You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

832 lines
25 KiB

# Copyright (c) 1993, 1994, 1995, 1996
# The Regents of the University of California. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that: (1) source code distributions
# retain the above copyright notice and this paragraph in its entirety, (2)
# distributions including binary code include the above copyright notice and
# this paragraph in its entirety in the documentation or other materials
# provided with the distribution, and (3) all advertising materials mentioning
# features or use of this software display the following acknowledgement:
# ``This product includes software developed by the University of California,
# Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
# the University nor the names of its contributors may be used to endorse
# or promote products derived from this software without specific prior
# written permission.
# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
#
# Various configurable paths (remember to edit Makefile.in, not Makefile)
#
# Top level hierarchy
prefix = @prefix@
exec_prefix = @exec_prefix@
datarootdir = @datarootdir@
# Pathname of directory to install the configure program
bindir = @bindir@
# Pathname of directory to install the rpcapd daemon
sbindir = @sbindir@
# Pathname of directory to install the include files
includedir = @includedir@
# Pathname of directory to install the library
libdir = @libdir@
# Pathname of directory to install the man pages
mandir = @mandir@
# VPATH
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
#
# You shouldn't need to edit anything below.
#
LD = /usr/bin/ld
CC = @CC@
AR = @AR@
LN_S = @LN_S@
MKDEP = @MKDEP@
CCOPT = @V_CCOPT@
SHLIB_CCOPT = @V_SHLIB_CCOPT@
INCLS = -I. @V_INCLS@
DEFS = -DBUILDING_PCAP -Dpcap_EXPORTS @DEFS@ @V_DEFS@
ADDLOBJS = @ADDLOBJS@
ADDLARCHIVEOBJS = @ADDLARCHIVEOBJS@
LIBS = @LIBS@
CROSSFLAGS=
CFLAGS = @CFLAGS@ ${CROSSFLAGS}
LDFLAGS = @LDFLAGS@ ${CROSSFLAGS}
DYEXT = @DYEXT@
V_RPATH_OPT = @V_RPATH_OPT@
DEPENDENCY_CFLAG = @DEPENDENCY_CFLAG@
PROG=libpcap
PTHREAD_LIBS=@PTHREAD_LIBS@
BUILD_RPCAPD=@BUILD_RPCAPD@
INSTALL_RPCAPD=@INSTALL_RPCAPD@
EXTRA_NETWORK_LIBS=@EXTRA_NETWORK_LIBS@
# Standard CFLAGS for building members of a shared library
FULL_CFLAGS = $(CCOPT) @V_LIB_CCOPT_FAT@ $(SHLIB_CCOPT) $(INCLS) $(DEFS) $(CFLAGS)
CXXFLAGS = $(CCOPT) @V_LIB_CCOPT_FAT@ $(SHLIB_CCOPT) $(INCLS) $(DEFS) $(CFLAGS)
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
RANLIB = @RANLIB@
LEX = @LEX@
YACC = @YACC@
# Explicitly define compilation rule since SunOS 4's make doesn't like gcc.
# Also, gcc does not remove the .o before forking 'as', which can be a
# problem if you don't own the file but can write to the directory.
.c.o:
@rm -f $@
$(CC) $(FULL_CFLAGS) -c $(srcdir)/$*.c
PLATFORM_C_SRC = @PLATFORM_C_SRC@
PLATFORM_CXX_SRC = @PLATFORM_CXX_SRC@
MODULE_C_SRC = @MODULE_C_SRC@
REMOTE_C_SRC = @REMOTE_C_SRC@
COMMON_C_SRC = pcap.c gencode.c optimize.c nametoaddr.c etherent.c \
fmtutils.c \
savefile.c sf-pcap.c sf-pcapng.c pcap-common.c \
bpf_image.c bpf_filter.c bpf_dump.c
GENERATED_C_SRC = scanner.c grammar.c
LIBOBJS = @LIBOBJS@
SRC = $(PLATFORM_C_SRC) $(PLATFORM_CXX_SRC) \
$(MODULE_C_SRC) $(REMOTE_C_SRC) $(COMMON_C_SRC) \
$(GENERATED_C_SRC)
# We would like to say "OBJ = $(SRC:.c=.o)" but Ultrix's make cannot
# hack the extra indirection, and we have to handle PLATFORM_CXX_SRC
# differently from the defines for C source
OBJ = $(PLATFORM_C_SRC:.c=.o) $(PLATFORM_CXX_SRC:.cpp=.o) \
$(MODULE_C_SRC:.c=.o) $(REMOTE_C_SRC:.c=.o) $(COMMON_C_SRC:.c=.o) \
$(GENERATED_C_SRC:.c=.o) \
$(LIBOBJS)
PUBHDR = \
pcap.h \
pcap-bpf.h \
pcap-namedb.h \
pcap/bpf.h \
pcap/bluetooth.h \
pcap/can_socketcan.h \
pcap/compiler-tests.h \
pcap/dlt.h \
pcap/funcattrs.h \
pcap/pcap-inttypes.h \
pcap/ipnet.h \
pcap/namedb.h \
pcap/nflog.h \
pcap/pcap.h \
pcap/sll.h \
pcap/socket.h \
pcap/vlan.h \
pcap/usb.h
HDR = $(PUBHDR) \
arcnet.h \
atmuni31.h \
diag-control.h \
ethertype.h \
extract.h \
fmtutils.h \
ftmacros.h \
gencode.h \
ieee80211.h \
llc.h \
nametoaddr.h \
nlpid.h \
optimize.h \
pcap-common.h \
pcap-int.h \
pcap-rpcap.h \
pcap-types.h \
portability.h \
ppp.h \
rpcap-protocol.h \
sf-pcap.h \
sf-pcapng.h \
sunatmpos.h \
varattrs.h
GENHDR = \
scanner.h grammar.h
TAGFILES = \
$(SRC) $(HDR)
CLEANFILES = $(OBJ) libpcap.a libpcap.so.`cat $(srcdir)/VERSION` \
$(PROG)-`cat $(srcdir)/VERSION`.tar.gz $(GENERATED_C_SRC) $(GENHDR) \
lex.yy.c pcap-config libpcap.pc
MAN1 = pcap-config.1
MAN3PCAP_EXPAND = \
pcap.3pcap.in \
pcap_compile.3pcap.in \
pcap_datalink.3pcap.in \
pcap_dump_open.3pcap.in \
pcap_get_tstamp_precision.3pcap.in \
pcap_list_datalinks.3pcap.in \
pcap_list_tstamp_types.3pcap.in \
pcap_open_dead.3pcap.in \
pcap_open_offline.3pcap.in \
pcap_set_immediate_mode.3pcap.in \
pcap_set_tstamp_precision.3pcap.in \
pcap_set_tstamp_type.3pcap.in
MAN3PCAP_NOEXPAND = \
pcap_activate.3pcap \
pcap_breakloop.3pcap \
pcap_can_set_rfmon.3pcap \
pcap_close.3pcap \
pcap_create.3pcap \
pcap_datalink_name_to_val.3pcap \
pcap_datalink_val_to_name.3pcap \
pcap_dump.3pcap \
pcap_dump_close.3pcap \
pcap_dump_file.3pcap \
pcap_dump_flush.3pcap \
pcap_dump_ftell.3pcap \
pcap_file.3pcap \
pcap_fileno.3pcap \
pcap_findalldevs.3pcap \
pcap_freecode.3pcap \
pcap_get_required_select_timeout.3pcap \
pcap_get_selectable_fd.3pcap \
pcap_geterr.3pcap \
pcap_init.3pcap \
pcap_inject.3pcap \
pcap_is_swapped.3pcap \
pcap_lib_version.3pcap \
pcap_lookupdev.3pcap \
pcap_lookupnet.3pcap \
pcap_loop.3pcap \
pcap_major_version.3pcap \
pcap_next_ex.3pcap \
pcap_offline_filter.3pcap \
pcap_open_live.3pcap \
pcap_set_buffer_size.3pcap \
pcap_set_datalink.3pcap \
pcap_set_promisc.3pcap \
pcap_set_protocol_linux.3pcap \
pcap_set_rfmon.3pcap \
pcap_set_snaplen.3pcap \
pcap_set_timeout.3pcap \
pcap_setdirection.3pcap \
pcap_setfilter.3pcap \
pcap_setnonblock.3pcap \
pcap_snapshot.3pcap \
pcap_stats.3pcap \
pcap_statustostr.3pcap \
pcap_strerror.3pcap \
pcap_tstamp_type_name_to_val.3pcap \
pcap_tstamp_type_val_to_name.3pcap
MAN3PCAP = $(MAN3PCAP_NOEXPAND) $(MAN3PCAP_EXPAND:.in=)
MANFILE = \
pcap-savefile.manfile.in
MANMISC = \
pcap-filter.manmisc.in \
pcap-linktype.manmisc.in \
pcap-tstamp.manmisc.in
EXTRA_DIST = \
CHANGES \
ChmodBPF/ChmodBPF \
ChmodBPF/StartupParameters.plist \
CREDITS \
CMakeLists.txt \
INSTALL.md \
LICENSE \
Makefile.in \
Makefile-devel-adds \
README.md \
doc \
CONTRIBUTING.md \
TODO \
VERSION \
aclocal.m4 \
charconv.c \
charconv.h \
chmod_bpf \
cmake_uninstall.cmake.in \
cmakeconfig.h.in \
cmake/Modules/FindDAG.cmake \
cmake/Modules/Finddpdk.cmake \
cmake/Modules/FindFseeko.cmake \
cmake/Modules/FindLFS.cmake \
cmake/Modules/FindPacket.cmake \
cmake/Modules/FindSNF.cmake \
cmake/Modules/FindTC.cmake \
cmake/have_siocglifconf.c \
config.guess \
config.h.in \
config.sub \
configure \
configure.ac \
dlpisubs.c \
dlpisubs.h \
fad-getad.c \
fad-gifc.c \
fad-glifc.c \
grammar.y.in \
install-sh \
lbl/os-aix4.h \
lbl/os-aix7.h \
lbl/os-hpux11.h \
lbl/os-osf4.h \
lbl/os-osf5.h \
lbl/os-solaris2.h \
lbl/os-sunos4.h \
lbl/os-ultrix4.h \
libpcap.pc.in \
missing/asprintf.c \
missing/getopt.c \
missing/getopt.h \
missing/strlcat.c \
missing/strlcpy.c \
missing/strtok_r.c \
missing/win_asprintf.c \
mkdep \
msdos/bin2c.c \
msdos/makefile \
msdos/makefile.dj \
msdos/makefile.wc \
msdos/pkt_rx0.asm \
msdos/pkt_rx1.s \
msdos/pktdrvr.c \
msdos/pktdrvr.h \
msdos/readme.dos \
nomkdep \
org.tcpdump.chmod_bpf.plist \
pcap-airpcap.c \
pcap-airpcap.h \
pcap-bpf.c \
pcap-bt-linux.c \
pcap-bt-linux.h \
pcap-bt-monitor-linux.c \
pcap-bt-monitor-linux.h \
pcap-config.in \
pcap-dag.c \
pcap-dag.h \
pcap-dbus.c \
pcap-dbus.h \
pcap-dll.rc \
pcap-dlpi.c \
pcap-dos.c \
pcap-dos.h \
pcap-dpdk.c \
pcap-dpdk.h \
pcap-enet.c \
pcap-haiku.cpp \
pcap-int.h \
pcap-libdlpi.c \
pcap-linux.c \
pcap-namedb.h \
pcap-new.c \
pcap-netfilter-linux.c \
pcap-netfilter-linux.h \
pcap-netmap.c \
pcap-netmap.h \
pcap-nit.c \
pcap-npf.c \
pcap-null.c \
pcap-pf.c \
pcap-rdmasniff.c \
pcap-rdmasniff.h \
pcap-rpcap.c \
pcap-rpcap-int.h \
pcap-septel.c \
pcap-septel.h \
pcap-sita.h \
pcap-sita.c \
pcap-sita.html \
pcap-snf.c \
pcap-snf.h \
pcap-snit.c \
pcap-snoop.c \
pcap-tc.c \
pcap-tc.h \
pcap-usb-linux.c \
pcap-usb-linux.h \
rpcap-protocol.c \
rpcapd/CMakeLists.txt \
rpcapd/Makefile.in \
rpcapd/config_params.h \
rpcapd/daemon.h \
rpcapd/daemon.c \
rpcapd/fileconf.c \
rpcapd/fileconf.h \
rpcapd/log.h \
rpcapd/log.c \
rpcapd/org.tcpdump.rpcapd.plist \
rpcapd/rpcapd.c \
rpcapd/rpcapd.h \
rpcapd/rpcapd.inetd.conf \
rpcapd/rpcapd.manadmin.in \
rpcapd/rpcapd-config.manfile.in \
rpcapd/rpcapd.rc \
rpcapd/rpcapd.socket \
rpcapd/rpcapd.xinetd.conf \
rpcapd/rpcapd@.service \
rpcapd/win32-svc.c \
rpcapd/win32-svc.h \
sockutils.c \
sockutils.h \
sslutils.c \
sslutils.h \
scanner.l \
testprogs/CMakeLists.txt \
testprogs/Makefile.in \
testprogs/can_set_rfmon_test.c \
testprogs/capturetest.c \
testprogs/filtertest.c \
testprogs/findalldevstest.c \
testprogs/findalldevstest-perf.c \
testprogs/fuzz/CMakeLists.txt \
testprogs/fuzz/fuzz_both.c \
testprogs/fuzz/fuzz_both.options \
testprogs/fuzz/fuzz_filter.c \
testprogs/fuzz/fuzz_filter.options \
testprogs/fuzz/fuzz_pcap.c \
testprogs/fuzz/fuzz_pcap.options \
testprogs/fuzz/onefile.c \
testprogs/opentest.c \
testprogs/reactivatetest.c \
testprogs/selpolltest.c \
testprogs/threadsignaltest.c \
testprogs/unix.h \
testprogs/valgrindtest.c \
testprogs/visopts.py \
testprogs/writecaptest.c \
tests/shb-option-too-long.pcapng \
Win32/Prj/wpcap.sln \
Win32/Prj/wpcap.vcxproj \
Win32/Prj/wpcap.vcxproj.filters
all: libpcap.a shared $(BUILD_RPCAPD) libpcap.pc pcap-config
libpcap.a: $(OBJ)
@rm -f $@
$(AR) rc $@ $(OBJ) $(ADDLARCHIVEOBJS)
$(RANLIB) $@
shared: libpcap.$(DYEXT)
libpcap.so: $(OBJ)
@rm -f $@
VER=`cat $(srcdir)/VERSION`; \
MAJOR_VER=`sed 's/\([0-9][0-9]*\)\..*/\1/' $(srcdir)/VERSION`; \
@V_SHLIB_CMD@ $(LDFLAGS) @V_SHLIB_OPT@ @V_SONAME_OPT@$@.$$MAJOR_VER \
-o $@.$$VER $(OBJ) $(ADDLOBJS) $(LIBS)
#
# The following rule succeeds, but the result is untested.
#
# In macOS, the libpcap dylib has the name "libpcap.A.dylib", with its
# full path as the install_name, and with the compatibility and current
# version both set to 1. The compatibility version is set to 1 so that
# programs built with a newer version of the library will run against
# older versions if they don't use APIs available in the newer version
# but not in the older version.
#
# We also use "A" as the major version, and 1 as the compatibility version,
# but set the current version to the value in VERSION, with any non-numeric
# stuff stripped off (the compatibility and current version must be of the
# form X[.Y[.Z]], with Y and Z possibly absent, and with all components
# numeric).
#
libpcap.dylib: $(OBJ)
rm -f libpcap*.dylib
VER=`cat $(srcdir)/VERSION`; \
MAJOR_VER=A; \
COMPAT_VER=1; \
CURRENT_VER=`sed 's/[^0-9.].*$$//' $(srcdir)/VERSION`; \
$(CC) -dynamiclib -undefined error $(LDFLAGS) @V_LIB_LDFLAGS_FAT@ \
-o libpcap.$$VER.dylib $(OBJ) $(ADDLOBJS) $(LIBS) \
-install_name $(libdir)/libpcap.$$MAJOR_VER.dylib \
-compatibility_version $$COMPAT_VER \
-current_version $$CURRENT_VER
#
# The HP-UX linker manual says that the convention for a versioned library
# is libXXX.{number}, not libXXX.sl.{number}. That appears to be the case
# on at least one HP-UX 11.00 system; libXXX.sl is a symlink to
# libXXX.{number}.
#
# The manual also says "library-level versioning" (think "sonames") was
# added in HP-UX 10.0.
#
# XXX - this assumes we're using the HP linker, rather than the GNU
# linker, even with GCC.
#
libpcap.sl: $(OBJ)
@MAJOR_VER=`sed 's/\([0-9][0-9]*\)\..*/\1/' $(srcdir)/VERSION`; \
rm -f libpcap.$$MAJOR_VER
MAJOR_VER=`sed 's/\([0-9][0-9]*\)\..*/\1/' $(srcdir)/VERSION`; \
ld -b $(LDFLAGS) -o libpcap.$$MAJOR_VER +h libpcap.$$MAJOR_VER \
$(OBJ) $(ADDLOBJS) $(LIBS)
#
# AIX is different from everybody else. A shared library is an archive
# library with one or more shared-object components. We still build a
# normal static archive library on AIX, for the benefit of the traditional
# scheme of building libpcap and tcpdump in subdirectories of the
# same directory, with tcpdump statically linked with the libpcap
# in question, but we also build a shared library as "libpcap.shareda"
# and install *it*, rather than the static library, as "libpcap.a".
#
libpcap.shareda: $(OBJ)
@rm -f $@ shr.o
$(CC) $(LDFLAGS) @V_SHLIB_OPT@ -o shr.o $(OBJ) $(ADDLOBJS) $(LIBS)
$(AR) rc $@ shr.o
#
# For platforms that don't support shared libraries (or on which we
# don't support shared libraries).
#
libpcap.none:
scanner.c: $(srcdir)/scanner.l
$(LEX) -P pcap_ --header-file=scanner.h --nounput -o scanner.c $<
scanner.h: scanner.c
## Recover from the removal of $@
@if test -f $@; then :; else \
rm -f scanner.c; \
$(MAKE) $(MAKEFLAGS) scanner.c; \
fi
scanner.o: scanner.c grammar.h
$(CC) $(FULL_CFLAGS) -c scanner.c
#
# Generate the grammar.y file.
#
# Some Makes, e.g. AIX Make and Solaris Make, can't handle "--file=$@.tmp:$<";
# for example, the Solaris 9 make man page says
#
# Because make assigns $< and $* as it would for implicit rules
# (according to the suffixes list and the directory contents),
# they may be unreliable when used within explicit target entries.
#
# and this is an explicit target entry.
#
# Therefore, instead of using $<, we explicitly put in $(srcdir)/libpcap.pc.in.
#
grammar.y: $(srcdir)/grammar.y.in ./config.status
@rm -f $@ $@.tmp
./config.status --file=$@.tmp:$(srcdir)/grammar.y.in
mv $@.tmp $@
grammar.c: grammar.y
$(YACC) -p pcap_ -o grammar.c -d $<
grammar.h: grammar.c
## Recover from the removal of $@
@if test -f $@; then :; else \
rm -f grammar.c; \
$(MAKE) $(MAKEFLAGS) grammar.c; \
fi
grammar.o: grammar.c scanner.h
$(CC) $(FULL_CFLAGS) -c grammar.c
gencode.o: $(srcdir)/gencode.c grammar.h scanner.h
$(CC) $(FULL_CFLAGS) -c $(srcdir)/gencode.c
asprintf.o: $(srcdir)/missing/asprintf.c
$(CC) $(FULL_CFLAGS) -o $@ -c $(srcdir)/missing/asprintf.c
snprintf.o: $(srcdir)/missing/snprintf.c
$(CC) $(FULL_CFLAGS) -o $@ -c $(srcdir)/missing/snprintf.c
strlcat.o: $(srcdir)/missing/strlcat.c
$(CC) $(FULL_CFLAGS) -o $@ -c $(srcdir)/missing/strlcat.c
strlcpy.o: $(srcdir)/missing/strlcpy.c
$(CC) $(FULL_CFLAGS) -o $@ -c $(srcdir)/missing/strlcpy.c
strtok_r.o: $(srcdir)/missing/strtok_r.c
$(CC) $(FULL_CFLAGS) -o $@ -c $(srcdir)/missing/strtok_r.c
#
# Generate the libpcap.pc file.
#
# Some Makes, e.g. AIX Make and Solaris Make, can't handle "--file=$@.tmp:$<";
# for example, the Solaris 9 make man page says
#
# Because make assigns $< and $* as it would for implicit rules
# (according to the suffixes list and the directory contents),
# they may be unreliable when used within explicit target entries.
#
# and this is an explicit target entry.
#
# Therefore, instead of using $<, we explicitly put in $(srcdir)/libpcap.pc.in.
#
libpcap.pc: $(srcdir)/libpcap.pc.in ./config.status
@rm -f $@ $@.tmp
./config.status --file=$@.tmp:$(srcdir)/libpcap.pc.in
mv $@.tmp $@
#
# Generate the pcap-config script. See above.
#
pcap-config: $(srcdir)/pcap-config.in ./config.status
@rm -f $@ $@.tmp
./config.status --file=$@.tmp:$(srcdir)/pcap-config.in
mv $@.tmp $@
chmod a+x $@
#
# Remote pcap daemon.
#
build-rpcapd: libpcap.a
cd rpcapd; $(MAKE)
#
# Test programs - not built by default, and not installed.
#
testprogs: FORCE
cd testprogs; $(MAKE)
FORCE:
install: install-shared install-archive libpcap.pc pcap-config @INSTALL_RPCAPD@
[ -d $(DESTDIR)$(libdir) ] || \
(mkdir -p $(DESTDIR)$(libdir); chmod 755 $(DESTDIR)$(libdir))
[ -d $(DESTDIR)$(includedir) ] || \
(mkdir -p $(DESTDIR)$(includedir); chmod 755 $(DESTDIR)$(includedir))
[ -d $(DESTDIR)$(includedir)/pcap ] || \
(mkdir -p $(DESTDIR)$(includedir)/pcap; chmod 755 $(DESTDIR)$(includedir)/pcap)
[ -d $(DESTDIR)$(mandir)/man1 ] || \
(mkdir -p $(DESTDIR)$(mandir)/man1; chmod 755 $(DESTDIR)$(mandir)/man1)
[ -d $(DESTDIR)$(mandir)/man3 ] || \
(mkdir -p $(DESTDIR)$(mandir)/man3; chmod 755 $(DESTDIR)$(mandir)/man3)
[ -d $(DESTDIR)$(mandir)/man@MAN_FILE_FORMATS@ ] || \
(mkdir -p $(DESTDIR)$(mandir)/man@MAN_FILE_FORMATS@; chmod 755 $(DESTDIR)$(mandir)/man@MAN_FILE_FORMATS@)
[ -d $(DESTDIR)$(mandir)/man@MAN_MISC_INFO@ ] || \
(mkdir -p $(DESTDIR)$(mandir)/man@MAN_MISC_INFO@; chmod 755 $(DESTDIR)$(mandir)/man@MAN_MISC_INFO@)
for i in $(PUBHDR); do \
$(INSTALL_DATA) $(srcdir)/$$i \
$(DESTDIR)$(includedir)/$$i; done
[ -d $(DESTDIR)$(bindir) ] || \
(mkdir -p $(DESTDIR)$(bindir); chmod 755 $(DESTDIR)$(bindir))
$(INSTALL_PROGRAM) pcap-config $(DESTDIR)$(bindir)/pcap-config
[ -d $(DESTDIR)$(libdir)/pkgconfig ] || \
(mkdir -p $(DESTDIR)$(libdir)/pkgconfig; chmod 755 $(DESTDIR)$(libdir)/pkgconfig)
$(INSTALL_DATA) libpcap.pc $(DESTDIR)$(libdir)/pkgconfig/libpcap.pc
for i in $(MAN1); do \
$(INSTALL_DATA) $(srcdir)/$$i \
$(DESTDIR)$(mandir)/man1/$$i; done
for i in $(MAN3PCAP_NOEXPAND); do \
$(INSTALL_DATA) $(srcdir)/$$i \
$(DESTDIR)$(mandir)/man3/$$i; done
for i in $(MAN3PCAP_EXPAND:.in=); do \
$(INSTALL_DATA) $$i \
$(DESTDIR)$(mandir)/man3/$$i; done
(cd $(DESTDIR)$(mandir)/man3 && \
rm -f pcap_datalink_val_to_description.3pcap && \
$(LN_S) pcap_datalink_val_to_name.3pcap \
pcap_datalink_val_to_description.3pcap && \
rm -f pcap_datalink_val_to_description_or_dlt.3pcap && \
$(LN_S) pcap_datalink_val_to_name.3pcap \
pcap_datalink_val_to_description_or_dlt.3pcap && \
rm -f pcap_dump_fopen.3pcap && \
$(LN_S) pcap_dump_open.3pcap pcap_dump_fopen.3pcap && \
rm -f pcap_freealldevs.3pcap && \
$(LN_S) pcap_findalldevs.3pcap pcap_freealldevs.3pcap && \
rm -f pcap_perror.3pcap && \
$(LN_S) pcap_geterr.3pcap pcap_perror.3pcap && \
rm -f pcap_sendpacket.3pcap && \
$(LN_S) pcap_inject.3pcap pcap_sendpacket.3pcap && \
rm -f pcap_free_datalinks.3pcap && \
$(LN_S) pcap_list_datalinks.3pcap pcap_free_datalinks.3pcap && \
rm -f pcap_free_tstamp_types.3pcap && \
$(LN_S) pcap_list_tstamp_types.3pcap pcap_free_tstamp_types.3pcap && \
rm -f pcap_dispatch.3pcap && \
$(LN_S) pcap_loop.3pcap pcap_dispatch.3pcap && \
rm -f pcap_minor_version.3pcap && \
$(LN_S) pcap_major_version.3pcap pcap_minor_version.3pcap && \
rm -f pcap_next.3pcap && \
$(LN_S) pcap_next_ex.3pcap pcap_next.3pcap && \
rm -f pcap_open_dead_with_tstamp_precision.3pcap && \
$(LN_S) pcap_open_dead.3pcap \
pcap_open_dead_with_tstamp_precision.3pcap && \
rm -f pcap_open_offline_with_tstamp_precision.3pcap && \
$(LN_S) pcap_open_offline.3pcap pcap_open_offline_with_tstamp_precision.3pcap && \
rm -f pcap_fopen_offline.3pcap && \
$(LN_S) pcap_open_offline.3pcap pcap_fopen_offline.3pcap && \
rm -f pcap_fopen_offline_with_tstamp_precision.3pcap && \
$(LN_S) pcap_open_offline.3pcap pcap_fopen_offline_with_tstamp_precision.3pcap && \
rm -f pcap_tstamp_type_val_to_description.3pcap && \
$(LN_S) pcap_tstamp_type_val_to_name.3pcap pcap_tstamp_type_val_to_description.3pcap && \
rm -f pcap_getnonblock.3pcap && \
$(LN_S) pcap_setnonblock.3pcap pcap_getnonblock.3pcap)
for i in $(MANFILE); do \
$(INSTALL_DATA) `echo $$i | sed 's/.manfile.in/.manfile/'` \
$(DESTDIR)$(mandir)/man@MAN_FILE_FORMATS@/`echo $$i | sed 's/.manfile.in/.@MAN_FILE_FORMATS@/'`; done
for i in $(MANMISC); do \
$(INSTALL_DATA) `echo $$i | sed 's/.manmisc.in/.manmisc/'` \
$(DESTDIR)$(mandir)/man@MAN_MISC_INFO@/`echo $$i | sed 's/.manmisc.in/.@MAN_MISC_INFO@/'`; done
install-shared: install-shared-$(DYEXT)
install-shared-so: libpcap.so
[ -d $(DESTDIR)$(libdir) ] || \
(mkdir -p $(DESTDIR)$(libdir); chmod 755 $(DESTDIR)$(libdir))
VER=`cat $(srcdir)/VERSION`; \
MAJOR_VER=`sed 's/\([0-9][0-9]*\)\..*/\1/' $(srcdir)/VERSION`; \
$(INSTALL_PROGRAM) libpcap.so.$$VER $(DESTDIR)$(libdir)/libpcap.so.$$VER; \
ln -sf libpcap.so.$$VER $(DESTDIR)$(libdir)/libpcap.so.$$MAJOR_VER; \
ln -sf libpcap.so.$$MAJOR_VER $(DESTDIR)$(libdir)/libpcap.so
install-shared-dylib: libpcap.dylib
[ -d $(DESTDIR)$(libdir) ] || \
(mkdir -p $(DESTDIR)$(libdir); chmod 755 $(DESTDIR)$(libdir))
VER=`cat $(srcdir)/VERSION`; \
MAJOR_VER=A; \
$(INSTALL_PROGRAM) libpcap.$$VER.dylib $(DESTDIR)$(libdir)/libpcap.$$VER.dylib; \
ln -sf libpcap.$$VER.dylib $(DESTDIR)$(libdir)/libpcap.$$MAJOR_VER.dylib; \
ln -sf libpcap.$$MAJOR_VER.dylib $(DESTDIR)$(libdir)/libpcap.dylib
install-shared-sl: libpcap.sl
[ -d $(DESTDIR)$(libdir) ] || \
(mkdir -p $(DESTDIR)$(libdir); chmod 755 $(DESTDIR)$(libdir))
MAJOR_VER=`sed 's/\([0-9][0-9]*\)\..*/\1/' $(srcdir)/VERSION`; \
$(INSTALL_PROGRAM) libpcap.$$MAJOR_VER $(DESTDIR)$(libdir)
ln -sf libpcap.$$MAJOR_VER $(DESTDIR)$(libdir)/libpcap.sl
install-shared-shareda: libpcap.shareda
#
# AIX shared libraries are weird. They're archive libraries
# with one or more shared object components.
#
[ -d $(DESTDIR)$(libdir) ] || \
(mkdir -p $(DESTDIR)$(libdir); chmod 755 $(DESTDIR)$(libdir))
$(INSTALL_PROGRAM) libpcap.shareda $(DESTDIR)$(libdir)/libpcap.a
install-shared-none:
install-archive: install-archive-$(DYEXT)
install-archive-so install-archive-dylib install-archive-sl install-archive-none: libpcap.a
#
# Most platforms have separate suffixes for shared and
# archive libraries, so we install both.
#
[ -d $(DESTDIR)$(libdir) ] || \
(mkdir -p $(DESTDIR)$(libdir); chmod 755 $(DESTDIR)$(libdir))
$(INSTALL_DATA) libpcap.a $(DESTDIR)$(libdir)/libpcap.a
$(RANLIB) $(DESTDIR)$(libdir)/libpcap.a
install-archive-shareda:
#
# AIX, however, doesn't, so we don't install the archive
# library on AIX.
#
install-rpcapd:
cd rpcapd; $(MAKE) DESTDIR=$(DESTDIR) install
uninstall: uninstall-shared uninstall-rpcapd
rm -f $(DESTDIR)$(libdir)/libpcap.a
for i in $(PUBHDR); do \
rm -f $(DESTDIR)$(includedir)/$$i; done
-rmdir $(DESTDIR)$(includedir)/pcap
rm -f $(DESTDIR)/$(libdir)/pkgconfig/libpcap.pc
rm -f $(DESTDIR)/$(bindir)/pcap-config
for i in $(MAN1); do \
rm -f $(DESTDIR)$(mandir)/man1/$$i; done
for i in $(MAN3PCAP); do \
rm -f $(DESTDIR)$(mandir)/man3/$$i; done
rm -f $(DESTDIR)$(mandir)/man3/pcap_datalink_val_to_description.3pcap
rm -f $(DESTDIR)$(mandir)/man3/pcap_datalink_val_to_description_or_dlt.3pcap
rm -f $(DESTDIR)$(mandir)/man3/pcap_dump_fopen.3pcap
rm -f $(DESTDIR)$(mandir)/man3/pcap_freealldevs.3pcap
rm -f $(DESTDIR)$(mandir)/man3/pcap_perror.3pcap
rm -f $(DESTDIR)$(mandir)/man3/pcap_sendpacket.3pcap
rm -f $(DESTDIR)$(mandir)/man3/pcap_free_datalinks.3pcap
rm -f $(DESTDIR)$(mandir)/man3/pcap_free_tstamp_types.3pcap
rm -f $(DESTDIR)$(mandir)/man3/pcap_dispatch.3pcap
rm -f $(DESTDIR)$(mandir)/man3/pcap_minor_version.3pcap
rm -f $(DESTDIR)$(mandir)/man3/pcap_next.3pcap
rm -f $(DESTDIR)$(mandir)/man3/pcap_open_dead_with_tstamp_precision.3pcap
rm -f $(DESTDIR)$(mandir)/man3/pcap_open_offline_with_tstamp_precision.3pcap
rm -f $(DESTDIR)$(mandir)/man3/pcap_fopen_offline.3pcap
rm -f $(DESTDIR)$(mandir)/man3/pcap_fopen_offline_with_tstamp_precision.3pcap
rm -f $(DESTDIR)$(mandir)/man3/pcap_getnonblock.3pcap
rm -f $(DESTDIR)$(mandir)/man3/pcap_tstamp_type_val_to_description.3pcap
for i in $(MANFILE); do \
rm -f $(DESTDIR)$(mandir)/man@MAN_FILE_FORMATS@/`echo $$i | sed 's/.manfile.in/.@MAN_FILE_FORMATS@/'`; done
for i in $(MANMISC); do \
rm -f $(DESTDIR)$(mandir)/man@MAN_MISC_INFO@/`echo $$i | sed 's/.manmisc.in/.@MAN_MISC_INFO@/'`; done
uninstall-shared: uninstall-shared-$(DYEXT)
uninstall-shared-so:
VER=`cat $(srcdir)/VERSION`; \
MAJOR_VER=`sed 's/\([0-9][0-9]*\)\..*/\1/' $(srcdir)/VERSION`; \
rm -f $(DESTDIR)$(libdir)/libpcap.so.$$VER; \
rm -f $(DESTDIR)$(libdir)/libpcap.so.$$MAJOR_VER; \
rm -f $(DESTDIR)$(libdir)/libpcap.so
uninstall-shared-dylib:
VER=`cat $(srcdir)/VERSION`; \
MAJOR_VER=A; \
rm -f $(DESTDIR)$(libdir)/libpcap.$$VER.dylib; \
rm -f $(DESTDIR)$(libdir)/libpcap.$$MAJOR_VER.dylib; \
rm -f $(DESTDIR)$(libdir)/libpcap.dylib
uninstall-shared-sl:
MAJOR_VER=`sed 's/\([0-9][0-9]*\)\..*/\1/' $(srcdir)/VERSION`; \
rm -f $(DESTDIR)$(libdir)/libpcap.$$MAJOR_VER; \
rm -f $(DESTDIR)$(libdir)/libpcap.sl
uninstall-shared-shareda:
rm -f $(DESTDIR)$(libdir)/libpcap.a
uninstall-shared-none:
uninstall-rpcapd:
cd rpcapd; $(MAKE) DESTDIR=$(DESTDIR) uninstall
clean:
rm -f $(CLEANFILES)
cd rpcapd; $(MAKE) clean
cd testprogs; $(MAKE) clean
distclean: clean
rm -f Makefile grammar.y config.cache config.log config.status \
config.h gnuc.h net os-proto.h libpcap.pc \
pcap-config stamp-h stamp-h.in
rm -f $(MAN3PCAP_EXPAND:.in=) $(MANFILE:.in=) $(MANMISC:.in=)
rm -rf autom4te.cache
cd rpcapd; $(MAKE) distclean
cd testprogs; $(MAKE) distclean
extags: $(TAGFILES)
ctags $(TAGFILES)
tags: $(TAGFILES)
ctags -wtd $(TAGFILES)
releasetar:
@autoreconf -f; \
name=$(PROG)-`cat VERSION` ; \
mkdir $$name; \
tar -c --exclude='*~' -f - $(COMMON_C_SRC) $(HDR) $(MAN1) \
$(MAN3PCAP_EXPAND) $(MAN3PCAP_NOEXPAND) $(MANFILE) \
$(MANMISC) $(EXTRA_DIST) | \
(cd $$name; tar xf -); \
tar -c -z -f $$name.tar.gz $$name; \
rm -rf $$name
rc1 rc2 rc3 rc4 rc5:
@VER=`cat $(srcdir)/VERSION`; \
sed -i "s/$$VER/$${VER}$@/" VERSION ; \
make releasetar; \
git checkout VERSION
depend: $(GENERATED_C_SRC) $(GENHDR)
$(MKDEP) -c "$(CC)" -m "$(DEPENDENCY_CFLAG)" -s "$(srcdir)" $(CFLAGS) $(DEFS) $(INCLS) $(SRC)
cd rpcapd; $(MAKE) depend
cd testprogs; $(MAKE) depend