|
|
/*
|
|
|
* Copyright (c) Hisilicon Technologies Co., Ltd. 2008-2020. All rights reserved.
|
|
|
* Description: Application programming interfaces (APIs) of IR
|
|
|
*/
|
|
|
|
|
|
#ifndef __UAPI_IR_H__
|
|
|
#define __UAPI_IR_H__
|
|
|
|
|
|
#include "td_type.h"
|
|
|
|
|
|
#ifdef __cplusplus
|
|
|
#if __cplusplus
|
|
|
extern "C" {
|
|
|
#endif
|
|
|
#endif /* __cplusplus */
|
|
|
|
|
|
/* status of key */
|
|
|
/* CNcomment:按键状态 */
|
|
|
typedef enum {
|
|
|
UAPI_KEY_STATUS_DOWN = 0, /* Pressed */ /* CNcomment:按下按键 */
|
|
|
UAPI_KEY_STATUS_HOLD, /* Hold */ /* CNcomment:按住不动 */
|
|
|
UAPI_KEY_STATUS_UP, /* Released */ /* CNcomment:抬起按键 */
|
|
|
UAPI_KEY_STATUS_MAX
|
|
|
} uapi_key_status;
|
|
|
|
|
|
/* Code type supported by the infrared (IR) module */
|
|
|
/* CNcomment:IR支持的码型 */
|
|
|
typedef enum {
|
|
|
UAPI_IR_CODE_NEC_SIMPLE = 0, /* NEC with simple repeat code */ /* CNcomment:NEC with simple repeat code码型 */
|
|
|
UAPI_IR_CODE_TC9012, /* TC9012 code */ /* CNcomment:TC9012码型 */
|
|
|
UAPI_IR_CODE_NEC_FULL, /* NEC with full repeat code */ /* CNcomment:NEC with full repeat code码型 */
|
|
|
UAPI_IR_CODE_SONY_12BIT, /* SONY 12-bit code */ /* CNcomment:SONY 12BIT码型 */
|
|
|
UAPI_IR_CODE_RAW, /* Raw code */ /* CNcomment:raw 码型 */
|
|
|
UAPI_IR_CODE_MAX
|
|
|
} uapi_ir_code;
|
|
|
|
|
|
/* List of IR code type. For details about UAPI_IR_STD, see uapi_ir_code. */
|
|
|
/* CNcomment:IR码型列表,UAPI_IR_STD部分请参照uapi_ir_code */
|
|
|
typedef enum {
|
|
|
UAPI_IR_NEC, /* For NEC protocol */ /* CNcomment:NEC码型 */
|
|
|
UAPI_IR_RC6A = 10, /* For RC6A protocol */ /* CNcomment:RC6A码型 */
|
|
|
UAPI_IR_RC5, /* For RC5 protocol */ /* CNcomment:RC5码型 */
|
|
|
UAPI_IR_LOW_LATENCY_PROTOCOL,
|
|
|
UAPI_IR_RC6_MODE0, /* For RC6 mode 0 */ /* CNcomment:RC6 mode0码型 */
|
|
|
UAPI_IR_RCMM, /* For RCMM 24/32 protocol */ /* CNcomment:RCMM 24/32码型 */
|
|
|
UAPI_IR_RUWIDO, /* For Ruwido protocol */ /* CNcomment:Ruwido码型 */
|
|
|
UAPI_IR_RCRF8, /* For RCRF8 protocol */ /* CNcomment:RCRF8码型 */
|
|
|
UAPI_IR_MULTIPLE, /* For multiple protocol support */ /* CNcomment:Multiple码型 */
|
|
|
UAPI_IR_RMAP, /* For RMAP protocol with Mancester coding */ /* CNcomment:RMAP 曼彻斯特码型 */
|
|
|
UAPI_IR_RSTEP, /* For RSTEP protocol */ /* CNcomment:RSTEP码型 */
|
|
|
UAPI_IR_RMAP_DOUBLEBIT, /* For RMAP protocol with Double bit coding */ /* CNcomment:RMAP 双bit码型 */
|
|
|
UAPI_IR_LOW_LATENCY_PRO_PROTOCOL,
|
|
|
UAPI_IR_XMP, /* For XMP protocol */ /* CNcomment:XMP码型 */
|
|
|
UAPI_IR_USER_DEFINED, /* For user protocol */ /* CNcomment:用户自定义码型 */
|
|
|
UAPI_IR_PROTOCOL_MAX
|
|
|
} uapi_ir_protocol;
|
|
|
|
|
|
/* ---IR--- */
|
|
|
/*
|
|
|
* brief starts the IR device.
|
|
|
* cncomment:\brief 打开IR设备。cnend
|
|
|
*
|
|
|
* attention \n
|
|
|
* This API can be called repeatedly.
|
|
|
* Key IDs can be received only after you can start the IR device, and then call uapi_ir_enable. \n
|
|
|
* CNcomment:重复调用会返回成功，打开设备后必须再调用UAPI_IR_Enable才能正常接收键值。CNend
|
|
|
*
|
|
|
* param N/A CNcomment:无 CNend
|
|
|
* retval TD_SUCCESS success CNcomment:成功 CNend
|
|
|
* retval ::SOC_ERR_IR_OPEN_ERR the IR device fails to open CNcomment:IR设备打开失败 CNend
|
|
|
* see \n
|
|
|
* N/A
|
|
|
*/
|
|
|
td_s32 uapi_ir_init(td_void);
|
|
|
|
|
|
/*
|
|
|
* brief Stops the IR device.
|
|
|
* CNcomment:\brief 关闭IR设备。CNend
|
|
|
*
|
|
|
* attention \n
|
|
|
* This API can be called repeatedly. \n
|
|
|
* CNcomment:重复调用关闭会返回成功。CNend
|
|
|
*
|
|
|
* param N/A CNcomment:无 CNend
|
|
|
* retval TD_SUCCESS Success CNcomment:成功 CNend
|
|
|
* retval ::SOC_ERR_IR_CLOSE_ERR The IR device fails to close. CNcomment:IR设备关闭失败 CNend
|
|
|
* see \n
|
|
|
* N/A
|
|
|
*/
|
|
|
td_s32 uapi_ir_deinit(td_void);
|
|
|
|
|
|
/*
|
|
|
* brief Enables the IR device.
|
|
|
* CNcomment:\brief 使能IR设备。CNend
|
|
|
* attention \n
|
|
|
* N/A
|
|
|
* param[in] enable IR enable. TD_TRUE: enabled; TD_FALSE: disabled
|
|
|
* CNcomment:IR 使能开关, TD_TRUE 使能, TD_FALSE 禁用。CNend
|
|
|
* retval TD_SUCCESS Success CNcomment:成功 CNend
|
|
|
* retval ::SOC_ERR_IR_NOT_INIT The IR device is not initialized. CNcomment:IR设备未初始化 CNend
|
|
|
* retval ::SOC_ERR_IR_INVALID_PARA The parameter is invalid. CNcomment:参数非法 CNend
|
|
|
* retval ::SOC_ERR_IR_ENABLE_FAILED It fails to enable IR device. CNcomment:使能设备失败 CNend
|
|
|
* see \n
|
|
|
* N/A
|
|
|
*/
|
|
|
td_s32 uapi_ir_enable(td_bool enable);
|
|
|
|
|
|
/*
|
|
|
* brief Obtains the protocol type of a remote control.
|
|
|
* CNcomment:\brief 获取遥控器的协议类型 。CNend
|
|
|
*
|
|
|
* attention \n
|
|
|
* This interface is only supported in IR_STD mode.
|
|
|
* And it must be used after function "uapi_ir_get_value_protocol".\n
|
|
|
* CNcomment:此接口只在IR_STD模式下支持。需要在UAPI_IR_GetValueWithProtocol函数后调用。 CNend
|
|
|
*
|
|
|
* param[out] protocol protocol type pointer,reference uapi_ir_protocol for detail
|
|
|
* CNcomment:协议类型指针 具体含义请参考::uapi_ir_protocol CNend
|
|
|
* retval TD_SUCCESS Success CNcomment:成功 CNend
|
|
|
* retval ::SOC_ERR_IR_NOT_INIT The IR device is not initialized. CNcomment:IR设备未初始化 CNend
|
|
|
* retval ::SOC_ERR_IR_NULL_PTR The pointer is invalid. CNcomment: 指针为空 CNend
|
|
|
* see \n
|
|
|
* N/A
|
|
|
*/
|
|
|
td_s32 uapi_ir_get_protocol(uapi_ir_protocol *protocol);
|
|
|
|
|
|
/*
|
|
|
* brief obtain name of remote control protocol
|
|
|
* CNcomment:\brief 获取遥控器的协议名称 。CNend
|
|
|
*
|
|
|
* attention \n
|
|
|
* when IR_TYPE=IR_LIRC is effective, this interface is not supported now.
|
|
|
* CNcomment:当IR_TYPE=IR_LIRC时有效，此接口暂不支持 CNend
|
|
|
*
|
|
|
* param[out] protocol used to save first address of the protocol name buffer
|
|
|
* CNcomment:用于存储协议名称的缓冲区首地址 CNend
|
|
|
* param[in] buf_len used to save length of the protocol name buffer
|
|
|
* CNcomment:用于存储协议名称的缓冲区长度 CNend
|
|
|
* retval ::SOC_ERR_IR_UNSUPPORT It is not supported. CNcomment:操作不支持 CNend
|
|
|
* see \n
|
|
|
* N/A
|
|
|
*/
|
|
|
td_s32 uapi_ir_get_protocol_name(td_char *protocol, td_s32 buf_len);
|
|
|
|
|
|
/*
|
|
|
* brief Obtains the key values and key status of the remote control.
|
|
|
* CNcomment:\brief 获取遥控器的按键值和按键状态 。CNend
|
|
|
*
|
|
|
* attention \n
|
|
|
*
|
|
|
* param[out] press_status Key status. For details about the definition, see the description of::uapi_key_status.
|
|
|
* CNcomment:按键状态。具体含义请参考::uapi_key_status CNend
|
|
|
* param[out] key_id Key value CNcomment:按键值 CNend
|
|
|
* param[out] protocol_name used to save first address of the protocol name buffer
|
|
|
* CNcomment:用于存储协议名称的缓冲区首地址 CNend
|
|
|
* param[in] name_size used to save length of the protocol name buffer
|
|
|
* CNcomment:用于存储协议名称的缓冲区长度 CNend
|
|
|
* param[in] timeout_ms Timeout (in ms). 0: not blocked; 0xFFFFFFFF: infinite block
|
|
|
* CNcomment:超时值, 单位是毫秒, 0 - 不阻塞, 0xFFFFFFFF-永久阻塞 CNend
|
|
|
* retval TD_SUCCESS Success CNcomment:成功 CNend
|
|
|
* retval ::SOC_ERR_IR_NOT_INIT The IR device is not initialized. CNcomment:IR设备未初始化 CNend
|
|
|
* retval ::SOC_ERR_IR_NULL_PTR The pointer is invalid. CNcomment: 指针为空 CNend
|
|
|
* retval ::SOC_ERR_IR_INVALID_PARA The parameter is invalid. CNcomment:参数非法 CNend
|
|
|
* retval ::SOC_ERR_IR_SET_BLOCKTIME_FAILED The IR device fails to set block time. CNcomment:设置阻塞时间失败 CNend
|
|
|
* retval ::SOC_ERR_IR_READ_FAILED The IR device fails to read key. CNcomment:读取键值和状态失败 CNend
|
|
|
* see \n
|
|
|
* N/A
|
|
|
*/
|
|
|
td_s32 uapi_ir_get_value_protocol(uapi_key_status *press_status, td_u64 *key_id,
|
|
|
td_char *protocol_name, td_s32 name_size, td_u32 timeout_ms);
|
|
|
|
|
|
/*
|
|
|
* brief Set key fetch or symbol fetch from ir driver.
|
|
|
* CNcomment:\brief 设定从红外驱动获取的是键值还是裸电平 。CNend
|
|
|
*
|
|
|
* attention \n
|
|
|
* when IR_TYPE=IR_S2 is effective.
|
|
|
* CNcomment:当IR_TYPE=IR_S2时有效。CNend
|
|
|
*
|
|
|
* param[in] mode 0 means key mode. 1 means symbol mode CNcomment:0获取键值，1获取裸电平 CNend
|
|
|
* retval TD_SUCCESS Success CNcomment:成功 CNend
|
|
|
* retval ::SOC_ERR_IR_NOT_INIT The IR device is not initialized. CNcomment:IR设备未初始化 CNend
|
|
|
* retval ::SOC_ERR_IR_INVALID_PARA The parameter is invalid. CNcomment:参数非法 CNend
|
|
|
* retval ::SOC_ERR_IR_SET_FETCHMETHOD_FAILED The IR device fails to set fetch method. CNcomment:设置获取方式失败 CNend
|
|
|
* see \n
|
|
|
* N/A
|
|
|
*/
|
|
|
td_s32 uapi_ir_set_fetch_mode(td_s32 mode);
|
|
|
|
|
|
/*
|
|
|
* brief Obtains the raw symbols from ir driver.
|
|
|
* CNcomment:\brief 获取遥控器的裸电平 。CNend
|
|
|
*
|
|
|
* attention \n
|
|
|
* when IR_TYPE=IR_S2 is effective.
|
|
|
* CNcomment:当IR_TYPE=IR_S2时有效。CNend
|
|
|
*
|
|
|
* param[out] first lower pluse value CNcomment:裸电平对的低位 CNend
|
|
|
* param[out] second upper space value CNcomment:裸电平对的高位 CNend
|
|
|
* param[in] timeout_ms read timeout . CNcomment:读超时时间。CNend
|
|
|
*
|
|
|
* retval TD_SUCCESS Success CNcomment:成功 CNend
|
|
|
* retval ::SOC_ERR_IR_NOT_INIT The IR device is not initialized. CNcomment:IR设备未初始化 CNend
|
|
|
* retval ::SOC_ERR_IR_NULL_PTR The pointer is invalid. CNcomment: 指针为空 CNend
|
|
|
* retval ::SOC_ERR_IR_SET_BLOCKTIME_FAILED The IR device fails to set block time. CNcomment:设置阻塞时间失败 CNend
|
|
|
* retval ::SOC_ERR_IR_READ_FAILED The IR device fails to read key. CNcomment:读取键值和状态失败 CNend
|
|
|
* see \n
|
|
|
* N/A
|
|
|
*/
|
|
|
td_s32 uapi_ir_get_symbol(td_u64 *first, td_u64 *second, td_u32 timeout_ms);
|
|
|
|
|
|
/*
|
|
|
* brief Enables or disables the function of reporting the released status of a key.
|
|
|
* CNcomment:\brief 设置是否上报按键弹起状态。CNend
|
|
|
*
|
|
|
* attention \n
|
|
|
* The function is enabled by default.
|
|
|
* CNcomment:如不设置，默认为打开。CNend
|
|
|
*
|
|
|
* param[in] enable Key released enable. CNcomment:按键弹起有效。CNend
|
|
|
* 0: disabled CNcomment:0：关闭；CNend
|
|
|
* 1: enabled CNcomment: 1：使能。CNend
|
|
|
* retval TD_SUCCESS Success CNcomment:成功 CNend
|
|
|
* retval ::SOC_ERR_IR_NOT_INIT The IR device is not initialized. CNcomment:IR设备未初始化 CNend
|
|
|
* retval ::SOC_ERR_IR_INVALID_PARA The parameter is invalid. CNcomment:参数非法 CNend
|
|
|
* retval ::SOC_ERR_IR_SET_KEYUP_FAILED It fails to enable released key. CNcomment:设置上报按键弹起状态失败 CNend
|
|
|
* see \n
|
|
|
* N/A
|
|
|
*/
|
|
|
td_s32 uapi_ir_enable_keyup(td_bool enable);
|
|
|
|
|
|
/*
|
|
|
* brief Enables or disables the function of reporting the same key value.
|
|
|
* If keys are pressed and held down, data is continuously transmitted to the receive buffer.
|
|
|
* Therefore, you can enable or disable this function for applications as required.
|
|
|
* CNcomment:\brief 设置是否上报重复按键。一直按键时，数据会源源不断的送入到接收缓冲区,
|
|
|
* 因此应用程序可以根据需要来设置是否上报重复按键。CNend
|
|
|
*
|
|
|
* attention \n
|
|
|
* The function is enabled by default.\n
|
|
|
* This API must work with UAPI_IR_RepKeyTimeoutVal.
|
|
|
* The API UAPI_IR_RepKeyTimeoutVal is used to set the interval of reporting the same key value.\n
|
|
|
* If the function of reporting the same key value is enabled, the keys are pressed and held down,
|
|
|
* and the interval is set to 300 ms, data is reported once every 300 ms.
|
|
|
* If the function is disabled, data is reported only once regardless of how long the keys are held down.
|
|
|
* CNcomment:如不设置，默认为打开\n
|
|
|
* 此接口需要和UAPI_IR_RepKeyTimeoutVal函数结合使用，由UAPI_IR_RepKeyTimeoutVal设置上报重复按键的间隔\n
|
|
|
* 如果使能了重复按键上报，当按键一直处于按下状态，间隔设为300毫秒，则每300毫秒会上报一次数据\n
|
|
|
* 如果禁止了重复按键上报，则不论按下多长时间，只上报一次数据。CNend
|
|
|
* param[in] enable Repeat key report enable. CNcomment:按键产生重复按键功能。CNend
|
|
|
* 0: disabled CNcomment:0：关闭；CNend
|
|
|
* 1: enabled CNcomment:1：使能。CNend
|
|
|
* retval TD_SUCCESS Success CNcomment:成功 CNend
|
|
|
* retval ::SOC_ERR_IR_NOT_INIT The IR device is not initialized. CNcomment:IR设备未初始化 CNend
|
|
|
* retval ::SOC_ERR_IR_INVALID_PARA The parameter is invalid. CNcomment:参数非法 CNend
|
|
|
* retval ::SOC_ERR_IR_SET_REPEAT_FAILED It fails to enable repeat key. CNcomment:设置上报重复键失败 CNend
|
|
|
* see \n
|
|
|
* N/A
|
|
|
*/
|
|
|
td_s32 uapi_ir_enable_repkey(td_bool enable);
|
|
|
|
|
|
/*
|
|
|
* brief Sets the interval (in ms) of reporting the same key value.
|
|
|
* CNcomment:\brief 设置上报重复按键的时间间隔，单位为ms 。CNend
|
|
|
*
|
|
|
* attention \n
|
|
|
* This API is unavailable if the function of reporting the same key value is disabled by calling UAPI_IR_IsRepKey.
|
|
|
* CNcomment:当UAPI_IR_IsRepKey配置为不上报重复按键时，此接口设置无效。CNend
|
|
|
*
|
|
|
* param[in] timeout_ms Interval of reporting the same key value. The interval ranges from 0 ms to 65,536 ms.\n
|
|
|
* The value 0 will be set to 108, and the value bigger than 65536 will be set to 65536 \n
|
|
|
* CNcomment:上报重复按键的时间间隔，设置范围：0ms～65536ms 。\n
|
|
|
* 等于0的参数会被强制设置成108，大于65536的参数会被强制设置成65536。CNend
|
|
|
* retval TD_SUCCESS Success CNcomment: CNcomment:成功 CNend
|
|
|
* retval ::SOC_ERR_IR_NOT_INIT The IR device is not initialized. CNcomment:IR设备未初始化 CNend
|
|
|
* retval ::SOC_ERR_IR_SET_REPKEYTIMEOUT_FAILED It fails to set repeat key timeout.
|
|
|
* CNcomment:设置上报重复按键间隔失败 CNend
|
|
|
* see \n
|
|
|
* N/A
|
|
|
*/
|
|
|
td_s32 uapi_ir_set_repkey_timeout(td_u32 timeout_ms);
|
|
|
|
|
|
/*
|
|
|
* brief Sets the code type of the remote control.
|
|
|
* CNcomment:\brief 设置遥控器码型。CNend
|
|
|
*
|
|
|
* attention \n
|
|
|
* when IR_TYPE=IR_STD is effective.
|
|
|
* CNcomment:当IR_TYPE=IR_STD时有效。CNend
|
|
|
*
|
|
|
*
|
|
|
* \param[in] code Four standard code types of the remote control are supported by default.
|
|
|
* CNcomment:默认支持4种标准遥控器码型：CNend
|
|
|
* UAPI_IR_CODE_NEC_SIMPLE:Nec With Simple code type. CNcomment:Nec Simple 码型。 CNend
|
|
|
* UAPI_IR_CODE_TC9012:TC9012 code type. CNcomment:TC9012 码型。 CNend
|
|
|
* UAPI_IR_CODE_NEC_FULL:Nec With Full code type. CNcomment:Nec Full 码型。 CNend
|
|
|
* UAPI_IR_CODE_SONY_12BIT:Sony 12 Bit code type. CNcomment:Sony 12 bit 码型。CNend
|
|
|
* retval TD_SUCCESS Success CNcomment:成功 CNend
|
|
|
* retval ::SOC_ERR_IR_NOT_INIT The IR device is not initialized. CNcomment:IR设备未初始化 CNend
|
|
|
* retval ::SOC_ERR_IR_INVALID_PARA The parameter is invalid. CNcomment:参数非法 CNend
|
|
|
* retval ::SOC_ERR_IR_SETFORMAT_FAILED It fails to set IR code type. CNcomment:设置IR类型失败 CNend
|
|
|
* see \n
|
|
|
* N/A
|
|
|
*/
|
|
|
td_s32 uapi_ir_set_code_type(uapi_ir_code code);
|
|
|
|
|
|
/*
|
|
|
* brief Resets the IR device.
|
|
|
* CNcomment:\brief 复位IR设备。CNend
|
|
|
*
|
|
|
* attention \n
|
|
|
* This API is used to delete the key values in the buffer.
|
|
|
* CNcomment:只是把buffer中的键值清掉。CNend
|
|
|
*
|
|
|
* param N/A CNcomment:无 CNend
|
|
|
* retval TD_SUCCESS Success CNcomment:成功 CNend
|
|
|
* retval ::SOC_ERR_IR_NOT_INIT The IR device is not initialized. CNcomment:IR设备未初始化 CNend
|
|
|
* retval ::SOC_ERR_IR_RESET_FAILED The IR device fails to reset. CNcomment:IR设备复位失败 CNend
|
|
|
* see \n
|
|
|
* N/A
|
|
|
*/
|
|
|
td_s32 uapi_ir_reset(td_void);
|
|
|
|
|
|
/*
|
|
|
* brief enable an infrared code.
|
|
|
* CNcomment:\brief 激活某类红外遥控器协议。CNend
|
|
|
*
|
|
|
* attention \n
|
|
|
* when IR_TYPE=IR_S2 is effective.
|
|
|
* CNcomment:当IR_TYPE=IR_S2时有效。CNend
|
|
|
*
|
|
|
* param N/A CNcomment:无 CNend
|
|
|
* retval TD_SUCCESS Success CNcomment:成功 CNend
|
|
|
* retval ::SOC_ERR_IR_NOT_INIT The IR device is not initialized. CNcomment:IR设备未初始化 CNend
|
|
|
* retval ::SOC_ERR_IR_NULL_PTR The pointer is invalid. CNcomment: 指针为空 CNend
|
|
|
* retval ::SOC_ERR_IR_INVALID_PARA The parameter is invalid. CNcomment:参数非法 CNend
|
|
|
* retval ::SOC_ERR_IR_ENABLE_PROT_FAILED It fails to enable an infrared code. CNcomment:激活遥控协议失败 CNend
|
|
|
* see \n
|
|
|
* N/A
|
|
|
*/
|
|
|
td_s32 uapi_ir_enable_protocol(const td_char *protocol_name);
|
|
|
|
|
|
/*
|
|
|
* brief disable an infrared code.
|
|
|
* CNcomment:\brief 禁用某类红外遥控器协议。CNend
|
|
|
*
|
|
|
* attention \n
|
|
|
* when IR_TYPE=IR_S2 is effective.
|
|
|
* CNcomment:当IR_TYPE=IR_S2时有效。CNend
|
|
|
*
|
|
|
* param N/A CNcomment:无 CNend
|
|
|
* retval TD_SUCCESS Success CNcomment:成功 CNend
|
|
|
* retval ::SOC_ERR_IR_NOT_INIT The IR device is not initialized. CNcomment:IR设备未初始化 CNend
|
|
|
* retval ::SOC_ERR_IR_NULL_PTR The pointer is invalid. CNcomment: 指针为空 CNend
|
|
|
* retval ::SOC_ERR_IR_INVALID_PARA The parameter is invalid. CNcomment:参数非法 CNend
|
|
|
* retval ::SOC_ERR_IR_DISABLE_PROT_FAILED It fails to disalbe an infrared code. CNcomment:禁用遥控协议失败 CNend
|
|
|
* see \n
|
|
|
* N/A
|
|
|
*/
|
|
|
td_s32 uapi_ir_disable_protocol(const td_char *protocol_name);
|
|
|
|
|
|
/*
|
|
|
* brief get the enable or disable status of an infrared code.
|
|
|
* CNcomment:\brief 获取某类红外遥控器协议激活状态。CNend
|
|
|
*
|
|
|
* attention \n
|
|
|
* when IR_TYPE=IR_S2 is effective.
|
|
|
* CNcomment:当IR_TYPE=IR_S2时有效。CNend
|
|
|
*
|
|
|
* param N/A CNcomment:无 CNend
|
|
|
* retval TD_SUCCESS Success CNcomment:成功 CNend
|
|
|
* retval TD_FAILURE Failure CNcomment:失败 CNend
|
|
|
* retval ::SOC_ERR_IR_NOT_INIT The IR device is not initialized. CNcomment:IR设备未初始化 CNend
|
|
|
* retval ::SOC_ERR_IR_NULL_PTR The pointer is invalid. CNcomment: 指针为空 CNend
|
|
|
* retval ::SOC_ERR_IR_INVALID_PARA The parameter is invalid. CNcomment:参数非法 CNend
|
|
|
* retval ::SOC_ERR_IR_GET_PROTENABLE_FAILED It fails to get status of an infrared code.
|
|
|
* CNcomment:获取遥控协议状态失败 CNend
|
|
|
* see \n
|
|
|
* N/A
|
|
|
*/
|
|
|
td_s32 uapi_ir_get_protocol_enabled(const td_char *protocol_name, td_bool *enabled);
|
|
|
|
|
|
/* @} */ /* * <!-- ==== API declaration end ==== */
|
|
|
|
|
|
#ifdef __cplusplus
|
|
|
#if __cplusplus
|
|
|
}
|
|
|
#endif
|
|
|
#endif /* __cplusplus */
|
|
|
|
|
|
#endif /* end of #ifndef __UAPI_IR_H__ */
|
