You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
690 lines
26 KiB
690 lines
26 KiB
/*
|
|
* Copyright 2016 The Android Open Source Project
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the "License");
|
|
* you may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*/
|
|
|
|
package android.hardware.wifi.supplicant@1.0;
|
|
|
|
import ISupplicantIface;
|
|
import ISupplicantP2pIfaceCallback;
|
|
|
|
/**
|
|
* Interface exposed by the supplicant for each P2P mode network
|
|
* interface (e.g p2p0) it controls.
|
|
*/
|
|
interface ISupplicantP2pIface extends ISupplicantIface {
|
|
enum WpsProvisionMethod : uint32_t {
|
|
/**
|
|
* Push button method.
|
|
*/
|
|
PBC,
|
|
/**
|
|
* Display pin method configuration - pin is generated and displayed on
|
|
* device.
|
|
*/
|
|
DISPLAY,
|
|
/**
|
|
* Keypad pin method configuration - pin is entered on device.
|
|
*/
|
|
KEYPAD
|
|
};
|
|
|
|
/**
|
|
* Use to specify a range of frequencies.
|
|
* For example: 2412-2432,2462,5000-6000, etc.
|
|
*/
|
|
struct FreqRange {
|
|
uint32_t min;
|
|
uint32_t max;
|
|
};
|
|
|
|
/**
|
|
* Enum describing the modes of Miracast supported
|
|
* via driver commands.
|
|
*/
|
|
enum MiracastMode : uint8_t {
|
|
DISABLED = 0,
|
|
/**
|
|
* Operating as source.
|
|
*/
|
|
SOURCE = 1,
|
|
/**
|
|
* Operating as sink.
|
|
*/
|
|
SINK = 2
|
|
};
|
|
|
|
/**
|
|
* Register for callbacks from this interface.
|
|
*
|
|
* These callbacks are invoked for events that are specific to this interface.
|
|
* Registration of multiple callback objects is supported. These objects must
|
|
* be automatically deleted when the corresponding client process is dead or
|
|
* if this interface is removed.
|
|
*
|
|
* @param callback An instance of the |ISupplicantP2pIfaceCallback| HIDL
|
|
* interface object.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
registerCallback(ISupplicantP2pIfaceCallback callback)
|
|
generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Gets the MAC address of the device.
|
|
*
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
* @return deviceAddress MAC address of the device.
|
|
*/
|
|
getDeviceAddress()
|
|
generates (SupplicantStatus status, MacAddress deviceAddress);
|
|
|
|
/**
|
|
* Set the postfix to be used for P2P SSID's.
|
|
*
|
|
* @param postfix String to be appended to SSID.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
setSsidPostfix(vec<uint8_t> postfix) generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Set the Maximum idle time in seconds for P2P groups.
|
|
* This value controls how long a P2P group is maintained after there
|
|
* is no other members in the group. As a group owner, this means no
|
|
* associated stations in the group. As a P2P client, this means no
|
|
* group owner seen in scan results.
|
|
*
|
|
* @param groupIfName Group interface name to use.
|
|
* @param timeoutInSec Timeout value in seconds.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
setGroupIdle(string groupIfName, uint32_t timeoutInSec)
|
|
generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Turn on/off power save mode for the interface.
|
|
*
|
|
* @param groupIfName Group interface name to use.
|
|
* @param enable Indicate if power save is to be turned on/off.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_DISABLED|
|
|
*/
|
|
setPowerSave(string groupIfName, bool enable)
|
|
generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Initiate a P2P service discovery with an optional timeout.
|
|
*
|
|
* @param timeoutInSec Max time to be spent is peforming discovery.
|
|
* Set to 0 to indefinely continue discovery untill and explicit
|
|
* |stopFind| is sent.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
* |SupplicantStatusCode.FAILURE_IFACE_DISABLED|
|
|
*/
|
|
find(uint32_t timeoutInSec) generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Stop an ongoing P2P service discovery.
|
|
*
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
* |SupplicantStatusCode.FAILURE_IFACE_DISABLED|
|
|
*/
|
|
stopFind() generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Flush P2P peer table and state.
|
|
*
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
flush() generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Start P2P group formation with a discovered P2P peer. This includes
|
|
* optional group owner negotiation, group interface setup, provisioning,
|
|
* and establishing data connection.
|
|
*
|
|
* @param peerAddress MAC address of the device to connect to.
|
|
* @method provisionMethod Provisioning method to use.
|
|
* @param preSelectedPin Pin to be used, if |provisionMethod| uses one of the
|
|
* preselected |PIN*| methods.
|
|
* @param joinExistingGroup Indicates that this is a command to join an
|
|
* existing group as a client. It skips the group owner negotiation
|
|
* part. This must send a Provision Discovery Request message to the
|
|
* target group owner before associating for WPS provisioning.
|
|
* @param persistent Used to request a persistent group to be formed.
|
|
* @param goIntent Used to override the default Intent for this group owner
|
|
* negotiation (Values from 1-15). Refer to section 4.1.6 in
|
|
* Wi-Fi Peer-to-Peer (P2P) Technical Specification Version 1.7.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
* @return generatedPin Pin generated, if |provisionMethod| uses one of the
|
|
* generated |PIN*| methods.
|
|
*/
|
|
connect(MacAddress peerAddress,
|
|
WpsProvisionMethod provisionMethod,
|
|
string preSelectedPin,
|
|
bool joinExistingGroup,
|
|
bool persistent,
|
|
uint32_t goIntent)
|
|
generates (SupplicantStatus status, string generatedPin);
|
|
|
|
/**
|
|
* Cancel an ongoing P2P group formation and joining-a-group related
|
|
* operation. This operation unauthorizes the specific peer device (if any
|
|
* had been authorized to start group formation), stops P2P find (if in
|
|
* progress), stops pending operations for join-a-group, and removes the
|
|
* P2P group interface (if one was used) that is in the WPS provisioning
|
|
* step. If the WPS provisioning step has been completed, the group is not
|
|
* terminated.
|
|
*
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_NOT_STARTED|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
cancelConnect() generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Send P2P provision discovery request to the specified peer. The
|
|
* parameters for this command are the P2P device address of the peer and the
|
|
* desired configuration method.
|
|
*
|
|
* @param peerAddress MAC address of the device to send discovery.
|
|
* @method provisionMethod Provisioning method to use.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
provisionDiscovery(MacAddress peerAddress,
|
|
WpsProvisionMethod provisionMethod)
|
|
generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Set up a P2P group owner manually (i.e., without group owner
|
|
* negotiation with a specific peer). This is also known as autonomous
|
|
* group owner. Optional |persistentNetworkId| may be used to specify
|
|
* restart of a persistent group.
|
|
*
|
|
* @param persistent Used to request a persistent group to be formed.
|
|
* @param persistentNetworkId Used to specify the restart of a persistent
|
|
* group. Set to UINT32_MAX for a non-persistent group.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
addGroup(bool persistent, SupplicantNetworkId persistentNetworkId)
|
|
generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Terminate a P2P group. If a new virtual network interface was used for
|
|
* the group, it must also be removed. The network interface name of the
|
|
* group interface is used as a parameter for this command.
|
|
*
|
|
* @param groupIfName Group interface name to use.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
removeGroup(string groupIfName) generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Reject connection attempt from a peer (specified with a device
|
|
* address). This is a mechanism to reject a pending group owner negotiation
|
|
* with a peer and request to automatically block any further connection or
|
|
* discovery of the peer.
|
|
*
|
|
* @param peerAddress MAC address of the device to reject.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
* |SupplicantStatusCode.FAILURE_IFACE_DISABLED|
|
|
*/
|
|
reject(MacAddress peerAddress) generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Invite a device to a persistent group.
|
|
* If the peer device is the group owner of the persistent group, the peer
|
|
* parameter is not needed. Otherwise it is used to specify which
|
|
* device to invite. |goDeviceAddress| parameter may be used to override
|
|
* the group owner device address for Invitation Request should it not be
|
|
* known for some reason (this should not be needed in most cases).
|
|
*
|
|
* @param groupIfName Group interface name to use.
|
|
* @param goDeviceAddress MAC address of the group owner device.
|
|
* @param peerAddress MAC address of the device to invite.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
invite(string groupIfName, MacAddress goDeviceAddress, MacAddress peerAddress)
|
|
generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Reinvoke a device from a persistent group.
|
|
*
|
|
* @param persistentNetworkId Used to specify the persistent group.
|
|
* @param peerAddress MAC address of the device to reinvoke.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
reinvoke(SupplicantNetworkId persistentNetworkId, MacAddress peerAddress)
|
|
generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Configure Extended Listen Timing.
|
|
*
|
|
* If enabled, listen state must be entered every |intervalInMillis| for at
|
|
* least |periodInMillis|. Both values have acceptable range of 1-65535
|
|
* (with interval obviously having to be larger than or equal to duration).
|
|
* If the P2P module is not idle at the time the Extended Listen Timing
|
|
* timeout occurs, the Listen State operation must be skipped.
|
|
*
|
|
* @param periodInMillis Period in milliseconds.
|
|
* @param intervalInMillis Interval in milliseconds.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
configureExtListen(uint32_t periodInMillis,
|
|
uint32_t intervalInMillis)
|
|
generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Set P2P Listen channel.
|
|
*
|
|
* When specifying a social channel on the 2.4 GHz band (1/6/11) there is no
|
|
* need to specify the operating class since it defaults to 81. When
|
|
* specifying a social channel on the 60 GHz band (2), specify the 60 GHz
|
|
* operating class (180).
|
|
*
|
|
* @param channel Wifi channel. eg, 1, 6, 11.
|
|
* @param operatingClass Operating Class indicates the channel set of the AP
|
|
* indicated by this BSSID
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
setListenChannel(uint32_t channel, uint32_t operatingClass)
|
|
generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Set P2P disallowed frequency ranges.
|
|
*
|
|
* Specify ranges of frequencies that are disallowed for any p2p operations.
|
|
|
|
* @param ranges List of ranges which needs to be disallowed.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
setDisallowedFrequencies(vec<FreqRange> ranges)
|
|
generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Gets the operational SSID of the device.
|
|
*
|
|
* @param peerAddress MAC address of the peer.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
* @return ssid SSID of the device
|
|
*/
|
|
getSsid(MacAddress peerAddress)
|
|
generates (SupplicantStatus status, Ssid ssid);
|
|
|
|
/**
|
|
* Gets the capability of the group which the device is a
|
|
* member of.
|
|
*
|
|
* @param peerAddress MAC address of the peer.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
* @return capabilityMask Combination of |P2pGroupCapabilityMask| values.
|
|
*/
|
|
getGroupCapability(MacAddress peerAddress)
|
|
generates (SupplicantStatus status,
|
|
bitfield<P2pGroupCapabilityMask> capabilities);
|
|
|
|
/**
|
|
* This command can be used to add a bonjour service.
|
|
*
|
|
* @param query Hex dump of the query data.
|
|
* @param return Hex dump of the response data.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
addBonjourService(vec<uint8_t> query, vec<uint8_t> response)
|
|
generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* This command can be used to remove a bonjour service.
|
|
*
|
|
* @param query Hex dump of the query data.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_NOT_STARTED|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
removeBonjourService(vec<uint8_t> query) generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* This command can be used to add a UPNP service.
|
|
*
|
|
* @param version Version to be used.
|
|
* @package serviceName Service name to be used.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
addUpnpService(uint32_t version, string serviceName)
|
|
generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* This command can be used to remove a UPNP service.
|
|
*
|
|
* @param version Version to be used.
|
|
* @package serviceName Service name to be used.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_NOT_STARTED|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
removeUpnpService(uint32_t version, string serviceName)
|
|
generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* This command can be used to flush all services from the
|
|
* device.
|
|
*
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
flushServices() generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Schedule a P2P service discovery request. The parameters for this command
|
|
* are the device address of the peer device (or 00:00:00:00:00:00 for
|
|
* wildcard query that is sent to every discovered P2P peer that supports
|
|
* service discovery) and P2P Service Query TLV(s) as hexdump.
|
|
*
|
|
* @param peerAddress MAC address of the device to discover.
|
|
* @param query Hex dump of the query data.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
* @return identifier Identifier for the request. Can be used to cancel the
|
|
* request.
|
|
*/
|
|
requestServiceDiscovery(MacAddress peerAddress, vec<uint8_t> query)
|
|
generates (SupplicantStatus status, uint64_t identifier);
|
|
|
|
/**
|
|
* Cancel a previous service discovery request.
|
|
*
|
|
* @return identifier Identifier for the request to cancel.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_NOT_STARTED|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
cancelServiceDiscovery(uint64_t identifier)
|
|
generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Send driver command to set Miracast mode.
|
|
*
|
|
* @param mode Mode of Miracast.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
setMiracastMode(MiracastMode mode)
|
|
generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Initiate WPS Push Button setup.
|
|
* The PBC operation requires that a button is also pressed at the
|
|
* AP/Registrar at about the same time (2 minute window).
|
|
*
|
|
* @param groupIfName Group interface name to use.
|
|
* @param bssid BSSID of the AP. Use zero'ed bssid to indicate wildcard.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
startWpsPbc(string groupIfName, Bssid bssid)
|
|
generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Initiate WPS Pin Keypad setup.
|
|
*
|
|
* @param groupIfName Group interface name to use.
|
|
* @param pin 8 digit pin to be used.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
startWpsPinKeypad(string groupIfName, string pin)
|
|
generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Initiate WPS Pin Display setup.
|
|
*
|
|
* @param groupIfName Group interface name to use.
|
|
* @param bssid BSSID of the AP. Use zero'ed bssid to indicate wildcard.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
* @return generatedPin 8 digit pin generated.
|
|
*/
|
|
startWpsPinDisplay(string groupIfName, Bssid bssid)
|
|
generates (SupplicantStatus status, string generatedPin);
|
|
|
|
/**
|
|
* Cancel any ongoing WPS operations.
|
|
*
|
|
* @param groupIfName Group interface name to use.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
|
|
*/
|
|
cancelWps(string groupIfName) generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Enable/Disable Wifi Display.
|
|
*
|
|
* @param enable true to enable, false to disable.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
enableWfd(bool enable) generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Set Wifi Display device info.
|
|
*
|
|
* @param info WFD device info as described in section 5.1.2 of WFD technical
|
|
* specification v1.0.0.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
setWfdDeviceInfo(uint8_t[6] info) generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Creates a NFC handover request message.
|
|
*
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
* @return request Bytes representing the handover request as specified in
|
|
* section 3.1.1 of NFC Connection Handover 1.2 Technical
|
|
* Specification.
|
|
*/
|
|
createNfcHandoverRequestMessage()
|
|
generates (SupplicantStatus status, vec<uint8_t> request);
|
|
|
|
/**
|
|
* Creates a NFC handover select message.
|
|
*
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
* @return select Bytes representing the handover select as specified in
|
|
* section 3.1.2 of NFC Connection Handover 1.2 Technical
|
|
* Specification.
|
|
*/
|
|
createNfcHandoverSelectMessage()
|
|
generates (SupplicantStatus status, vec<uint8_t> select);
|
|
|
|
/**
|
|
* Report the response of the NFC handover request.
|
|
*
|
|
* @param request Bytes representing the handover request as specified in
|
|
* section 3.1.1 of NFC Connection Handover 1.2 Technical
|
|
* Specification.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
reportNfcHandoverResponse(vec<uint8_t> request)
|
|
generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Report the initiation of the NFC handover select.
|
|
*
|
|
* @param select Bytes representing the handover select as specified in
|
|
* section 3.1.2 of NFC Connection Handover 1.2 Technical
|
|
* Specification.
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
reportNfcHandoverInitiation(vec<uint8_t> select)
|
|
generates (SupplicantStatus status);
|
|
|
|
/**
|
|
* Persist the current configuration to disk.
|
|
*
|
|
* @return status Status of the operation.
|
|
* Possible status codes:
|
|
* |SupplicantStatusCode.SUCCESS|,
|
|
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
|
|
* |SupplicantStatusCode.FAILURE_IFACE_INVALID|
|
|
*/
|
|
saveConfig() generates (SupplicantStatus status);
|
|
};
|