You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1036 lines
39 KiB
1036 lines
39 KiB
#
|
|
# Copyright (C) 2018 The Android Open-Source Project
|
|
#
|
|
# Licensed under the Apache License, Version 2.0 (the "License");
|
|
# you may not use this file except in compliance with the License.
|
|
# You may obtain a copy of the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS,
|
|
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
# See the License for the specific language governing permissions and
|
|
# limitations under the License.
|
|
#
|
|
|
|
# define hardware platform
|
|
PRODUCT_PLATFORM := sm7250
|
|
|
|
LOCAL_PATH := device/google/redbull
|
|
|
|
PRODUCT_VENDOR_MOVE_ENABLED := true
|
|
TARGET_BOARD_PLATFORM := lito
|
|
|
|
PRODUCT_SOONG_NAMESPACES += \
|
|
hardware/google/av \
|
|
hardware/google/camera \
|
|
hardware/google/interfaces \
|
|
hardware/google/pixel \
|
|
device/google/redbull \
|
|
hardware/qcom/sm7250 \
|
|
vendor/google/airbrush/floral \
|
|
vendor/google/biometrics/face/florence \
|
|
vendor/google/darwinn \
|
|
hardware/qcom/sm7250/display \
|
|
vendor/google/camera \
|
|
vendor/qcom/sm7250 \
|
|
vendor/google/interfaces \
|
|
vendor/google_devices/common/proprietary/confirmatioui_hal \
|
|
vendor/google_nos/host/android \
|
|
vendor/google_nos/test/system-test-harness
|
|
|
|
# Include GPS soong namespace
|
|
PRODUCT_SOONG_NAMESPACES += \
|
|
hardware/qcom/sm7250/gps \
|
|
vendor/qcom/sm7250/proprietary/gps \
|
|
vendor/qcom/sm7250/codeaurora/location
|
|
|
|
# Include sensors soong namespace
|
|
PRODUCT_SOONG_NAMESPACES += \
|
|
vendor/qcom/sensors \
|
|
vendor/google/tools/sensors
|
|
|
|
# Single vendor RIL/Telephony/data with SM7250
|
|
PRODUCT_SOONG_NAMESPACES += \
|
|
vendor/qcom/sm7250/codeaurora/commonsys/telephony/ims/ims-ext-common \
|
|
vendor/qcom/sm7250/codeaurora/dataservices/rmnetctl \
|
|
vendor/qcom/sm7250/proprietary/commonsys/qcrilOemHook \
|
|
vendor/qcom/sm7250/proprietary/commonsys/telephony-apps/ims \
|
|
vendor/qcom/sm7250/proprietary/commonsys/telephony-apps/QtiTelephonyService \
|
|
vendor/qcom/sm7250/proprietary/commonsys/telephony-apps/xdivert \
|
|
vendor/qcom/sm7250/proprietary/qcril-data-hal \
|
|
vendor/qcom/sm7250/proprietary/qcril-hal \
|
|
vendor/qcom/sm7250/proprietary/data
|
|
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
keyguard.no_require_sim=true
|
|
|
|
# enable cal by default on accel sensor
|
|
PRODUCT_PRODUCT_PROPERTIES += \
|
|
persist.vendor.debug.sensors.accel_cal=1
|
|
|
|
PRODUCT_PRODUCT_PROPERTIES += \
|
|
persist.vendor.testing_battery_profile=2
|
|
|
|
# The default value of this variable is false and should only be set to true when
|
|
# the device allows users to retain eSIM profiles after factory reset of user data.
|
|
PRODUCT_PRODUCT_PROPERTIES += \
|
|
masterclear.allow_retain_esim_profiles_after_fdr=true
|
|
|
|
PRODUCT_COPY_FILES += \
|
|
device/google/redbull/default-permissions.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/default-permissions/default-permissions.xml \
|
|
device/google/redbull/component-overrides.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sysconfig/component-overrides.xml \
|
|
frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml \
|
|
frameworks/native/data/etc/android.software.verified_boot.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.verified_boot.xml
|
|
|
|
# Enforce privapp-permissions whitelist
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
ro.control_privapp_permissions=enforce
|
|
|
|
PRODUCT_PACKAGES += \
|
|
messaging \
|
|
|
|
TARGET_PRODUCT_PROP := $(LOCAL_PATH)/product.prop
|
|
|
|
$(call inherit-product, $(LOCAL_PATH)/utils.mk)
|
|
|
|
# Installs gsi keys into ramdisk, to boot a developer GSI with verified boot.
|
|
$(call inherit-product, $(SRC_TARGET_DIR)/product/developer_gsi_keys.mk)
|
|
|
|
PRODUCT_CHARACTERISTICS := nosdcard
|
|
PRODUCT_SHIPPING_API_LEVEL := 30
|
|
BOARD_SHIPPING_API_LEVEL := 30
|
|
|
|
DEVICE_PACKAGE_OVERLAYS += $(LOCAL_PATH)/overlay
|
|
|
|
PRODUCT_COPY_FILES += \
|
|
$(LOCAL_KERNEL):kernel \
|
|
$(LOCAL_PATH)/fstab.hardware:$(TARGET_COPY_OUT_VENDOR_RAMDISK)/first_stage_ramdisk/fstab.$(PRODUCT_PLATFORM) \
|
|
$(LOCAL_PATH)/fstab.hardware:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.$(PRODUCT_PLATFORM) \
|
|
$(LOCAL_PATH)/fstab.persist:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.persist \
|
|
$(LOCAL_PATH)/init.hardware.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).rc \
|
|
$(LOCAL_PATH)/init.modem.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.modem.sh \
|
|
$(LOCAL_PATH)/init.power.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).power.rc \
|
|
$(LOCAL_PATH)/init.radio.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.radio.sh \
|
|
$(LOCAL_PATH)/init.hardware.usb.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).usb.rc \
|
|
$(LOCAL_PATH)/init.insmod.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.insmod.sh \
|
|
$(LOCAL_PATH)/init.sensors.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.sensors.sh \
|
|
$(LOCAL_PATH)/ueventd.rc:$(TARGET_COPY_OUT_VENDOR)/ueventd.rc \
|
|
$(LOCAL_PATH)/init.ramoops.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.ramoops.sh
|
|
|
|
|
|
MSM_VIDC_TARGET_LIST := lito # Get the color format from kernel headers
|
|
MASTER_SIDE_CP_TARGET_LIST := lito # ION specific settings
|
|
|
|
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
|
|
PRODUCT_COPY_FILES += \
|
|
$(LOCAL_PATH)/init.hardware.mpssrfs.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).mpssrfs.rc
|
|
PRODUCT_COPY_FILES += \
|
|
$(LOCAL_PATH)/init.hardware.diag.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).diag.rc
|
|
PRODUCT_COPY_FILES += \
|
|
$(LOCAL_PATH)/init.hardware.ipa.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.$(PRODUCT_PLATFORM).ipa.rc
|
|
else
|
|
PRODUCT_COPY_FILES += \
|
|
$(LOCAL_PATH)/init.hardware.mpssrfs.rc.user:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).mpssrfs.rc
|
|
PRODUCT_COPY_FILES += \
|
|
$(LOCAL_PATH)/init.hardware.diag.rc.user:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).diag.rc
|
|
endif
|
|
|
|
# A/B support
|
|
PRODUCT_PACKAGES += \
|
|
otapreopt_script \
|
|
cppreopts.sh \
|
|
update_engine \
|
|
update_verifier
|
|
|
|
PRODUCT_PACKAGES += \
|
|
linker.vendor_ramdisk \
|
|
tune2fs.vendor_ramdisk \
|
|
resize2fs.vendor_ramdisk
|
|
|
|
# Use Sdcardfs
|
|
PRODUCT_PRODUCT_PROPERTIES += \
|
|
ro.sys.sdcardfs=1
|
|
|
|
# Use FUSE passthrough
|
|
PRODUCT_PRODUCT_PROPERTIES += \
|
|
persist.sys.fuse.passthrough.enable=true
|
|
|
|
PRODUCT_PACKAGES += \
|
|
bootctrl.lito \
|
|
bootctrl.lito.recovery
|
|
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
ro.cp_system_other_odex=1
|
|
|
|
AB_OTA_POSTINSTALL_CONFIG += \
|
|
RUN_POSTINSTALL_system=true \
|
|
POSTINSTALL_PATH_system=system/bin/otapreopt_script \
|
|
FILESYSTEM_TYPE_system=ext4 \
|
|
POSTINSTALL_OPTIONAL_system=true
|
|
|
|
PRODUCT_PACKAGES += \
|
|
update_engine_sideload
|
|
|
|
PRODUCT_PACKAGES_DEBUG += \
|
|
sg_write_buffer \
|
|
f2fs_io \
|
|
check_f2fs
|
|
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
ro.crypto.volume.filenames_mode=aes-256-cts
|
|
|
|
AB_OTA_POSTINSTALL_CONFIG += \
|
|
RUN_POSTINSTALL_vendor=true \
|
|
POSTINSTALL_PATH_vendor=bin/checkpoint_gc \
|
|
FILESYSTEM_TYPE_vendor=ext4 \
|
|
POSTINSTALL_OPTIONAL_vendor=true
|
|
|
|
# Userdata Checkpointing OTA GC
|
|
PRODUCT_PACKAGES += \
|
|
checkpoint_gc
|
|
|
|
# Context hub HAL
|
|
PRODUCT_PACKAGES += \
|
|
android.hardware.contexthub@1.2-service.generic
|
|
|
|
# CHRE tools
|
|
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
|
|
PRODUCT_PACKAGES += \
|
|
chre_power_test_client \
|
|
chre_test_client
|
|
endif
|
|
|
|
# Enable project quotas and casefolding for emulated storage without sdcardfs
|
|
$(call inherit-product, $(SRC_TARGET_DIR)/product/emulated_storage.mk)
|
|
|
|
# The following modules are included in debuggable builds only.
|
|
PRODUCT_PACKAGES_DEBUG += \
|
|
bootctl \
|
|
r.vendor \
|
|
update_engine_client
|
|
|
|
PRODUCT_COPY_FILES += \
|
|
frameworks/native/data/etc/android.hardware.camera.concurrent.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.concurrent.xml \
|
|
frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.flash-autofocus.xml \
|
|
frameworks/native/data/etc/android.hardware.camera.front.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.front.xml \
|
|
frameworks/native/data/etc/android.hardware.camera.full.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.full.xml\
|
|
frameworks/native/data/etc/android.hardware.camera.raw.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.raw.xml\
|
|
frameworks/native/data/etc/android.hardware.bluetooth.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth.xml \
|
|
frameworks/native/data/etc/android.hardware.bluetooth_le.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth_le.xml \
|
|
frameworks/native/data/etc/android.hardware.context_hub.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.context_hub.xml \
|
|
frameworks/native/data/etc/android.hardware.location.gps.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.location.gps.xml \
|
|
frameworks/native/data/etc/android.hardware.reboot_escrow.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.reboot_escrow.xml \
|
|
frameworks/native/data/etc/android.hardware.telephony.gsm.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.gsm.xml \
|
|
frameworks/native/data/etc/android.hardware.telephony.cdma.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.cdma.xml \
|
|
frameworks/native/data/etc/android.hardware.telephony.ims.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.ims.xml \
|
|
frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \
|
|
frameworks/native/data/etc/android.hardware.wifi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.xml \
|
|
frameworks/native/data/etc/android.hardware.wifi.direct.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.direct.xml \
|
|
frameworks/native/data/etc/android.hardware.wifi.aware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.aware.xml \
|
|
frameworks/native/data/etc/android.hardware.wifi.passpoint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.passpoint.xml \
|
|
frameworks/native/data/etc/android.hardware.wifi.rtt.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.rtt.xml \
|
|
frameworks/native/data/etc/android.software.sip.voip.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.sip.voip.xml \
|
|
frameworks/native/data/etc/android.hardware.usb.accessory.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.accessory.xml \
|
|
frameworks/native/data/etc/android.hardware.usb.host.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.host.xml \
|
|
frameworks/native/data/etc/android.hardware.opengles.aep.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.opengles.aep.xml \
|
|
frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
|
|
frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
|
|
frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
|
|
frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
|
|
frameworks/native/data/etc/android.hardware.vulkan.level-1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.level.xml \
|
|
frameworks/native/data/etc/android.hardware.vulkan.compute-0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.compute.xml \
|
|
frameworks/native/data/etc/android.hardware.vulkan.version-1_1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.version.xml \
|
|
frameworks/native/data/etc/android.software.vulkan.deqp.level-2020-03-01.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.vulkan.deqp.level.xml \
|
|
frameworks/native/data/etc/android.software.opengles.deqp.level-2020-03-01.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.opengles.deqp.level.xml \
|
|
frameworks/native/data/etc/android.hardware.telephony.carrierlock.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.carrierlock.xml \
|
|
frameworks/native/data/etc/android.hardware.strongbox_keystore.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.strongbox_keystore.xml \
|
|
frameworks/native/data/etc/android.hardware.nfc.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.uicc.xml \
|
|
frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
|
|
frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
|
|
frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml
|
|
|
|
# Audio fluence, ns, aec property, voice and media volume steps
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
ro.vendor.audio.sdk.fluencetype=fluencepro \
|
|
persist.vendor.audio.fluence.voicecall=true \
|
|
persist.vendor.audio.fluence.speaker=true \
|
|
persist.vendor.audio.fluence.voicecomm=true \
|
|
persist.vendor.audio.fluence.voicerec=false \
|
|
ro.config.vc_call_vol_steps=7 \
|
|
ro.config.media_vol_steps=25 \
|
|
|
|
# Audio Features
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
vendor.audio.feature.external_dsp.enable=true \
|
|
vendor.audio.feature.external_speaker.enable=true \
|
|
vendor.audio.feature.concurrent_capture.enable=false \
|
|
vendor.audio.feature.a2dp_offload.enable=true \
|
|
vendor.audio.feature.hfp.enable=true \
|
|
vendor.audio.feature.hwdep_cal.enable=true \
|
|
vendor.audio.feature.incall_music.enable=true \
|
|
vendor.audio.feature.maxx_audio.enable=true \
|
|
vendor.audio.feature.spkr_prot.enable=true \
|
|
vendor.audio.feature.usb_offload.enable=true \
|
|
vendor.audio.feature.audiozoom.enable=true \
|
|
vendor.audio.feature.snd_mon.enable=true \
|
|
vendor.audio.feature.multi_voice_session.enable=true \
|
|
vendor.audio.capture.enforce_legacy_copp_sr=true \
|
|
vendor.audio.offload.buffer.size.kb=256 \
|
|
persist.vendor.audio_hal.dsp_bit_width_enforce_mode=24 \
|
|
vendor.audio.offload.gapless.enabled=true \
|
|
|
|
# MaxxAudio effect and add rotation monitor
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
ro.audio.monitorRotation=true
|
|
|
|
# Iaxxx streming and factory binary
|
|
PRODUCT_PACKAGES += \
|
|
libtunnel \
|
|
libodsp \
|
|
adnc_strm.primary.default \
|
|
sound_trigger.primary.lito
|
|
|
|
# Add Oslo test for debug rom
|
|
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
|
|
PRODUCT_PACKAGES += \
|
|
tunneling_hal_test \
|
|
sensor_param_test \
|
|
oslo_config_test \
|
|
odsp_api_test \
|
|
crash_event_logger \
|
|
dump_debug_info \
|
|
get_pwr_stats \
|
|
crash_trigger_test
|
|
endif
|
|
|
|
# graphics
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
ro.opengles.version=196610
|
|
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
ro.vendor.display.paneltype=2 \
|
|
ro.vendor.display.sensortype=1 \
|
|
vendor.display.enable_async_powermode=0 \
|
|
vendor.display.qdcm.mode_combine=1 \
|
|
vendor.display.lbe.supported=1
|
|
|
|
# vndservicemanager has been removed from API30 devices (aosp/1235751)
|
|
# but we still need it for display services.
|
|
PRODUCT_PACKAGES += \
|
|
vndservicemanager
|
|
|
|
# camera google face detection
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.camera.googfd.enable=1
|
|
|
|
# camera hal buffer management
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.camera.managebuffer.enable=1
|
|
|
|
# camera enable RT thread
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.vendor.camera.realtimethread=1
|
|
|
|
# Lets the vendor library that Google Camera HWL is enabled
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.camera.google_hwl.enabled=true \
|
|
persist.camera.google_hwl.name=libgooglecamerahwl_impl.so
|
|
|
|
# camera common HWL
|
|
CAMERA_COMMON_HWL := true
|
|
|
|
# OEM Unlock reporting
|
|
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
|
|
ro.oem_unlock_supported=1
|
|
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.vendor.cne.feature=1 \
|
|
persist.vendor.data.iwlan.enable=true \
|
|
persist.vendor.radio.RATE_ADAPT_ENABLE=1 \
|
|
persist.vendor.radio.ROTATION_ENABLE=1 \
|
|
persist.vendor.radio.VT_ENABLE=1 \
|
|
persist.vendor.radio.VT_HYBRID_ENABLE=1 \
|
|
persist.vendor.radio.apm_sim_not_pwdn=1 \
|
|
persist.vendor.radio.custom_ecc=1 \
|
|
persist.vendor.radio.data_ltd_sys_ind=1 \
|
|
persist.vendor.radio.videopause.mode=1 \
|
|
persist.vendor.radio.mt_sms_ack=30 \
|
|
persist.vendor.radio.multisim_switch_support=true \
|
|
persist.vendor.radio.sib16_support=1 \
|
|
persist.vendor.radio.data_con_rprt=true \
|
|
persist.vendor.radio.relay_oprt_change=1 \
|
|
persist.vendor.radio.no_wait_for_card=1 \
|
|
persist.vendor.radio.sap_silent_pin=1 \
|
|
persist.vendor.radio.manual_nw_rej_ct=1 \
|
|
persist.rcs.supported=1 \
|
|
vendor.rild.libpath=/vendor/lib64/libril-qc-hal-qmi.so \
|
|
ro.hardware.keystore_desede=true \
|
|
persist.vendor.radio.procedure_bytes=SKIP \
|
|
persist.vendor.radio.hidl_dev_service=true \
|
|
|
|
# Enable reboot free DSDS
|
|
PRODUCT_PRODUCT_PROPERTIES += \
|
|
persist.radio.reboot_on_modem_change=false
|
|
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
telephony.active_modems.max_count=2
|
|
|
|
# Disable snapshot timer
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.vendor.radio.snapshot_enabled=0 \
|
|
persist.vendor.radio.snapshot_timer=0
|
|
|
|
# RenderScript HAL
|
|
PRODUCT_PACKAGES += \
|
|
android.hardware.renderscript@1.0-impl
|
|
|
|
# Light HAL
|
|
PRODUCT_PACKAGES += \
|
|
lights.lito
|
|
|
|
# Memtrack HAL
|
|
PRODUCT_PACKAGES += \
|
|
memtrack.lito \
|
|
android.hardware.memtrack@1.0-impl \
|
|
android.hardware.memtrack@1.0-service
|
|
|
|
# Bluetooth HAL
|
|
PRODUCT_PACKAGES += \
|
|
android.hardware.bluetooth@1.0-impl-qti \
|
|
android.hardware.bluetooth@1.0-service-qti
|
|
|
|
#Bluetooth SAR HAL
|
|
PRODUCT_PACKAGES += \
|
|
hardware.google.bluetooth.sar@1.0-impl
|
|
PRODUCT_PACKAGES_DEBUG += \
|
|
bluetooth_sar_test
|
|
|
|
#Bluetooth AFH HAL
|
|
PRODUCT_PACKAGES += \
|
|
hardware.google.bluetooth.bt_channel_avoidance@1.0-impl
|
|
|
|
# Bluetooth SoC
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
vendor.qcom.bluetooth.soc=cherokee
|
|
|
|
# Property for loading BDA from device tree
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
ro.vendor.bt.bdaddr_path=/proc/device-tree/chosen/cdt/cdb2/bt_addr
|
|
|
|
# Bluetooth WiPower
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
ro.vendor.bluetooth.emb_wp_mode=false \
|
|
ro.vendor.bluetooth.wipower=false
|
|
|
|
# DRM HAL
|
|
PRODUCT_PACKAGES += \
|
|
android.hardware.drm@1.4-service.clearkey \
|
|
android.hardware.drm@1.4-service.widevine
|
|
|
|
# NFC and Secure Element packages
|
|
PRODUCT_PACKAGES += \
|
|
NfcNci \
|
|
Tag \
|
|
SecureElement \
|
|
android.hardware.nfc@1.2-service.st \
|
|
android.hardware.secure_element@1.2-service.st
|
|
|
|
PRODUCT_COPY_FILES += \
|
|
device/google/redbull/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
|
|
device/google/redbull/nfc/libese-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libese-hal-st.conf \
|
|
device/google/redbull/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf
|
|
|
|
PRODUCT_PACKAGES += \
|
|
android.hardware.health@2.1-impl-redbull \
|
|
android.hardware.health@2.1-service
|
|
|
|
# Storage health HAL
|
|
PRODUCT_PACKAGES += \
|
|
android.hardware.health.storage@1.0-service
|
|
|
|
PRODUCT_PACKAGES += \
|
|
libmm-omxcore \
|
|
libOmxCore \
|
|
libstagefrighthw \
|
|
libOmxVdec \
|
|
libOmxVdecHevc \
|
|
libOmxVenc \
|
|
libc2dcolorconvert
|
|
|
|
# Enable Codec 2.0
|
|
PRODUCT_PACKAGES += \
|
|
libqcodec2_base \
|
|
libqcodec2_utils \
|
|
libqcodec2_platform \
|
|
libqcodec2_core \
|
|
libqcodec2_basecodec \
|
|
libqcodec2_v4l2codec \
|
|
vendor.qti.media.c2@1.0-service \
|
|
codec2.vendor.ext-arm64.policy \
|
|
codec2.vendor.base-arm64.policy
|
|
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
debug.stagefright.omx_default_rank=512
|
|
|
|
# Create input surface on the framework side
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
debug.stagefright.c2inputsurface=-1 \
|
|
|
|
# Disable OMX
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
vendor.media.omx=0 \
|
|
|
|
# Enable ECO service
|
|
QC2_HAVE_ECO_SERVICE := true
|
|
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
vendor.qc2.venc.avgqp.enable=1
|
|
|
|
# To reach target bitrate in CBR mode for IMS VT Call
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.vendor.ims.mm_minqp=1
|
|
|
|
PRODUCT_PACKAGES += \
|
|
android.hardware.camera.provider@2.7-impl-google \
|
|
android.hardware.camera.provider@2.7-service-google \
|
|
camera.lito \
|
|
lib_multicam_dualfov_capture_session \
|
|
libgooglecamerahwl_impl \
|
|
libqomx_core \
|
|
libmmjpeg_interface \
|
|
libmmcamera_interface \
|
|
libcameradepthcalibrator
|
|
|
|
# Google Camera HAL test libraries in debug builds
|
|
PRODUCT_PACKAGES_DEBUG += \
|
|
libgoogle_camera_hal_proprietary_tests \
|
|
libgoogle_camera_hal_tests
|
|
|
|
PRODUCT_PACKAGES += \
|
|
fs_config_dirs \
|
|
fs_config_files
|
|
|
|
# Boot control HAL
|
|
PRODUCT_PACKAGES += \
|
|
android.hardware.boot@1.2-impl-pixel-legacy \
|
|
android.hardware.boot@1.2-impl-pixel-legacy.recovery \
|
|
android.hardware.boot@1.2-service \
|
|
|
|
#GNSS HAL
|
|
PRODUCT_PACKAGES += \
|
|
libgps.utils \
|
|
libgnss \
|
|
libloc_core \
|
|
liblocation_api \
|
|
libbatching \
|
|
libgeofencing \
|
|
android.hardware.gnss@2.1-impl-qti \
|
|
android.hardware.gnss@2.1-service-qti
|
|
|
|
ENABLE_VENDOR_RIL_SERVICE := true
|
|
|
|
USE_QCRIL_OEMHOOK := true
|
|
|
|
HOSTAPD := hostapd
|
|
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
|
|
HOSTAPD += hostapd_cli
|
|
endif
|
|
PRODUCT_PACKAGES += $(HOSTAPD)
|
|
|
|
WPA := wpa_supplicant.conf
|
|
WPA += wpa_supplicant_wcn.conf
|
|
WPA += wpa_supplicant
|
|
PRODUCT_PACKAGES += $(WPA)
|
|
|
|
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
|
|
PRODUCT_PACKAGES += wpa_cli
|
|
endif
|
|
|
|
# Wifi
|
|
PRODUCT_PACKAGES += \
|
|
android.hardware.wifi@1.0-service \
|
|
wificond \
|
|
libwpa_client \
|
|
WifiOverlay
|
|
|
|
# Connectivity
|
|
PRODUCT_PACKAGES += \
|
|
ConnectivityOverlay
|
|
|
|
# WLAN driver configuration files
|
|
PRODUCT_COPY_FILES += \
|
|
$(LOCAL_PATH)/wpa_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf \
|
|
$(LOCAL_PATH)/p2p_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant_overlay.conf \
|
|
$(LOCAL_PATH)/wifi_concurrency_cfg.txt:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wifi_concurrency_cfg.txt \
|
|
$(LOCAL_PATH)/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/firmware/wlan/qca_cld/WCNSS_qcom_cfg.ini \
|
|
|
|
LIB_NL := libnl_2
|
|
PRODUCT_PACKAGES += $(LIB_NL)
|
|
|
|
# Audio effects
|
|
PRODUCT_PACKAGES += \
|
|
libvolumelistener \
|
|
libqcomvisualizer \
|
|
libqcomvoiceprocessing \
|
|
libqcompostprocbundle
|
|
|
|
PRODUCT_PACKAGES += \
|
|
audio.primary.lito \
|
|
audio.a2dp.default \
|
|
audio.usb.default \
|
|
audio.r_submix.default \
|
|
libaudio-resampler \
|
|
audio.hearing_aid.default \
|
|
audio.bluetooth.default
|
|
|
|
PRODUCT_PACKAGES += \
|
|
android.hardware.audio@7.0-impl:32 \
|
|
android.hardware.audio.effect@7.0-impl:32 \
|
|
android.hardware.soundtrigger@2.3-impl \
|
|
android.hardware.bluetooth.audio@2.0-impl \
|
|
android.hardware.audio.service
|
|
|
|
# Modules for Audio HAL
|
|
PRODUCT_PACKAGES += \
|
|
libcirrusspkrprot \
|
|
libsndmonitor \
|
|
liba2dpoffload \
|
|
btaudio_offload_if \
|
|
libthermallistener \
|
|
libmaxxaudio \
|
|
libaudiozoom \
|
|
libdevicestatelistener
|
|
|
|
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
|
|
PRODUCT_PACKAGES += \
|
|
tinyplay \
|
|
tinycap \
|
|
tinymix \
|
|
tinypcminfo \
|
|
cplay
|
|
endif
|
|
|
|
# Audio hal xmls
|
|
PRODUCT_COPY_FILES += \
|
|
$(LOCAL_PATH)/audio/sound_trigger_platform_info.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_platform_info.xml
|
|
|
|
# Cirrus calibration xml
|
|
PRODUCT_COPY_FILES += \
|
|
$(LOCAL_PATH)/audio/crus_sp_cal_mixer_paths.xml:$(TARGET_COPY_OUT_VENDOR)/etc/crus_sp_cal_mixer_paths.xml
|
|
|
|
# Audio Policy tables
|
|
PRODUCT_COPY_FILES += \
|
|
$(LOCAL_PATH)/bluetooth_hearing_aid_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_hearing_aid_audio_policy_configuration.xml \
|
|
$(LOCAL_PATH)/audio/audio_configs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_configs.xml \
|
|
$(LOCAL_PATH)/audio/audio_effects.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects.xml \
|
|
$(LOCAL_PATH)/audio/audio_io_policy.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_io_policy.conf
|
|
|
|
# Audio ACDB data
|
|
|
|
# Audio ACDB workspace files for QACT
|
|
|
|
# Audio speaker tunning config data
|
|
|
|
# Audio audiozoom config data
|
|
|
|
# RT5514 SoundTrigger
|
|
PRODUCT_COPY_FILES += \
|
|
device/google/redbull/audio/rt5514_dsp_fw1.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw1.bin \
|
|
device/google/redbull/audio/rt5514_dsp_fw2.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw2.bin \
|
|
device/google/redbull/audio/rt5514_dsp_fw3.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw3.bin \
|
|
device/google/redbull/audio/rt5514_dsp_fw4.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw4.bin \
|
|
device/google/redbull/audio/rt5514p_dsp_fw1.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514p_dsp_fw1.bin \
|
|
device/google/redbull/audio/rt5514p_dsp_fw2.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514p_dsp_fw2.bin \
|
|
device/google/redbull/audio/rt5514p_dsp_fw3.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514p_dsp_fw3.bin \
|
|
device/google/redbull/audio/rt5514p_dsp_fw4.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514p_dsp_fw4.bin
|
|
|
|
PRODUCT_COPY_FILES += \
|
|
$(LOCAL_PATH)/media_codecs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs.xml \
|
|
$(LOCAL_PATH)/media_codecs_c2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_c2.xml \
|
|
$(LOCAL_PATH)/media_codecs_performance_c2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_performance_c2.xml \
|
|
$(LOCAL_PATH)/media_codecs_omx.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_omx.xml \
|
|
$(LOCAL_PATH)/video_system_specs.json:$(TARGET_COPY_OUT_VENDOR)/etc/video_system_specs.json \
|
|
frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_audio.xml \
|
|
frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_telephony.xml \
|
|
frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_video.xml \
|
|
$(LOCAL_PATH)/media_profiles_V1_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml
|
|
|
|
# Vendor seccomp policy files for media components:
|
|
PRODUCT_COPY_FILES += \
|
|
$(LOCAL_PATH)/seccomp_policy/mediacodec.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/mediacodec.policy
|
|
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
vendor.audio.snd_card.open.retries=50
|
|
|
|
|
|
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
|
|
# Subsystem ramdump
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.vendor.sys.ssr.enable_ramdumps=1
|
|
endif
|
|
|
|
# Subsystem silent restart
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.vendor.sys.ssr.restart_level=modem,adsp
|
|
|
|
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
|
|
# Sensor debug flag
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.vendor.debug.ash.logger=0 \
|
|
persist.vendor.debug.ash.logger.time=0
|
|
endif
|
|
|
|
# setup dalvik vm configs
|
|
$(call inherit-product, frameworks/native/build/phone-xhdpi-6144-dalvik-heap.mk)
|
|
|
|
# Use the default charger mode images
|
|
PRODUCT_PACKAGES += \
|
|
charger_res_images
|
|
|
|
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
|
|
# b/36703476: Set default log size to 1M
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
ro.logd.size=1M
|
|
# b/114766334: persist all logs by default rotating on 30 files of 1MiB
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
logd.logpersistd=logcatd \
|
|
logd.logpersistd.size=30
|
|
endif
|
|
|
|
# Storage: for factory reset protection feature
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
ro.frp.pst=/dev/block/bootdevice/by-name/frp
|
|
|
|
PRODUCT_PACKAGES += \
|
|
vndk-sp
|
|
|
|
# Override heap growth limit due to high display density on device
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
dalvik.vm.heapgrowthlimit=256m
|
|
|
|
# Use 64-bit dex2oat for better dexopt time.
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
dalvik.vm.dex2oat64.enabled=true
|
|
|
|
PRODUCT_PACKAGES += \
|
|
ipacm \
|
|
IPACM_cfg.xml
|
|
|
|
#Set default CDMA subscription to RUIM
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
ro.telephony.default_cdma_sub=0
|
|
|
|
# Set network mode to Global (NR 5G, LTE, CDMA, EvDo, GSM and WCDMA) by default and no DSDS/DSDA
|
|
PRODUCT_PROPERTY_OVERRIDES += ro.telephony.default_network=27
|
|
|
|
# Set display color mode to Adaptive by default
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.sys.sf.color_saturation=1.0 \
|
|
persist.sys.sf.native_mode=2 \
|
|
persist.sys.sf.color_mode=9
|
|
|
|
# Keymaster configuration
|
|
PRODUCT_COPY_FILES += \
|
|
frameworks/native/data/etc/android.software.device_id_attestation.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.device_id_attestation.xml \
|
|
frameworks/native/data/etc/android.hardware.device_unique_attestation.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.device_unique_attestation.xml
|
|
|
|
# Enable modem logging
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
ro.vendor.radio.log_loc="/data/vendor/modem_dump" \
|
|
ro.vendor.radio.log_prefix="modem_log_"
|
|
|
|
# Enable modem logging for debug
|
|
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.vendor.sys.modem.diag.mdlog=true
|
|
else
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.vendor.sys.modem.diag.mdlog=false
|
|
endif
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.vendor.sys.modem.diag.mdlog_br_num=5
|
|
|
|
# Enable tcpdump_logger on userdebug and eng
|
|
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.vendor.tcpdump.log.alwayson=false \
|
|
persist.vendor.tcpdump.log.br_num=5
|
|
endif
|
|
|
|
# Preopt SystemUI
|
|
PRODUCT_DEXPREOPT_SPEED_APPS += \
|
|
SystemUIGoogle
|
|
|
|
# Enable stats logging in LMKD
|
|
TARGET_LMKD_STATS_LOG := true
|
|
|
|
PRODUCT_COPY_FILES += \
|
|
$(LOCAL_PATH)/init.gadgethal.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.gadgethal.sh
|
|
|
|
# default usb oem functions
|
|
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.vendor.usb.usbradio.config=diag
|
|
endif
|
|
|
|
# Enable app/sf phase offset as durations. The numbers below are translated from the existing
|
|
# positive offsets by finding the duration app/sf will have with the offsets.
|
|
# For SF the previous value was 6ms which under 16.6ms vsync time (60Hz) will leave SF with ~10.5ms
|
|
# for each frame. For App the previous value was 2ms which under 16.6ms vsync time will leave the
|
|
# App with ~20.5ms (16.6ms * 2 - 10.5ms - 2ms). The other values were calculated similarly.
|
|
# Full comparison between the old vs. the new values are captured in
|
|
# https://docs.google.com/spreadsheets/d/1a_5cVNY3LUAkeg-yL56rYQNwved6Hy-dvEcKSxp6f8k/edit
|
|
|
|
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.use_phase_offsets_as_durations=1
|
|
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.late.sf.duration=10500000
|
|
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.late.app.duration=20500000
|
|
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.early.sf.duration=16000000
|
|
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.early.app.duration=16500000
|
|
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.earlyGl.sf.duration=13500000
|
|
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.earlyGl.app.duration=21000000
|
|
|
|
# Do not skip init trigger by default
|
|
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
|
|
vendor.skip.init=0
|
|
|
|
# Enable backpressure for GL comp
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
debug.sf.enable_gl_backpressure=1
|
|
|
|
BOARD_USES_QCNE := true
|
|
|
|
PRODUCT_COPY_FILES += \
|
|
$(LOCAL_PATH)/sec_config:$(TARGET_COPY_OUT_VENDOR)/etc/sec_config
|
|
|
|
# GPS configuration file
|
|
PRODUCT_COPY_FILES += \
|
|
$(LOCAL_PATH)/gps.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gps.conf
|
|
|
|
# dynamic partition
|
|
PRODUCT_USE_DYNAMIC_PARTITIONS := true
|
|
|
|
# Use /product/etc/fstab.postinstall to mount system_other
|
|
PRODUCT_PRODUCT_PROPERTIES += \
|
|
ro.postinstall.fstab.prefix=/product
|
|
|
|
PRODUCT_COPY_FILES += \
|
|
$(LOCAL_PATH)/fstab.postinstall:$(TARGET_COPY_OUT_PRODUCT)/etc/fstab.postinstall
|
|
|
|
# powerstats HAL
|
|
PRODUCT_PACKAGES += \
|
|
android.hardware.power.stats@1.0-service.pixel
|
|
|
|
QTI_TELEPHONY_UTILS := qti-telephony-utils
|
|
QTI_TELEPHONY_UTILS += qti_telephony_utils.xml
|
|
PRODUCT_PACKAGES += $(QTI_TELEPHONY_UTILS)
|
|
|
|
HIDL_WRAPPER := qti-telephony-hidl-wrapper
|
|
HIDL_WRAPPER += qti_telephony_hidl_wrapper.xml
|
|
HIDL_WRAPPER += qti-telephony-hidl-wrapper-prd
|
|
HIDL_WRAPPER += qti_telephony_hidl_wrapper_prd.xml
|
|
PRODUCT_PACKAGES += $(HIDL_WRAPPER)
|
|
|
|
# Increment the SVN for any official public releases
|
|
ifeq ($(PRODUCT_DEVICE_SVN_OVERRIDE),)
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
ro.vendor.build.svn=35
|
|
endif
|
|
|
|
# Enable iwlan service logging for debug
|
|
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
|
|
PRODUCT_PROPERTY_OVERRIDES += persist.vendor.iwlan.logging.logcat=true
|
|
endif
|
|
|
|
PRODUCT_COPY_FILES += \
|
|
$(LOCAL_PATH)/powerhint.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json
|
|
|
|
PRODUCT_COPY_FILES += \
|
|
$(LOCAL_PATH)/task_profiles.json:$(TARGET_COPY_OUT_VENDOR)/etc/task_profiles.json
|
|
|
|
# Set Vendor SPL to match platform
|
|
VENDOR_SECURITY_PATCH = $(PLATFORM_SECURITY_PATCH)
|
|
|
|
PRODUCT_PROPERTY_OVERRIDES += vendor.audio.adm.buffering.ms=2
|
|
PRODUCT_PROPERTY_OVERRIDES += vendor.audio_hal.period_multiplier=2
|
|
PRODUCT_PROPERTY_OVERRIDES += af.fast_track_multiplier=1
|
|
|
|
# Enable AAudio MMAP/NOIRQ data path.
|
|
# 1 is AAUDIO_POLICY_NEVER means only use Legacy path.
|
|
# 2 is AAUDIO_POLICY_AUTO means try MMAP then fallback to Legacy path.
|
|
# 3 is AAUDIO_POLICY_ALWAYS means only use MMAP path.
|
|
PRODUCT_PROPERTY_OVERRIDES += aaudio.mmap_policy=2
|
|
# 1 is AAUDIO_POLICY_NEVER means only use SHARED mode
|
|
# 2 is AAUDIO_POLICY_AUTO means try EXCLUSIVE then fallback to SHARED mode.
|
|
# 3 is AAUDIO_POLICY_ALWAYS means only use EXCLUSIVE mode.
|
|
PRODUCT_PROPERTY_OVERRIDES += aaudio.mmap_exclusive_policy=2
|
|
|
|
# Increase the apparent size of a hardware burst from 1 msec to 2 msec.
|
|
# A "burst" is the number of frames processed at one time.
|
|
# That is an increase from 48 to 96 frames at 48000 Hz.
|
|
# The DSP will still be bursting at 48 frames but AAudio will think the burst is 96 frames.
|
|
# A low number, like 48, might increase power consumption or stress the system.
|
|
PRODUCT_PROPERTY_OVERRIDES += aaudio.hw_burst_min_usec=2000
|
|
|
|
# A2DP offload enabled for compilation
|
|
AUDIO_FEATURE_ENABLED_A2DP_OFFLOAD := true
|
|
|
|
# A2DP offload supported
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
ro.bluetooth.a2dp_offload.supported=true
|
|
|
|
# A2DP offload disabled (UI toggle property)
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.bluetooth.a2dp_offload.disabled=false
|
|
|
|
# A2DP offload DSP supported encoder list
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac
|
|
|
|
# Enable AAC frame ctl for A2DP sinks
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.vendor.bt.aac_frm_ctl.enabled=true
|
|
|
|
# Enable VBR frame ctl
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.vendor.bt.aac_vbr_frm_ctl.enabled=true
|
|
|
|
# Set lmkd options
|
|
PRODUCT_PRODUCT_PROPERTIES += \
|
|
ro.config.low_ram = false \
|
|
ro.lmk.log_stats = true \
|
|
|
|
# charger
|
|
PRODUCT_PRODUCT_PROPERTIES += \
|
|
ro.charger.enable_suspend=true
|
|
|
|
# Modem logging file
|
|
PRODUCT_COPY_FILES += \
|
|
device/google/redbull/init.logging.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).logging.rc
|
|
|
|
# Pixelstats broken mic detection
|
|
PRODUCT_PROPERTY_OVERRIDES += vendor.audio.mic_break=true
|
|
|
|
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.use_color_management=true
|
|
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.has_wide_color_display=true
|
|
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.has_HDR_display=true
|
|
|
|
# Audio low latency feature
|
|
PRODUCT_COPY_FILES += \
|
|
frameworks/native/data/etc/android.hardware.audio.low_latency.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.low_latency.xml
|
|
|
|
# Pro audio feature
|
|
PRODUCT_COPY_FILES += \
|
|
frameworks/native/data/etc/android.hardware.audio.pro.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.pro.xml
|
|
|
|
# Must align with HAL types Dataspace
|
|
# The data space of wide color gamut composition preference is Dataspace::DISPLAY_P3
|
|
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.wcg_composition_dataspace=143261696
|
|
|
|
# MIDI feature
|
|
PRODUCT_COPY_FILES += \
|
|
frameworks/native/data/etc/android.software.midi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.midi.xml
|
|
|
|
# Set thermal warm reset
|
|
PRODUCT_PRODUCT_PROPERTIES += \
|
|
ro.thermal_warmreset = true \
|
|
|
|
# Vendor verbose logging default property
|
|
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.vendor.verbose_logging_enabled=true
|
|
else
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
persist.vendor.verbose_logging_enabled=false
|
|
endif
|
|
|
|
# Disable Rescue Party on userdebug & eng build
|
|
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
|
|
PRODUCT_PRODUCT_PROPERTIES += \
|
|
persist.sys.disable_rescue=true
|
|
endif
|
|
|
|
# Set support one-handed mode
|
|
PRODUCT_PRODUCT_PROPERTIES += \
|
|
ro.support_one_handed_mode=true
|
|
|
|
# Enable Incremental on the device via kernel module
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
ro.incremental.enable=module:/vendor/lib/modules/incrementalfs.ko
|
|
|
|
# Enforce generic ramdisk allow list
|
|
$(call inherit-product, $(SRC_TARGET_DIR)/product/generic_ramdisk.mk)
|
|
|
|
# Enable watchdog timeout loop breaker.
|
|
PRODUCT_PROPERTY_OVERRIDES += \
|
|
framework_watchdog.fatal_window.second=600 \
|
|
framework_watchdog.fatal_count=3
|
|
|
|
# Set system properties identifying the chipset
|
|
PRODUCT_VENDOR_PROPERTIES += ro.soc.manufacturer=Qualcomm
|
|
PRODUCT_VENDOR_PROPERTIES += ro.soc.model=SM7250
|
|
|
|
# Include the redbull product FCM
|
|
# (TODO: b/169535506) This includes the FCM for system_ext and product partition.
|
|
# Vendor Freeze system-only builds use a different FCM.
|
|
ifneq ($(PRODUCT_VENDOR_FREEZE_SYSTEM_BUILD),true)
|
|
PRODUCT_PACKAGES += redbull_product_compatibility_matrix.xml
|
|
endif
|
|
|
|
#################################################################################
|
|
# This is the End of device-common.mk file.
|
|
# Now, Pickup other split device-common.mk files:
|
|
#################################################################################
|
|
|
|
# Display
|
|
-include hardware/qcom/sm7250/display/config/display-product.mk
|
|
-include vendor/qcom/sm7250/proprietary/display/config/display-product-proprietary.mk
|
|
|
|
# Security
|
|
-include vendor/qcom/sm7250/proprietary/securemsm/config/keymaster_vendor_proprietary_board.mk
|
|
-include vendor/qcom/sm7250/proprietary/securemsm/config/keymaster_vendor_proprietary_product.mk
|
|
-include vendor/qcom/sm7250/proprietary/securemsm/config/cpz_vendor_proprietary_board.mk
|
|
-include vendor/qcom/sm7250/proprietary/securemsm/config/cpz_vendor_proprietary_product.mk
|
|
-include vendor/qcom/sm7250/proprietary/securemsm/config/smcinvoke_vendor_proprietary_product.mk
|
|
-include vendor/qcom/sm7250/proprietary/commonsys/securemsm/securemsm_system_product.mk
|
|
|
|
# RIL
|
|
-include vendor/qcom/sm7250/proprietary/commonsys-intf/data/data_commonsys-intf_vendor_product.mk
|
|
|
|
# Sensor
|
|
ifneq ($(wildcard vendor/google/tools),)
|
|
ENABLE_SENSOR_SSC_FOR_SOONG := true
|
|
endif
|
|
-include vendor/qcom/sm7250/proprietary/sensors-see/build_config/sns_vendor_board.mk
|
|
-include vendor/qcom/sm7250/proprietary/sensors-see/build_config/sns_vendor_product.mk
|
|
|
|
# Project
|
|
include hardware/google/pixel/common/pixel-common-device.mk
|
|
|
|
# Citadel
|
|
include hardware/google/pixel/citadel/citadel.mk
|
|
|
|
# Factory OTA
|
|
-include vendor/google/factoryota/client/factoryota.mk
|
|
|
|
# storage
|
|
-include hardware/google/pixel/pixelstats/device.mk
|
|
|
|
# thermal
|
|
-include hardware/google/pixel/thermal/device.mk
|
|
|
|
# power HAL
|
|
-include hardware/google/pixel/power-libperfmgr/aidl/device.mk
|
|
|
|
# mm_event
|
|
-include hardware/google/pixel/mm/device.mk
|
|
|
|
# Pixel Logger
|
|
include hardware/google/pixel/PixelLogger/PixelLogger.mk
|
|
|
|
ifneq ($(wildcard vendor/qcom/sm7250/proprietary/prebuilt_grease),)
|
|
-include $(LOCAL_PATH)/redbull_allowlist.mk
|
|
endif
|
|
#################################################################################
|