ns1 type veth peer name eth1 netns ns3
|
|
ip link add $DEV netns ns2 type veth peer name eth1 netns ns4
|
|
|
|
ip link add $DEV netns ns3 type veth peer name veth0 netns ns4
|
|
|
|
DEV=veth0
|
|
for i in 1 2; do
|
|
ip -net ns$i link set $DEV up
|
|
ip -net ns$i addr add 10.0.$i.2/24 dev $DEV
|
|
ip -net ns$i addr add dead:$i::2/64 dev $DEV
|
|
|
|
ip -net ns$i addr add 10.0.$i.253 dev $DEV
|
|
ip -net ns$i addr add 10.0.$i.254 dev $DEV
|
|
ip -net ns$i addr add dead:$i::fd dev $DEV
|
|
ip -net ns$i addr add dead:$i::fe dev $DEV
|
|
done
|
|
|
|
for i in 3 4; do
|
|
ip -net ns$i link set eth1 up
|
|
ip -net ns$i link set veth0 up
|
|
done
|
|
|
|
ip -net ns1 route add default via 10.0.1.1
|
|
ip -net ns2 route add default via 10.0.2.1
|
|
|
|
ip -net ns3 addr add 10.0.1.1/24 dev eth1
|
|
ip -net ns3 addr add 10.0.3.1/24 dev veth0
|
|
ip -net ns3 addr add 2001:1::1/64 dev eth1
|
|
ip -net ns3 addr add 2001:3::1/64 dev veth0
|
|
|
|
ip -net ns3 route add default via 10.0.3.10
|
|
|
|
ip -net ns4 addr add 10.0.2.1/24 dev eth1
|
|
ip -net ns4 addr add 10.0.3.10/24 dev veth0
|
|
ip -net ns4 addr add 2001:2::1/64 dev eth1
|
|
ip -net ns4 addr add 2001:3::10/64 dev veth0
|
|
ip -net ns4 route add default via 10.0.3.1
|
|
|
|
for j in 4 6; do
|
|
for i in 3 4;do
|
|
ip netns exec ns$i sysctl net.ipv$j.conf.eth1.forwarding=1 > /dev/null
|
|
ip netns exec ns$i sysctl net.ipv$j.conf.veth0.forwarding=1 > /dev/null
|
|
done
|
|
done
|
|
|
|
# abuse iptables rule counter to check if ping matches a policy
|
|
ip netns exec ns3 iptables -p icmp -A FORWARD -m policy --dir out --pol ipsec
|
|
ip netns exec ns4 iptables -p icmp -A FORWARD -m policy --dir out --pol ipsec
|
|
if [ $? -ne 0 ];then
|
|
echo "SKIP: Could not insert iptables rule"
|
|
for i in 1 2 3 4;do ip netns del ns$i;done
|
|
exit $ksft_skip
|
|
fi
|
|
|
|
# localip remoteip localnet remotenet
|
|
do_esp ns3 10.0.3.1 10.0.3.10 10.0.1.0/24 10.0.2.0/24 $SPI1 $SPI2
|
|
do_esp ns3 dead:3::1 dead:3::10 dead:1::/64 dead:2::/64 $SPI1 $SPI2
|
|
do_esp ns4 10.0.3.10 10.0.3.1 10.0.2.0/24 10.0.1.0/24 $SPI2 $SPI1
|
|
do_esp ns4 dead:3::10 dead:3::1 dead:2::/64 dead:1::/64 $SPI2 $SPI1
|
|
|
|
do_dummies4 ns3
|
|
do_dummies6 ns4
|
|
|
|
do_esp_policy_get_check ns3 10.0.1.0/24 10.0.2.0/24
|
|
do_esp_policy_get_check ns4 10.0.2.0/24 10.0.1.0/24
|
|
do_esp_policy_get_check ns3 dead:1::/64 dead:2::/64
|
|
do_esp_policy_get_check ns4 dead:2::/64 dead:1::/64
|
|
|
|
# ping to .254 should use ipsec, exception is not installed.
|
|
check_xfrm 1 254
|
|
if [ $? -ne 0 ]; then
|
|
echo "FAIL: expected ping to .254 to use ipsec tunnel"
|
|
ret=1
|
|
else
|
|
echo "PASS: policy before exception matches"
|
|
fi
|
|
|
|
# installs exceptions
|
|
# localip remoteip encryptdst plaindst
|
|
do_exception ns3 10.0.3.1 10.0.3.10 10.0.2.253 10.0.2.240/28
|
|
do_exception ns4 10.0.3.10 10.0.3.1 10.0.1.253 10.0.1.240/28
|
|
|
|
do_exception ns3 dead:3::1 dead:3::10 dead:2::fd dead:2:f0::/96
|
|
do_exception ns4 dead:3::10 dead:3::1 dead:1::fd dead:1:f0::/96
|
|
|
|
check_exceptions "exceptions"
|
|
if [ $? -ne 0 ]; then
|
|
ret=1
|
|
fi
|
|
|
|
# insert block policies with adjacent/overlapping netmasks
|
|
do_overlap ns3
|
|
|
|
check_exceptions "exceptions and block policies"
|
|
if [ $? -ne 0 ]; then
|
|
ret=1
|
|
fi
|
|
|
|
for n in ns3 ns4;do
|
|
ip -net $n xfrm policy set hthresh4 28 24 hthresh6 126 125
|
|
sleep $((RANDOM%5))
|
|
done
|
|
|
|
check_exceptions "exceptions and block policies after hresh changes"
|
|
|
|
# full flush of policy db, check everything gets freed incl. internal meta data
|
|
ip -net ns3 xfrm policy flush
|
|
|
|
do_esp_policy ns3 10.0.3.1 10.0.3.10 10.0.1.0/24 10.0.2.0/24
|
|
do_exception ns3 10.0.3.1 10.0.3.10 10.0.2.253 10.0.2.240/28
|
|
|
|
# move inexact policies to hash table
|
|
ip -net ns3 xfrm policy set hthresh4 16 16
|
|
|
|
sleep $((RANDOM%5))
|
|
check_exceptions "exceptions and block policies after hthresh change in ns3"
|
|
|
|
# restore original hthresh settings -- move policies back to tables
|
|
for n in ns3 ns4;do
|
|
ip -net $n xfrm policy set hthresh4 32 32 hthresh6 128 128
|
|
sleep $((RANDOM%5))
|
|
done
|
|
check_exceptions "exceptions and block policies after htresh change to normal"
|
|
|
|
check_hthresh_repeat "policies with repeated htresh change"
|
|
|
|
for i in 1 2 3 4;do ip netns del ns$i;done
|
|
|
|
exit $ret
|