You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

450 lines
12 KiB

/*
* Copyright (c) 2017, The Linux Foundation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of The Linux Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __DRM_INTERFACE_H__
#define __DRM_INTERFACE_H__
#include <map>
#include <string>
#include <utility>
#include <vector>
#include "xf86drm.h"
#include "xf86drmMode.h"
namespace sde_drm {
/*
* Drm Atomic Operation Codes
*/
enum struct DRMOps {
/*
* Op: Sets plane source crop
* Arg: uint32_t - Plane ID
* DRMRect - Source Rectangle
*/
PLANE_SET_SRC_RECT,
/*
* Op: Sets plane destination rect
* Arg: uint32_t - Plane ID
* DRMRect - Dst Rectangle
*/
PLANE_SET_DST_RECT,
/*
* Op: Sets plane zorder
* Arg: uint32_t - Plane ID
* uint32_t - zorder
*/
PLANE_SET_ZORDER,
/*
* Op: Sets plane rotation flags
* Arg: uint32_t - Plane ID
* uint32_t - bit mask of rotation flags (See drm_mode.h for enums)
*/
PLANE_SET_ROTATION,
/*
* Op: Sets plane alpha
* Arg: uint32_t - Plane ID
* uint32_t - alpha value
*/
PLANE_SET_ALPHA,
/*
* Op: Sets the blend type
* Arg: uint32_t - Plane ID
* uint32_t - blend type (see DRMBlendType)
*/
PLANE_SET_BLEND_TYPE,
/*
* Op: Sets horizontal decimation
* Arg: uint32_t - Plane ID
* uint32_t - decimation factor
*/
PLANE_SET_H_DECIMATION,
/*
* Op: Sets vertical decimation
* Arg: uint32_t - Plane ID
* uint32_t - decimation factor
*/
PLANE_SET_V_DECIMATION,
/*
* Op: Sets source config flags
* Arg: uint32_t - Plane ID
* uint32_t - flags to enable or disable a specific op. E.g. deinterlacing
*/
PLANE_SET_SRC_CONFIG,
/*
* Op: Sets frame buffer ID for plane. Set together with CRTC.
* Arg: uint32_t - Plane ID
* uint32_t - Framebuffer ID
*/
PLANE_SET_FB_ID,
/*
* Op: Sets the crtc for this plane. Set together with FB_ID.
* Arg: uint32_t - Plane ID
* uint32_t - CRTC ID
*/
PLANE_SET_CRTC,
/*
* Op: Sets acquire fence for this plane's buffer. Set together with FB_ID, CRTC.
* Arg: uint32_t - Plane ID
* uint32_t - Input fence
*/
PLANE_SET_INPUT_FENCE,
/*
* Op: Sets scaler config on this plane.
* Arg: uint32_t - Plane ID
* uint64_t - Address of the scaler config object (version based)
*/
PLANE_SET_SCALER_CONFIG,
/*
* Op: Activate or deactivate a CRTC
* Arg: uint32_t - CRTC ID
* uint32_t - 1 to enable, 0 to disable
*/
CRTC_SET_ACTIVE,
/*
* Op: Sets display mode
* Arg: uint32_t - CRTC ID
* drmModeModeInfo* - Pointer to display mode
*/
CRTC_SET_MODE,
/*
* Op: Sets an offset indicating when a release fence should be signalled.
* Arg: uint32_t - offset
* 0: non-speculative, default
* 1: speculative
*/
CRTC_SET_OUTPUT_FENCE_OFFSET,
/*
* Op: Returns release fence for this frame. Should be called after Commit() on
* DRMAtomicReqInterface.
* Arg: uint32_t - CRTC ID
* int * - Pointer to an integer that will hold the returned fence
*/
CRTC_GET_RELEASE_FENCE,
/*
* Op: Sets PP feature
* Arg: uint32_t - CRTC ID
* DRMPPFeatureInfo * - PP feature data pointer
*/
CRTC_SET_POST_PROC,
/*
* Op: Returns retire fence for this commit. Should be called after Commit() on
* DRMAtomicReqInterface.
* Arg: uint32_t - Connector ID
* int * - Pointer to an integer that will hold the returned fence
*/
CONNECTOR_GET_RETIRE_FENCE,
/*
* Op: Sets writeback connector destination rect
* Arg: uint32_t - Connector ID
* DRMRect - Dst Rectangle
*/
CONNECTOR_SET_OUTPUT_RECT,
/*
* Op: Sets frame buffer ID for writeback connector.
* Arg: uint32_t - Connector ID
* uint32_t - Framebuffer ID
*/
CONNECTOR_SET_OUTPUT_FB_ID,
};
enum struct DRMRotation {
FLIP_H = 0x1,
FLIP_V = 0x2,
ROT_90 = 0x4,
};
enum struct DRMBlendType {
UNDEFINED = 0,
OPAQUE = 1,
PREMULTIPLIED = 2,
COVERAGE = 3,
};
enum struct DRMSrcConfig {
DEINTERLACE = 0,
};
/* Display type to identify a suitable connector */
enum struct DRMDisplayType {
PERIPHERAL,
TV,
VIRTUAL,
};
struct DRMRect {
uint32_t left; // Left-most pixel coordinate.
uint32_t top; // Top-most pixel coordinate.
uint32_t right; // Right-most pixel coordinate.
uint32_t bottom; // Bottom-most pixel coordinate.
};
//------------------------------------------------------------------------
// DRM Info Query Types
//------------------------------------------------------------------------
enum struct QSEEDVersion {
V1,
V2,
V3,
};
enum struct SmartDMARevision {
V1,
V2,
};
/* Per CRTC Resource Info*/
struct DRMCrtcInfo {
bool has_src_split;
uint32_t max_blend_stages;
QSEEDVersion qseed_version;
SmartDMARevision smart_dma_rev;
};
enum struct DRMPlaneType {
// Has CSC and scaling capability
VIG = 0,
// Has scaling capability but no CSC
RGB,
// No scaling support
DMA,
// Supports a small dimension and doesn't use a CRTC stage
CURSOR,
MAX,
};
struct DRMPlaneTypeInfo {
DRMPlaneType type;
uint32_t master_plane_id;
// FourCC format enum and modifier
std::vector<std::pair<uint32_t, uint64_t>> formats_supported;
uint32_t max_linewidth;
uint32_t max_upscale;
uint32_t max_downscale;
uint32_t max_horizontal_deci;
uint32_t max_vertical_deci;
};
// All DRM Planes as map<Plane_id , plane_type_info> listed from highest to lowest priority
typedef std::vector<std::pair<uint32_t, DRMPlaneTypeInfo>> DRMPlanesInfo;
enum struct DRMTopology {
UNKNOWN, // To be compat with driver defs in sde_kms.h
SINGLE_LM,
DUAL_LM,
PPSPLIT,
DUAL_LM_MERGE,
};
enum struct DRMPanelMode {
VIDEO,
COMMAND,
};
/* Per Connector Info*/
struct DRMConnectorInfo {
uint32_t mmWidth;
uint32_t mmHeight;
uint32_t type;
uint32_t num_modes;
drmModeModeInfo *modes;
DRMTopology topology;
std::string panel_name;
DRMPanelMode panel_mode;
bool is_primary;
// Valid only if DRMPanelMode is VIDEO
bool dynamic_fps;
// FourCC format enum and modifier
std::vector<std::pair<uint32_t, uint64_t>> formats_supported;
// Valid only if type is DRM_MODE_CONNECTOR_VIRTUAL
uint32_t max_linewidth;
};
/* Identifier token for a display */
struct DRMDisplayToken {
uint32_t conn_id;
uint32_t crtc_id;
};
enum DRMPPFeatureID {
kFeaturePcc,
kFeatureIgc,
kFeaturePgc,
kFeatureMixerGc,
kFeaturePaV2,
kFeatureDither,
kFeatureGamut,
kFeaturePADither,
kPPFeaturesMax,
};
enum DRMPPPropType {
kPropEnum,
kPropRange,
kPropBlob,
kPropTypeMax,
};
struct DRMPPFeatureInfo {
DRMPPFeatureID id;
DRMPPPropType type;
uint32_t version;
uint32_t payload_size;
void *payload;
};
struct DRMScalerLUTInfo {
uint32_t dir_lut_size = 0;
uint32_t cir_lut_size = 0;
uint32_t sep_lut_size = 0;
uint64_t dir_lut = 0;
uint64_t cir_lut = 0;
uint64_t sep_lut = 0;
};
/* DRM Atomic Request Property Set.
*
* Helper class to create and populate atomic properties of DRM components
* when rendered in DRM atomic mode */
class DRMAtomicReqInterface {
public:
virtual ~DRMAtomicReqInterface() {}
/* Perform request operation.
*
* [input]: opcode: operation code from DRMOps list.
* var_arg: arguments for DRMOps's can differ in number and
* data type. Refer above DRMOps to details.
* [return]: Error code if the API fails, 0 on success.
*/
virtual int Perform(DRMOps opcode, ...) = 0;
/*
* Commit the params set via Perform(). Also resets the properties after commit. Needs to be
* called every frame.
* [input]: synchronous: Determines if the call should block until a h/w flip
* [return]: Error code if the API fails, 0 on success.
*/
virtual int Commit(bool synchronous) = 0;
/*
* Validate the params set via Perform().
* [return]: Error code if the API fails, 0 on success.
*/
virtual int Validate() = 0;
};
class DRMManagerInterface;
/* Populates a singleton instance of DRMManager */
typedef int (*GetDRMManager)(int fd, DRMManagerInterface **intf);
/* Destroy DRMManager instance */
typedef int (*DestroyDRMManager)();
/*
* DRM Manager Interface - Any class which plans to implement helper function for vendor
* specific DRM driver implementation must implement the below interface routines to work
* with SDM.
*/
class DRMManagerInterface {
public:
virtual ~DRMManagerInterface() {}
/*
* Since SDM completely manages the planes. GetPlanesInfo will provide all
* the plane information.
* [output]: DRMPlanesInfo: Resource Info for planes.
*/
virtual void GetPlanesInfo(DRMPlanesInfo *info) = 0;
/*
* Will provide all the information of a selected crtc.
* [input]: Use crtc id 0 to obtain system wide info
* [output]: DRMCrtcInfo: Resource Info for the given CRTC id.
*/
virtual void GetCrtcInfo(uint32_t crtc_id, DRMCrtcInfo *info) = 0;
/*
* Will provide all the information of a selected connector.
* [output]: DRMConnectorInfo: Resource Info for the given connector id
*/
virtual void GetConnectorInfo(uint32_t conn_id, DRMConnectorInfo *info) = 0;
/*
* Will query post propcessing feature info of a CRTC.
* [output]: DRMPPFeatureInfo: CRTC post processing feature info
*/
virtual void GetCrtcPPInfo(uint32_t crtc_id, DRMPPFeatureInfo &info) = 0;
/*
* Register a logical display to receive a token.
* Each display pipeline in DRM is identified by its CRTC and Connector(s).
* On display connect(bootup or hotplug), clients should invoke this interface to
* establish the pipeline for the display and should get a DisplayToken
* populated with crtc and connnector(s) id's. Here onwards, Client should
* use this token to represent the display for any Perform operations if
* needed.
*
* [input]: disp_type - Peripheral / TV / Virtual
* [output]: DRMDisplayToken - CRTC and Connector id's for the display
* [return]: 0 on success, a negative error value otherwise
*/
virtual int RegisterDisplay(DRMDisplayType disp_type, DRMDisplayToken *tok) = 0;
/* Client should invoke this interface on display disconnect.
* [input]: DRMDisplayToken - identifier for the display.
*/
virtual void UnregisterDisplay(const DRMDisplayToken &token) = 0;
/*
* Creates and returns an instance of DRMAtomicReqInterface corresponding to a display token
* returned as part of RegisterDisplay API. Needs to be called per display.
* [input]: DRMDisplayToken that identifies a display pipeline
* [output]: Pointer to an instance of DRMAtomicReqInterface.
* [return]: Error code if the API fails, 0 on success.
*/
virtual int CreateAtomicReq(const DRMDisplayToken &token, DRMAtomicReqInterface **intf) = 0;
/*
* Destroys the instance of DRMAtomicReqInterface
* [input]: Pointer to a DRMAtomicReqInterface
* [return]: Error code if the API fails, 0 on success.
*/
virtual int DestroyAtomicReq(DRMAtomicReqInterface *intf) = 0;
/*
* Sets the global scaler LUT
* [input]: LUT Info
* [return]: Error code if the API fails, 0 on success.
*/
virtual int SetScalerLUT(const DRMScalerLUTInfo &lut_info) = 0;
};
} // namespace sde_drm
#endif // __DRM_INTERFACE_H__