You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
133 lines
3.9 KiB
133 lines
3.9 KiB
#! /bin/sh -x
|
|
#
|
|
# sample script on using the ingress capabilities
|
|
# This script fwmark tags(IPchains) based on metering on the ingress
|
|
# interface the result is used for fast classification and re-marking
|
|
# on the egress interface
|
|
# This is an example of a color blind mode marker with no PIR configured
|
|
# based on draft-wahjak-mcm-00.txt (section 3.1)
|
|
#
|
|
#path to various utilities;
|
|
#change to reflect yours.
|
|
#
|
|
IPROUTE=/root/DS-6-beta/iproute2-990530-dsing
|
|
TC=$IPROUTE/tc/tc
|
|
IP=$IPROUTE/ip/ip
|
|
IPCHAINS=/root/DS-6-beta/ipchains-1.3.9/ipchains
|
|
INDEV=eth2
|
|
EGDEV="dev eth1"
|
|
CIR1=1500kbit
|
|
CIR2=1000kbit
|
|
|
|
#The CBS is about 60 MTU sized packets
|
|
CBS1=90k
|
|
CBS2=90k
|
|
|
|
meter1="police rate $CIR1 burst $CBS1 "
|
|
meter2="police rate $CIR1 burst $CBS2 "
|
|
meter3="police rate $CIR2 burst $CBS1 "
|
|
meter4="police rate $CIR2 burst $CBS2 "
|
|
meter5="police rate $CIR2 burst $CBS2 "
|
|
#
|
|
# tag the rest of incoming packets from subnet 10.2.0.0/24 to fw value 1
|
|
# tag all incoming packets from any other subnet to fw tag 2
|
|
############################################################
|
|
$IPCHAINS -A input -i $INDEV -s 0/0 -m 2
|
|
$IPCHAINS -A input -i $INDEV -s 10.2.0.0/24 -m 1
|
|
#
|
|
############################################################
|
|
# install the ingress qdisc on the ingress interface
|
|
$TC qdisc add dev $INDEV handle ffff: ingress
|
|
#
|
|
############################################################
|
|
|
|
# All packets are marked with a tcindex value which is used on the egress
|
|
# tcindex 1 maps to AF41, 2->AF42, 3->AF43, 4->BE
|
|
#
|
|
############################################################
|
|
#
|
|
# anything with fw tag of 1 is passed on with a tcindex value 1
|
|
#if it doesnt exceed its allocated rate (CIR/CBS)
|
|
#
|
|
$TC filter add dev $INDEV parent ffff: protocol ip prio 4 handle 1 fw \
|
|
$meter1 \
|
|
continue flowid 4:1
|
|
#
|
|
# if it exceeds the above but not the extra rate/burst below, it gets a
|
|
#tcindex value of 2
|
|
#
|
|
$TC filter add dev $INDEV parent ffff: protocol ip prio 5 handle 1 fw \
|
|
$meter2 \
|
|
continue flowid 4:2
|
|
#
|
|
# if it exceeds the above but not the rule below, it gets a tcindex value
|
|
# of 3
|
|
#
|
|
$TC filter add dev $INDEV parent ffff: protocol ip prio 6 handle 1 fw \
|
|
$meter3 \
|
|
drop flowid 4:3
|
|
#
|
|
# Anything else (not from the subnet 10.2.0.24/24) gets discarded if it
|
|
# exceeds 1Mbps and by default goes to BE if it doesnt
|
|
#
|
|
$TC filter add dev $INDEV parent ffff: protocol ip prio 6 handle 2 fw \
|
|
$meter5 \
|
|
drop flowid 4:4
|
|
|
|
|
|
######################## Egress side ########################
|
|
|
|
|
|
# attach a dsmarker
|
|
#
|
|
$TC qdisc add $EGDEV handle 1:0 root dsmark indices 64
|
|
#
|
|
# values of the DSCP to change depending on the class
|
|
#note that the ECN bits are masked out
|
|
#
|
|
#AF41 (0x88 is 0x22 shifted to the right by two bits)
|
|
#
|
|
$TC class change $EGDEV classid 1:1 dsmark mask 0x3 \
|
|
value 0x88
|
|
#AF42
|
|
$TC class change $EGDEV classid 1:2 dsmark mask 0x3 \
|
|
value 0x90
|
|
#AF43
|
|
$TC class change $EGDEV classid 1:3 dsmark mask 0x3 \
|
|
value 0x98
|
|
#BE
|
|
$TC class change $EGDEV classid 1:4 dsmark mask 0x3 \
|
|
value 0x0
|
|
#
|
|
#
|
|
# The class mapping (using tcindex; could easily have
|
|
# replaced it with the fw classifier instead)
|
|
#
|
|
$TC filter add $EGDEV parent 1:0 protocol ip prio 1 \
|
|
handle 1 tcindex classid 1:1
|
|
$TC filter add $EGDEV parent 1:0 protocol ip prio 1 \
|
|
handle 2 tcindex classid 1:2
|
|
$TC filter add $EGDEV parent 1:0 protocol ip prio 1 \
|
|
handle 3 tcindex classid 1:3
|
|
$TC filter add $EGDEV parent 1:0 protocol ip prio 1 \
|
|
handle 4 tcindex classid 1:4
|
|
#
|
|
|
|
#
|
|
echo "---- qdisc parameters Ingress ----------"
|
|
$TC qdisc ls dev $INDEV
|
|
echo "---- Class parameters Ingress ----------"
|
|
$TC class ls dev $INDEV
|
|
echo "---- filter parameters Ingress ----------"
|
|
$TC filter ls dev $INDEV parent ffff:
|
|
|
|
echo "---- qdisc parameters Egress ----------"
|
|
$TC qdisc ls $EGDEV
|
|
echo "---- Class parameters Egress ----------"
|
|
$TC class ls $EGDEV
|
|
echo "---- filter parameters Egress ----------"
|
|
$TC filter ls $EGDEV parent 1:0
|
|
#
|
|
#deleting the ingress qdisc
|
|
#$TC qdisc del $INDEV ingress
|