You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
489 lines
17 KiB
489 lines
17 KiB
## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn547)
|
|
## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn547)
|
|
###############################################################################
|
|
# Application options
|
|
# Logging Levels
|
|
# NXPLOG_DEFAULT_LOGLEVEL 0x01
|
|
# ANDROID_LOG_DEBUG 0x03
|
|
# ANDROID_LOG_WARN 0x02
|
|
# ANDROID_LOG_ERROR 0x01
|
|
# ANDROID_LOG_SILENT 0x00
|
|
NXPLOG_EXTNS_LOGLEVEL=0x03
|
|
NXPLOG_NCIHAL_LOGLEVEL=0x03
|
|
NXPLOG_NCIX_LOGLEVEL=0x03
|
|
NXPLOG_NCIR_LOGLEVEL=0x03
|
|
NXPLOG_FWDNLD_LOGLEVEL=0x03
|
|
NXPLOG_TML_LOGLEVEL=0x03
|
|
|
|
###############################################################################
|
|
# Nfc Device Node name
|
|
NXP_NFC_DEV_NODE="/dev/pn553"
|
|
|
|
###############################################################################
|
|
# Extension for Mifare reader enable
|
|
MIFARE_READER_ENABLE=0x01
|
|
|
|
###############################################################################
|
|
# Vzw Feature enable
|
|
VZW_FEATURE_ENABLE=0x01
|
|
|
|
###############################################################################
|
|
# Firmware file type
|
|
#.so file 0x01
|
|
#.bin file 0x02
|
|
NXP_FW_TYPE=0x01
|
|
|
|
###############################################################################
|
|
# System clock source selection configuration
|
|
#define CLK_SRC_XTAL 1
|
|
#define CLK_SRC_PLL 2
|
|
NXP_SYS_CLK_SRC_SEL=0x02
|
|
|
|
###############################################################################
|
|
# System clock frequency selection configuration
|
|
#define CLK_FREQ_13MHZ 1
|
|
#define CLK_FREQ_19_2MHZ 2
|
|
#define CLK_FREQ_24MHZ 3
|
|
#define CLK_FREQ_26MHZ 4
|
|
#define CLK_FREQ_38_4MHZ 5
|
|
#define CLK_FREQ_52MHZ 6
|
|
NXP_SYS_CLK_FREQ_SEL=0x02
|
|
|
|
###############################################################################
|
|
# The timeout value to be used for clock request acknowledgment
|
|
# min value = 0x01 to max = 0x06
|
|
NXP_SYS_CLOCK_TO_CFG=0x06
|
|
|
|
###############################################################################
|
|
# NXP proprietary settings
|
|
NXP_ACT_PROP_EXTN={2F, 02, 00}
|
|
|
|
###############################################################################
|
|
# NFC forum profile settings
|
|
NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00}
|
|
|
|
###############################################################################
|
|
# NFCC Configuration Control
|
|
# Allow NFCC to manage RF Config 0x01
|
|
# Don't allow NFCC to manage RF Config 0x00
|
|
NXP_NFC_MERGE_RF_PARAMS={20, 02, 04, 01, 85, 01, 01}
|
|
|
|
###############################################################################
|
|
# Standby enable settings
|
|
#NXP_CORE_STANDBY={2F, 00, 01, 01}
|
|
|
|
###############################################################################
|
|
# NXP TVDD configurations settings
|
|
# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported,
|
|
# out of them only one can be configured at a time.
|
|
NXP_EXT_TVDD_CFG=0x02
|
|
|
|
###############################################################################
|
|
#config1:SLALM, 3.3V for both RM and CM
|
|
NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C}
|
|
|
|
###############################################################################
|
|
#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM,
|
|
#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms
|
|
NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C}
|
|
|
|
###############################################################################
|
|
# NXP RF configuration ALM/PLM settings
|
|
# This section needs to be updated with the correct values based on the platform
|
|
#NXP_RF_CONF_BLK_1={
|
|
#}
|
|
|
|
###############################################################################
|
|
# NXP RF configuration ALM/PLM settings
|
|
# This section needs to be updated with the correct values based on the platform
|
|
#NXP_RF_CONF_BLK_2={
|
|
#}
|
|
|
|
###############################################################################
|
|
# NXP RF configuration ALM/PLM settings
|
|
# This section needs to be updated with the correct values based on the platform
|
|
#NXP_RF_CONF_BLK_3={
|
|
#}
|
|
|
|
###############################################################################
|
|
# NXP RF configuration ALM/PLM settings
|
|
# This section needs to be updated with the correct values based on the platform
|
|
#NXP_RF_CONF_BLK_4={
|
|
#}
|
|
|
|
###############################################################################
|
|
# NXP RF configuration ALM/PLM settings
|
|
# This section needs to be updated with the correct values based on the platform
|
|
#NXP_RF_CONF_BLK_5={
|
|
#}
|
|
|
|
###############################################################################
|
|
# NXP RF configuration ALM/PLM settings
|
|
# This section needs to be updated with the correct values based on the platform
|
|
#NXP_RF_CONF_BLK_6={
|
|
#}
|
|
|
|
###############################################################################
|
|
# Set configuration optimization decision setting
|
|
# Enable = 0x01
|
|
# Disable = 0x00
|
|
NXP_SET_CONFIG_ALWAYS=0x00
|
|
|
|
###############################################################################
|
|
# Core configuration extensions
|
|
# It includes
|
|
# Wired mode settings A0ED, A0EE
|
|
# Tag Detector A040, A041, A043
|
|
# Low Power mode A007
|
|
# Clock settings A002, A003
|
|
# PbF settings A008
|
|
# Clock timeout settings A004
|
|
# eSE (SVDD) PWR REQ settings A0F2
|
|
# Window size A0D8
|
|
# DWP Speed A0D5
|
|
# How eSE connected to PN553 A012
|
|
# UICC2 bit rate A0D1
|
|
# SWP1A interface A0D4
|
|
# DWP intf behavior config, SVDD Load activated by default if set to 0x31 A037
|
|
NXP_CORE_CONF_EXTN={20, 02, 29, 0A,
|
|
A0, EC, 01, 01,
|
|
A0, ED, 01, 01,
|
|
A0, 5E, 01, 01,
|
|
A0, 12, 01, 02,
|
|
A0, 40, 01, 01,
|
|
A0, D1, 01, 02,
|
|
A0, D4, 01, 01,
|
|
A0, 37, 01, 35,
|
|
A0, D8, 01, 02,
|
|
A0, D5, 01, 0A
|
|
}
|
|
# A0, F2, 01, 01,
|
|
# A0, 40, 01, 01,
|
|
# A0, 41, 01, 02,
|
|
# A0, 43, 01, 04,
|
|
# A0, 02, 01, 01,
|
|
# A0, 03, 01, 11,
|
|
# A0, 07, 01, 03,
|
|
# A0, 08, 01, 01
|
|
# }
|
|
|
|
###############################################################################
|
|
# Core configuration rf field filter settings to enable set to 01 to disable set
|
|
# to 00 last bit
|
|
NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00 }
|
|
|
|
###############################################################################
|
|
# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set
|
|
# to 0x00
|
|
NXP_I2C_FRAGMENTATION_ENABLED=0x00
|
|
|
|
###############################################################################
|
|
# Core configuration settings
|
|
NXP_CORE_CONF={ 20, 02, 2E, 0E,
|
|
28, 01, 00,
|
|
21, 01, 00,
|
|
30, 01, 08,
|
|
31, 01, 03,
|
|
32, 01, 60,
|
|
38, 01, 01,
|
|
33, 04, 01, 02, 03, 04,
|
|
54, 01, 06,
|
|
50, 01, 02,
|
|
5B, 01, 00,
|
|
80, 01, 01,
|
|
81, 01, 01,
|
|
82, 01, 0E,
|
|
18, 01, 01
|
|
}
|
|
|
|
###############################################################################
|
|
# Mifare Classic Key settings
|
|
#NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5,
|
|
# A0, 52, 06, D3, F7, D3, F7, D3, F7,
|
|
# A0, 53, 06, FF, FF, FF, FF, FF, FF,
|
|
# A0, 54, 06, 00, 00, 00, 00, 00, 00}
|
|
|
|
###############################################################################
|
|
# Default SE Options
|
|
# No secure element 0x00
|
|
# eSE 0x01
|
|
# UICC 0x02
|
|
# UICC2 0x04
|
|
NXP_DEFAULT_SE=0x07
|
|
|
|
###############################################################################
|
|
#Enable SWP full power mode when phone is power off
|
|
NXP_SWP_FULL_PWR_ON=0x00
|
|
|
|
###############################################################################
|
|
#### Select the CHIP ####
|
|
#PN547C2 0x01
|
|
#PN65T 0x02
|
|
#PN548AD 0x03
|
|
#PN66T 0x04
|
|
#PN551 0x05
|
|
#PN67T 0x06
|
|
#PN553 0x07
|
|
#PN80T 0x08
|
|
NXP_NFC_CHIP=0x08
|
|
|
|
###############################################################################
|
|
# CE when Screen state is locked
|
|
# This setting is for DEFAULT_AID_ROUTE,
|
|
# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE
|
|
# Disable 0x00
|
|
# Enable 0x01
|
|
NXP_CE_ROUTE_STRICT_DISABLE=0x01
|
|
|
|
###############################################################################
|
|
#Timeout in secs to get NFCEE Discover notification
|
|
NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20
|
|
|
|
###############################################################################
|
|
NXP_DEFAULT_NFCEE_TIMEOUT=20
|
|
|
|
###############################################################################
|
|
#Timeout in secs
|
|
NXP_SWP_RD_START_TIMEOUT=0x0A
|
|
|
|
###############################################################################
|
|
#Timeout in secs
|
|
NXP_SWP_RD_TAG_OP_TIMEOUT=0x01
|
|
|
|
###############################################################################
|
|
#Set the default AID route Location :
|
|
#This settings will be used when application does not set this parameter
|
|
# host 0x00
|
|
# eSE 0x01
|
|
# UICC 0x02
|
|
# UICC2 0x03
|
|
DEFAULT_AID_ROUTE=0x00
|
|
|
|
###############################################################################
|
|
#Set the Mifare Desfire route Location :
|
|
#This settings will be used when application does not set this parameter
|
|
# host 0x00
|
|
# eSE 0x01
|
|
# UICC 0x02
|
|
# UICC2 0x03
|
|
DEFAULT_DESFIRE_ROUTE=0x02
|
|
|
|
###############################################################################
|
|
#Set the Mifare CLT route Location :
|
|
#This settings will be used when application does not set this parameter
|
|
# host 0x00
|
|
# eSE 0x01
|
|
# UICC 0x02
|
|
# UICC2 0x03
|
|
DEFAULT_MIFARE_CLT_ROUTE=0x02
|
|
|
|
###############################################################################
|
|
#Set the Felica CLT route Location :
|
|
#This settings will be used when application does not set this parameter
|
|
# eSE 0x01
|
|
# UICC 0x02
|
|
# UICC2 0x03
|
|
DEFAULT_FELICA_CLT_ROUTE=0x01
|
|
|
|
###############################################################################
|
|
#Set the default AID Power state :
|
|
#This settings will be used when application does not set this parameter
|
|
# bit pos 0 = Switch On
|
|
# bit pos 1 = Switch Off
|
|
# bit pos 2 = Battery Off
|
|
# bit pos 3 = Screen Lock
|
|
# bit pos 4 = Screen Off
|
|
DEFAULT_AID_PWR_STATE=0x19
|
|
|
|
###############################################################################
|
|
#Set the Mifare Desfire Power state :
|
|
#This settings will be used when application does not set this parameter
|
|
# bit pos 0 = Switch On
|
|
# bit pos 1 = Switch Off
|
|
# bit pos 2 = Battery Off
|
|
# bit pos 3 = Screen Lock
|
|
# bit pos 4 = Screen Off
|
|
DEFAULT_DESFIRE_PWR_STATE=0x1B
|
|
|
|
###############################################################################
|
|
#Set the Mifare CLT Power state :
|
|
#This settings will be used when application does not set this parameter
|
|
# bit pos 0 = Switch On
|
|
# bit pos 1 = Switch Off
|
|
# bit pos 2 = Battery Off
|
|
# bit pos 3 = Screen Lock
|
|
# bit pos 4 = Screen Off
|
|
DEFAULT_MIFARE_CLT_PWR_STATE=0x1B
|
|
|
|
###############################################################################
|
|
#Set the Felica CLT Power state :
|
|
#This settings will be used when application does not set this parameter
|
|
# bit pos 0 = Switch On
|
|
# bit pos 1 = Switch Off
|
|
# bit pos 2 = Battery Off
|
|
# bit pos 3 = Screen Lock
|
|
# bit pos 4 = Screen Off
|
|
DEFAULT_FELICA_CLT_PWR_STATE=0x1B
|
|
|
|
###############################################################################
|
|
# AID Matching platform options
|
|
# AID_MATCHING_L 0x01
|
|
# AID_MATCHING_K 0x02
|
|
AID_MATCHING_PLATFORM=0x01
|
|
|
|
###############################################################################
|
|
# P61 interface options
|
|
# NFC 0x01
|
|
# SPI 0x02
|
|
NXP_P61_LS_DEFAULT_INTERFACE=0x01
|
|
|
|
###############################################################################
|
|
# P61 LTSM interface options
|
|
# NFC 0x01
|
|
# SPI 0x02
|
|
NXP_P61_LTSM_DEFAULT_INTERFACE=0x01
|
|
|
|
###############################################################################
|
|
#CHINA_TIANJIN_RF_SETTING
|
|
#Enable 0x01
|
|
#Disable 0x00
|
|
NXP_CHINA_TIANJIN_RF_ENABLED=0x01
|
|
|
|
###############################################################################
|
|
#SWP_SWITCH_TIMEOUT_SETTING
|
|
# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60].
|
|
# Timeout in milliseconds, for example
|
|
# No Timeout 0x00
|
|
# 10 millisecond timeout 0x0A
|
|
NXP_SWP_SWITCH_TIMEOUT=0x0A
|
|
|
|
###############################################################################
|
|
# P61 interface options for JCOP Download
|
|
# NFC 0x01
|
|
# SPI 0x02
|
|
NXP_P61_JCOP_DEFAULT_INTERFACE=0x01
|
|
|
|
###############################################################################
|
|
# P61 JCOP OS download options
|
|
# FRAMEWORK API BY APPLICATION 0x00
|
|
# AT BOOT_TIME 0x01
|
|
NXP_JCOPDL_AT_BOOT_ENABLE=0x00
|
|
|
|
###############################################################################
|
|
# Loader service version
|
|
# NFC service checks for LS version 2.0 or 2.1
|
|
# LS2.0 0x20
|
|
# LS2.1 0x21
|
|
# LS2.2 0x22
|
|
# AT NFC service intialization
|
|
NXP_LOADER_SERVICE_VERSION=0x22
|
|
|
|
###############################################################################
|
|
#Timeout value in milliseconds for NFCC standby mode.The range is between 5000
|
|
#msec to 20000 msec and zero is to disable.
|
|
NXP_NFCC_STANDBY_TIMEOUT=20000
|
|
|
|
###############################################################################
|
|
#Dynamic RSSI feature enable
|
|
# Disable 0x00
|
|
# Enable 0x01
|
|
NXP_AGC_DEBUG_ENABLE=0x00
|
|
|
|
###############################################################################
|
|
#Virtual Mode ESE and Wired Mode ongoing delay Wired Mode
|
|
# For Technology routing to ESE Technology Mask = 4
|
|
# For ISO-DEP Protocol routing to ESE Mask = 2
|
|
# It can also take TECH|PROTO = 6
|
|
# To ignore the delay set mask to = 0
|
|
NXP_ESE_WIRED_PRT_MASK=0x00
|
|
|
|
###############################################################################
|
|
#Virtual Mode UICC and Wired Mode ongoing delay Wired Mode
|
|
#For Technology routing to UICC Technology Mask = 4
|
|
#For ISO-DEP Protocol routing to UICC set Mask = 2
|
|
#For Select AID Routing to UICC set Mask = 1
|
|
#It can also take values TECH|PROTO|SELECT_AID = 7 , 6 , 5 ,3 .To ignore delay
|
|
#set mask = 0
|
|
NXP_UICC_WIRED_PRT_MASK=0x00
|
|
|
|
################################################################################
|
|
#RF field true delay Wired Mode
|
|
# delay wired mode = 1
|
|
# allow wired mode = 0
|
|
NXP_WIRED_MODE_RF_FIELD_ENABLE=0x00
|
|
|
|
###############################################################################
|
|
#Config to allow adding aids
|
|
#NFC on/off is required after this config
|
|
#1 = enabling adding aid to NFCC routing table.
|
|
#0 = disabling adding aid to NFCC routing table.
|
|
NXP_ENABLE_ADD_AID=0x01
|
|
|
|
###############################################################################
|
|
# JCOP-3.3 continuous process timeout in msec and value should be in Hexadecimal
|
|
# JCOP CP TIMEOUT
|
|
NXP_CP_TIMEOUT={00, 77}
|
|
|
|
###############################################################################
|
|
# Enable/Disable checking default proto SE Id
|
|
# Disable 0x00
|
|
# Enable 0x01
|
|
NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01
|
|
|
|
###############################################################################
|
|
#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE
|
|
#Enable/Disable block number checks for china transit use case
|
|
#Enable 0x01
|
|
#Disable 0x00
|
|
NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01
|
|
|
|
###############################################################################
|
|
# Wired mode resume timeout vaule in wired mode resume feature enable
|
|
# DWP resume time out in ms( 4 bytes hex value and LSB first)
|
|
#example 1000 = 0x03E8
|
|
#exmaple 2000 = 0x07D0
|
|
#example 500 = 0x01F4
|
|
NXP_WIREDMODE_RESUME_TIMEOUT={E8,03,00,00}
|
|
###############################################################################
|
|
# Power to eSE is controlled by DH or PMU depending on following configurations
|
|
#define DH_PWR_CONTROL 1
|
|
#define PMU_PWR_CONTROL 2
|
|
NXP_ESE_POWER_DH_CONTROL=1
|
|
|
|
###############################################################################
|
|
# Timeout value in milliseconds for wired mode resume after RF field event timeout
|
|
NXP_NFCC_RF_FIELD_EVENT_TIMEOUT=3000
|
|
|
|
###############################################################################
|
|
# NXP PMU Support configuration is sent if PMU_PWR_CONTROL is configured
|
|
# External PMU available in phone ON and phone OFF case if NXP_ESE_POWER_EXT_PMU=1
|
|
# External PMU available only in phone ON case if NXP_ESE_POWER_EXT_PMU=2
|
|
NXP_ESE_POWER_EXT_PMU=2
|
|
|
|
###############################################################################
|
|
# Whether to allow wired mode in desfire and mifare CLT
|
|
# Disable 0x00
|
|
# Enable 0x01
|
|
NXP_ALLOW_WIRED_IN_MIFARE_DESFIRE_CLT=0x00
|
|
|
|
###############################################################################
|
|
# Restrict routing to first matched rule only.
|
|
# Blacklist enable 0x01
|
|
# Blacklist disable 0x00
|
|
NXP_PROP_BLACKLIST_ROUTING=0x00
|
|
|
|
###############################################################################
|
|
# Send DWP interface reset command as part of SE open
|
|
# Disable 0x00
|
|
# Enable 0x01
|
|
NXP_DWP_INTF_RESET_ENABLE=0x01
|
|
|
|
###############################################################################
|
|
# Timeout value in milliseconds for JCOP OS download to complete
|
|
OS_DOWNLOAD_TIMEOUT_VALUE=60000
|
|
|
|
###############################################################################
|
|
# Timeout value in milliseconds to send response for Felica command received
|
|
NXP_HCEF_CMD_RSP_TIMEOUT_VALUE=5000
|
|
|
|
############################################################################### |